The two Washington onboarding violations to avoid are asking a new hire to sign a prohibited agreement provision and trying to enforce one. Recruiters usually think of the onboarding packet as paperwork. There is the offer letter, the handbook acknowledgment, the tax forms, and often a confidentiality agreement that someone copied from an old form. For Washington hires, some of that paperwork carries legal risk. This post covers two violations under chapter 49.44 RCW that are easy to commit without meaning to. It also covers the carve-outs the same chapter keeps, so you can protect real business information without crossing the line. This post is a practical guide, not a substitute for a lawyer's review. Read the statute itself, and talk with a Washington employment lawyer before you change a form you use across hires.
Key takeaways
- Do not ask a new hire to sign a provision that chapter 49.44 RCW prohibits, even as an optional request.
- Do not try to enforce a prohibited provision by lawsuit, threat, or any other attempt to influence compliance.
- Protect trade secrets and confidential information that does not involve illegal acts.
- Send every unclear clause to counsel before the packet goes out.
Does Washington law limit what goes into onboarding agreements?
Yes. Chapter 49.44 RCW restricts certain agreement provisions that an employer may not ask an employee to sign, and it also restricts how an employer may try to enforce them. The statute keys its ban to any "agreement provision that is prohibited by this section," so the test is the statute's text, not your own paperwork. Read the current text of the chapter and check every clause in your packet against it. Do not assume a clause is fine because a vendor or a previous employer used it.
Two violations come from subsections (4) and (5). Subsection (4) covers requests for a prohibited provision, and subsection (5) covers attempts to enforce one. Those are the two violations this post walks through.
Is it a violation to ask a new hire to sign a prohibited provision?
Yes. Subsection (4) says: "It is a violation of this section for an employer to request or require that an employee enter into any agreement provision that is prohibited by this section." The words "request or require" matter. A recruiter might think that labeling a clause optional, or sending it as a polite "please sign" rather than a condition of hire, avoids the problem. The quoted text does not support that comfort, because a request is covered on its own terms.
In practice this often appears in three places: a confidentiality form copied from another company or another state, a handbook acknowledgment that carries an agreement section, and a side letter added for a senior hire. Each one is an agreement the employer asks the employee to enter into, so each one needs review.
Before the packet goes out, pull every document a new hire is asked to sign, including e-signature bundles and portal click-throughs. Mark each clause that restricts what the employee may say, share, or do after employment. Check each marked clause against the statute text. If a clause is prohibited, take it out of the document set. Adding a note that calls it optional does not fix the problem, because the note is still a request for the employee to sign. Removal is simpler to defend than a footnote.
What counts as trying to enforce a prohibited provision?
Subsection (5) answers this with a broad list. It says: "It is a violation of this section for an employer to attempt to enforce a provision of an agreement prohibited by this section, whether through a lawsuit, a threat to enforce, or any other attempt to influence a party to comply with a provision in any agreement that is prohibited by this section."
Three things stand out. First, a lawsuit is only one example. Second, a threat to enforce counts on its own. Third, the phrase "any other attempt to influence a party to comply" is wide enough to reach letters, calls, and messages that never mention a court.
Enforcement problems can also come after the hire has left. A former employee receives a letter reminding them of a clause in their onboarding agreement and warning of consequences. An exit interview includes a remark that the employee still has obligations under a prohibited term. A reference call goes out with a warning attached. Each of these may count as an attempt to influence compliance, depending on the wording.
Keep these in mind when a former employee raises a clause. Do not send a stock reminder letter from an old form. Route any letter that mentions a clause to counsel first, and make sure the reply says nothing that could be read as a threat.
Can an employer still protect trade secrets and confidential information?
Yes, within limits. Subsection (6) says the section "does not prohibit an employer and an employee from protecting trade secrets, proprietary information, or confidential information that does not involve illegal acts." That carve-out is important. A clause aimed at real business information, such as customer pricing, source code, product plans, or unpublished financials, is a different thing from a clause that reaches everything an employee happens to know.
The limit matters too. The protection covers only information "that does not involve illegal acts." Information involving illegal acts falls outside that carve-out, so a clause that reaches it is not covered by subsection (6). Write the agreement to name the categories of information it protects, and tie each category to a real business interest.
Are settlement amounts covered?
Settlement amounts get separate treatment. Subsection (2) provides that the section "does not prohibit the enforcement of a provision in any agreement that prohibits the disclosure of the amount paid in settlement of a claim." A clause limited to that amount is therefore not barred by this section. The quote speaks only to the amount, so do not read it as approving every confidentiality term in a settlement agreement.
What happens if an employer sues over a prohibited provision?
The chapter includes a fee rule. Under it, a prevailing party against whom an action has been brought for a violation of RCW 49.44.200 can be awarded reasonable expenses and attorneys' fees under RCW 4.84.185, but only "upon final judgment and written findings by the trial judge that the action was frivolous and advanced without reasonable cause."
The rule is narrow. Losing the case alone does not trigger a fee award under this language, because the trial judge must also find the action frivolous and advanced without reasonable cause. A weak demand letter or a shaky lawsuit is still a poor bet, but the larger risk in onboarding is the violation itself.
How do I sort clauses that fall in the gray area?
Send each one to counsel with the exact text, the document it sits in, and the point in the process where a hire would sign it. The subsections quoted in this post do not name clause types such as non-solicitation promises, return-of-property duties, or cooperation requirements, so the statute text here cannot tell you whether those clauses fall inside the ban. Treat each one as a question for a lawyer, not a judgment call for a recruiter.
Clear cases are easier. A clause that bars an employee from disclosing a settlement amount is addressed by the settlement subsection, and a clause that protects a customer list may fall under subsection (6). The gray area is everything else.
