For hourly new hires in Washington and New York, check sick leave notice, short-break pay, and written policy notices before the first shift.
Key takeaways
- Confirm how paid sick leave notice works in Washington.
- Set break pay rules for New York.
- Put your policies in writing and make sure every new hire receives them.
Why hourly onboarding needs its own checklist
Imagine an hourly hire with little time for orientation. They get a badge, a schedule, a quick tour of the break room, and a manager who says "you'll pick it up as you go." That approach works until someone calls in sick for the first time, asks about a short break they were not sure they could take, or wonders why a paycheck looks different from what they expected. At that point, the gap between what managers say and what your written policies say becomes a real problem for everyone involved.
Each check is tied to a rule in an official source. Where we make a general point about good onboarding practice rather than stating a legal requirement, we say so. Nothing here is legal advice. Treat the linked pages as the authority, and check them again before you finalize your forms, because rules change.
Check 1: confirm how paid sick leave notice works in Washington
Washington requires employers to provide paid sick leave, and the requirement began January 1, 2018. The statute, RCW 49.46.020, states: "Beginning January 1, 2018, except as provided in RCW 49.46.180, every employer must provide to each of its employees paid sick leave as provided in RCW 49.46.200 and 49.46.210." The statute refers to RCW 49.46.180, RCW 49.46.200 and RCW 49.46.210. This post does not cover those details, so read those sections before you write your leave policy.
Notice is where many onboarding packets go wrong. The state's rule on notice, found in WAC 296-128-650, has two parts that affect what you put on paper.
The first part concerns whether you can require notice at all. The regulation says: "Employers must have a written policy or a collective bargaining agreement outlining any requirements of an employee to give reasonable notice for the use of paid sick leave, and must make notification of such policy or agreement, prior to requiring an employee to provide reasonable notice." In plain terms, a notice requirement needs to be written down, and employees need to be told about it before you hold them to it. An oral mention alone does not replace a written policy or collective bargaining agreement. Build the rule into your written policy and deliver it during onboarding.
The second part sets a default timeline. The regulation says: "Unless the employer allows less advance notice, the employee must provide notice at least ten days, or as early as practicable, in advance of the use of paid sick leave." Read that sentence slowly. An employer can allow less advance notice, and the policy should say so clearly if it does. The phrase "or as early as practicable" means that an employee who learns of a need late is still expected to give notice as soon as they reasonably can. For hourly staff on short-notice schedules, a ten-day requirement can be impractical, which is one reason an employer may choose to allow shorter notice. As an onboarding practice, explain your chosen notice period clearly to hires and supervisors.
Here is what that looks like during onboarding:
- Decide whether your policy requires advance notice, and if so, what period it sets. Write it in plain words.
- Give each Washington hire a copy of the policy before their first shift, and get a signed or dated acknowledgment.
- Explain what to do when illness comes up without warning. The "as early as practicable" language is the reason this scenario matters, so your policy should cover it directly.
- Tell shift leads and schedulers the same rule. If your policy allows less than ten days, a scheduler who tells a new hire they must give ten days is giving wrong guidance.
- Log sick leave requests with the date the request was made and the date of the shift. That record is what you will need if a question comes up later.
Washington wage rules belong in the onboarding conversation too, because they set what you pay. Under RCW 49.46.020, the state sets a minimum wage for employees who have reached the age of eighteen. The statute began with fixed rates for its early years and then moved to a schedule under which the rate is set for each year beginning January 1, 2021. Those earlier fixed rates show how the schedule began, but they are not the rate for a hire today. Look up the current amount on the state's page before you set any offer, and confirm your payroll system updates the rate each January 1st. For anyone younger than eighteen, check the statute, because the quoted rate language applies to employees who have reached that age. Use the state minimum wage checks when preparing the hourly offer.
Check 2: set break pay rules for New York
New York handles breaks differently from what many managers expect. The New York State Department of Labor's Wages and Hours FAQ says: "Employers do not have to provide other "breaks", such as for "rest periods" or "coffee breaks." But, if an employer permits a break (of up to 20 minutes), then they should pay it as work time."
Read that as two separate decisions:
- Whether you offer short breaks at all.
- How you time and pay the breaks you do offer.
If you allow a break longer than 20 minutes, check the state's guidance or talk to counsel before you assume it is unpaid. Do not treat the absence of a stated rule as permission to dock pay.
This matters most in timekeeping. If your timeclock automatically deducts unpaid breaks, review its settings. If a new hire works a shift where a short permitted break is deducted automatically, you may be underpaying them. Check your settings before the first shift, not after the first complaint. The time clock setup guide can help you review the payroll process.
Onboarding steps for New York:
- Write a plain list of the breaks you offer, their length, and whether each one is paid. Hand it to every new hire.
- Confirm the timeclock or scheduling software records permitted breaks of up to 20 minutes as paid work time.
- Tell managers not to describe breaks as unpaid in general terms. A statement like "breaks are off the clock" may be wrong for the short breaks the guidance covers.
- Apply the break practice the same way on every shift. Hourly staff notice quickly when one crew gets a break and another does not, and uneven practice is a common starting point for disputes.
- If a hire asks about a break you have not described in writing, answer in writing. A written answer protects both sides.
A common mistake is treating break rules as a one-time setup. Break practice drifts as shifts change, as a busy team stops taking breaks, or as a supervisor adds a new habit. Schedule a review of your break list every few months, and make sure it matches what actually happens on the floor.
Illustrative example: check a break deduction
Suppose a New York hire takes a permitted 10-minute break, but the timeclock deducts 10 minutes as unpaid. Compare the time entry with the break list, correct the entry to include those minutes as work time, and check the setting that caused the deduction. Then explain the correction to the hire and the shift lead.
Check 3: put your policies in writing and make sure every hire receives them
The third check ties the other two together. In New York, Labor Law section 195.5 requires employers to give notice of certain policies. The state's FAQ quotes it: "Section 195.5 of the Labor Law states: Every employer shall notify his employees in writing or by publicly posting the employer's policy on sick leave, vacation, personal leave, holidays and hours." The quoted text comes from the same Wages and Hours FAQ linked above.
Two points from that quote are worth emphasizing. First, whichever method you pick has to actually reach employees. A policy kept in a manager's binder may not count as publicly posted. Second, hours is on the list. As an onboarding practice, keep your schedule rules, shift-length rules, and any break practice tied to the workday in the same document, even though breaks are not named individually in the quoted sentence.
Practical steps:
- Build one onboarding packet for each state. Hires in Washington should not receive New York language, and the reverse. If you use a shared packet, mark which sections apply to which state.
- Include sick leave, vacation, personal leave, holidays, hours, and breaks. Some items are not named in the New York sentence, but a complete packet avoids gaps.
- Get a signed or dated acknowledgment from every hire, and store it in the personnel file rather than a manager's notebook.
- If you choose posting, put the policy where employees will see it at work, and keep a dated record of where it was posted.
- Update the packet when a policy changes, and tell current staff. A policy that changed without notice creates the same problem as a policy that was never written down.
Bringing the three checks into one onboarding flow
It helps to sequence these checks so nothing gets skipped. Here is one workable order.
Before the offer. Decide which state's rules apply to the role, based on where the employee will work, and write that down. If a role spans more than one state, or a hire may move between locations, get a clear answer from counsel or the relevant state agency before you make the offer. Set the wage using the current Washington figure if the hire will work in Washington. Confirm that the offer letter does not promise anything that conflicts with your written sick leave, break, or hours policies.
Day one. Review the packet with the new hire in plain words. Cover sick leave notice, breaks, the schedule, and who to contact when they need to be out. Get the signed acknowledgment. Answer questions in writing wherever the answer matters.
First week. Check timekeeping for the first few shifts. Confirm that permitted breaks are recorded the way your written policy says. Check that any sick leave request was logged with the date it was made and the date of the shift.
Ongoing. Review the packet and the state pages at least once a year, and whenever a policy changes. Washington's wage rate follows the January 1 schedule set by statute, so put a reminder on your calendar for early January.
Talking to new hires about these rules
Written policies support the conversation, but the explanation on day one helps people follow them. Keep the explanation short and concrete. A new hire does not need a lecture on statutes. They need to know what to do when something goes wrong.
For sick leave in Washington, you might say something like: "If you're ill, tell your scheduler as soon as you know. Our written policy says how much notice we require for planned absences, and it covers what to do when you get sick without warning." For breaks in New York, you might say: "These are the breaks you can take. If you ever see a short break deducted, tell me."
Two habits make these conversations work. First, ask the new hire to repeat the rule back in their own words. That catches confusion early. Second, tell them where the written copy lives and how to ask a question later. A hire who knows they can ask without getting in trouble is far more likely to raise a problem before it becomes a dispute.
Mistakes to avoid
Several errors come up again and again when hourly staff are onboarded across state lines. Watch for these:
- Relying on verbal policy. A rule that exists only in a manager's head cannot be applied consistently, and it is hard to defend later. If it matters, write it down.
- Copying a packet from one state to the other. Language written for Washington sick leave does not automatically fit New York, and the reverse is also true. Keep the two packets separate.
- Letting timeclock defaults decide pay. Check whether your software deducts breaks automatically. The default is a setting you chose, not a legal answer, so check it against your policy.
- Using old wage figures. The Washington minimum wage changes on a statutory schedule. A figure you saw in an old offer letter or a job board post may no longer apply.
- Disciplining people for a rule you never gave them. If the written policy does not require advance notice, or the notice period is different from what a supervisor remembers, do not treat an absence as a violation. Fix the policy or fix the conversation first.
- Assuming one checklist covers everything. These three checks are a starting point. Other rules may apply to hours, pay, leave, and records, and each has its own official source.
Before the first shift
Three checks will not solve every onboarding problem, but they cover sick leave notice, break pay, and policy notices relevant to these hires. Today, compare your next hire's packet with the sick leave notice policy and timeclock settings, and correct any mismatch before their first shift.
Related guides: I-9 name mismatch: 4 steps for a new hire's document · New hire benefits: 5 IRS rules and examples · New hire pay: 5 checks before the first paycheck.
Common questions
Can we require ten days' notice for sick leave in Washington? Yes, subject to the regulation's allowance for notice as early as practicable and its written-policy or collective-bargaining-agreement requirements. Notify employees of that policy or agreement before requiring notice. Read the full WAC 296-128-650 before applying a notice requirement to an absence.
Are short breaks paid in New York? Yes, the state's guidance says permitted breaks of up to 20 minutes should be paid as work time. Check the time entry if a hire reports a deduction, and review longer breaks separately.
Do we have to post policies or give them to each person in New York? Section 195.5 allows written notification or public posting. Choose the method employees can access, and use the policy topics listed in Check 3 when reviewing your packet.
Does this post cover everything we need to know? No, it covers three onboarding checks. Use the linked pages as your starting point, and talk to counsel about your specific situation.