When you write up a question for counsel, quote the clause word for word. Paraphrases hide the details that matter, such as who the restriction protects, how long it lasts, and whether it applies after the hire leaves. Include the form name and version number so counsel can confirm which document a hire actually received. Ask for a short written answer on each clause, and file it with the form. That file becomes the record you check the next time the form changes.
Does this apply to contractors and temporary workers?
The quoted text speaks to employers and employees, so a contractor agreement or a staffing-agency agreement is a different question that needs its own review.
Start by confirming how the person is classified and which packet they will actually receive. A person labeled a contractor may still receive a document that reads like an employee packet, and it is worth checking that document against the same questions.
Staffing firms add another layer. If you place workers through an agency, the agency's paperwork and yours may both be in play, and each party should know which document it is responsible for.
Do not stretch this post to cover a document the chapter does not describe. If a question comes up about a non-compete or a freelance IP assignment, the sources in this post say nothing about it, so send it to counsel as a separate question.
What should a clean packet look like?
A clean packet contains only the documents the employer needs for the hire, and each one has a plain purpose that a recruiter can state in a sentence.
Start with a basic set: the offer letter, the tax and payroll forms, and a signed handbook acknowledgment. For the limits on what else you may request, see onboarding document request limits. Keep the handbook acknowledgment separate from any agreement. If a handbook contains restrictive language, take it out of the acknowledgment and have counsel review it before it goes anywhere near the packet.
A confidentiality agreement should list its categories of protected information within the agreement itself. A short list with business reasons beside each item is easier to defend than a catch-all that covers everything an employee learns. This ties back to the trade secret carve-out in subsection (6), which allows protection of information that does not involve illegal acts.
Leave out clauses that do not connect to the job. If a clause would be hard to explain to the new hire in one sentence, it is probably not ready for the packet. Ask a hiring manager to describe what each signature page is for, and rewrite any page they cannot explain.
Finally, keep the packet short enough that a new hire can actually read it before signing.
What should I do with an inherited form?
Treat it as unreviewed until someone has compared every clause with the statute text.
Start by finding out where the form came from. A form copied from a former employer, a vendor, or a form library may reflect rules from another state or another year. Write the source on the file, then compare each clause using the same steps as the packet review later in this post.
When you find a clause that the review flags, stop using the form for new hires right away. Do not simply swap in a version that moves the same restriction into a different document.
Ask counsel a separate question about people who already signed the old version. The sources in this post address requests and enforcement, but they do not say what an employer should do for people who have already signed, so that answer needs a lawyer who knows the facts of your company.
Record when you retired the old form and who approved its replacement.
Who should own the review on a recruiting team?
Recruiting can own the packet, but counsel should own the list of clauses that go into it.
Splitting the work this way keeps the people who know the hiring process in charge of the paperwork, while the people trained to read the statute decide what is allowed. A recruiter who finds an unfamiliar clause in a vendor form should not decide on their own that it is fine.
Write the split into a short procedure. Name who maintains the form library, who reviews changes, who signs off on new clauses, and who answers questions from hiring managers. Put the procedure in the same folder as the approved packet so that anyone who opens the packet can find it.
Hiring managers need a short script too. A manager who asks for a special side letter for a senior hire should send that request to the same review queue as any other change, rather than adding the letter at the last minute before the start date.
How should I review the packet before it goes out?
Review the full packet against subsections (2) and (4) through (6) before the first offer goes out, and again whenever the form changes. For a separate set of checks on hourly new hires in Washington and New York, see hourly new hire checks for Washington and New York. Use this sequence:
- list every document and click-through a new hire sees, including handbook acknowledgments, e-signature forms, and side letters.
- mark any clause that limits what the employee may say, share, or do after employment.
- sort each marked clause into one of three groups: protection for trade secrets or confidential business information, a settlement-amount clause, or everything else.
- send anything in the last group to counsel, and remove or rewrite it before the packet is sent.
- record who approved the final version and when.
- add a rule that no one sends a letter about a clause, to a current or former employee, without counsel review.
Last, keep a copy of the statute text in the review file and recheck it when the law changes.
Illustrative example: a 10-document packet
Suppose a recruiter reviews a packet of 10 documents. Eight of them are standard: the offer letter, the tax and payroll forms, and a handbook acknowledgment with no restrictive language. Two contain clauses that limit what the employee may say or share after employment. Counsel reviews both. One clause protects a short list of customer pricing and product plans, which fits the carve-out for confidential business information. The other reaches anything the employee happens to know, so counsel removes it before the packet goes out. The recruiter then records who approved the final version and when.
Your next step
Today, pull every document and click-through a new hire sees, and mark each clause that limits what the employee may say, share, or do after employment.
Related guides: Arizona employer penalties: 4 violation rules to know · Employer coverage log: 7 fields from state statutes.
Frequently asked questions
Can I ask for a prohibited clause if it is labeled optional?
Labeling a prohibited clause optional does not remove the violation, because subsection (4) covers requests as well as requirements.
Is a settlement amount clause covered by this section?
A clause limited to the settlement amount is not barred by this section, because subsection (2) allows its enforcement.
Does losing a lawsuit over a prohibited clause mean the employer pays fees?
Not by itself: fee awards require a final judgment and written findings that the action was frivolous and advanced without reasonable cause.
The two violations are simple to state. Do not ask a new hire to sign a prohibited provision, and do not try to enforce one, whether by lawsuit, by threat, or by any other attempt to influence compliance. Keep the trade secret carve-out for real business information, and check the packet before it goes out. Then read the statute itself at chapter 49.44 RCW.
General information, not legal or tax advice.