Skip forward into hiring notes
RosterAcorn

Pennsylvania pay records: 5 items for each employee

Pennsylvania pay records must include employee names, straight time wages, overtime excess compensation, additions or deductions, and payment dates with the periods covered.

Key takeaways

  • Check each worker's file against the five items below.
  • Keep straight time wages and overtime excess compensation separate.
  • Match each payment to its pay period.
  • Test how quickly your team can retrieve a worker's record.

The pay record you keep shows what was earned, what was taken out, and when the money was paid. When a client asks about hours, a worker questions a paycheck, or a state official asks for records, that file is the first thing you will reach for.

The state's rules on what a pay record must contain are in 34 Pa. Code § 231.31, Contents of record. This post walks through five items from that list that belong on every worker's file. For each one, it explains what the rule describes, what it looks like in staffing work, and what to check before a payroll run. It closes with notes on retention and availability.

This is general information, not legal advice. Whether a rule applies to a particular employer, worker, or pay arrangement depends on facts this post does not cover. Check specific questions with your employment counsel or payroll advisor.

Why one complete record for each worker matters

Staffing teams often handle many people at once. A coordinator updates a timesheet early in the week, a branch manager changes a pay rate midweek, and a payroll vendor posts an adjustment at month end. When those changes are scattered across email threads, phone notes, and separate spreadsheets, answering a simple question about one worker takes a long search.

A single, complete record for each worker gives your team one place to look and one set of fields to fill in. It also gives an auditor or a new coordinator a file they can read without help from the person who built it. The five items below are a practical way to reach that standard.

If a worker moves between placements, decide whether each placement gets its own section of the file or its own file. Then apply that choice the same way every time.

1. The worker's full name and identifier

The rule says the record must show the employee's name in full. It also addresses numbers: if a number or other identifying symbol is used in place of the name on time, work, or payroll records, that symbol must appear on the same record. In plain terms, keep the full name and any symbol used in its place together on the record.

Confirm the exact wording in the section 231.31 text before you change your form.

Staffing work makes this harder than it sounds. A worker may appear under a nickname on a client's badge system, a legal name on a background check, and an old name in a previous payroll system. Choose one legal name for the record, spelled the way it appears on identification documents in the file, and use it on every form, including timesheets, placement paperwork, and pay statements.

If an internal ID is used, print it on the record next to the full name and use the same number on timesheets and payroll reports. If the number changes because the worker was re-entered in a new system, keep the old number in a dated note on the file so older timesheets can be connected to the current record.

When a worker changes their legal name, update the record and add a dated note. Do not erase the old name, because older timesheets and pay statements still carry it.

2. Total straight time wages for the workweek

The second item is the total of straight time wages for the workweek. The rule describes this as the total daily or weekly straight time wages, meaning the total wages due for hours worked during the workweek. It states that this total includes all wages due during any overtime worked, but excludes overtime excess compensation. The text of 34 Pa. Code § 231.31 is short, so read it in full at least once.

For each workweek, note the hours worked, the rate that applies, and the resulting straight time total. Some teams keep daily lines and roll them up at the end of the week. Others enter a weekly total linked to the timesheet. Either approach works if a reviewer can trace the total back to the hours.

A common trap is the gap between bill rate and pay rate. The client is charged one amount for a worker's hours, and the worker is paid another. The wage total must reflect what the worker was due. Keep bill rates and markups in a separate billing record.

A worker who holds two assignments in the same workweek, or moves between two placements midweek, needs hours from both in one weekly total. A record showing only the second placement's hours is incomplete.

Finally, define the workweek once and apply it to every worker. If one coordinator counts a week from one day and another counts from a different day, the totals will not match. Write the definition into your payroll procedures and into the file, so anyone reading it can see the choice.

A short checklist for this item:

  • Hours worked for each day or week, with the rate used.
  • A straight time total for the workweek that includes hours worked as overtime.
  • Hours from every placement in the same week combined.
  • Bill rates kept in a separate record.

3. Overtime excess compensation for the workweek

The third item is the total overtime excess compensation for the workweek. The rule describes it as the excess compensation for overtime worked, over and above all straight time earnings or wages also earned during the overtime hours. In everyday terms, it is the extra amount paid for overtime on top of the straight time counted in item two.

Write your calculation method down and confirm it with your payroll provider. For related preparation, review state overtime rules before the offer.

The file should show the inputs: which hours were overtime, what rate or premium applied, and the resulting excess. A reviewer should be able to recalculate the number from the record alone. If they cannot, the record needs more detail.

Avoid lumping overtime into a single gross figure. A gross total does not show whether overtime was worked, how many hours it covered, or how the excess was calculated. Separate lines make the record useful when a question comes up months later.

Overtime that spans two pay periods or two placements needs care. Show which workweek the overtime belongs to and when it was paid, using the same workweek definition as item two so the figures line up.

Corrections need the same discipline. When a timesheet changes after payroll has run, record the correction in the period it is paid, with a note referring to the original workweek. This keeps earlier totals from being silently rewritten.

A short checklist for this item:

  • Overtime hours identified for each workweek.
  • Excess compensation shown on its own line.
  • A written method, used the same way for every worker.
  • Corrections noted with a reference to the original week.

4. Additions to and deductions from wages each pay period

The fourth item is the total of additions to or deductions from wages paid each pay period. The rule is about totals. For each pay period, show what was added and what was taken away. If one of them is zero, enter the zero, so a reviewer can see that nothing was left out.

Because the rule is written by pay period, organize the record the same way. A running balance across many periods is harder to check than a clean block for each one.

Show gross, additions, deductions, and net pay together, so the path from one to the other is visible on the page. A record that shows only net pay leaves out the information the rule asks for.

Staffing firms often carry more deductions than they expect. Some relate to taxes or benefits, some to equipment or uniforms, and some to other charges. Ask your employment counsel to assess whether a proposed deduction is permitted under applicable law. This section is about recording deductions accurately, not deciding whether they are permitted. Have your employment counsel confirm an arrangement before you add a new type of deduction to your system.

For each deduction, keep the amount, the pay period it applied to, the reason, and the document that describes it. If a deduction is reversed or refunded, record the reversal in the period when it happened. Do not net it silently against an earlier figure, because that makes the earlier period look different from what the worker was actually paid.

Reconcile the record against the pay statement every period. Mismatches are much easier to catch in the period they occur than months later, when the people involved have moved on to other placements.

A short checklist for this item:

  • An additions total for each pay period.
  • A deductions total for each pay period, with the reason and supporting document on file.
  • Gross, additions, deductions, and net shown together.
  • Reversals and refunds recorded in the period they occurred.

Illustrative example: totaling additions

Show the additions total alongside gross pay, deductions, and net pay, and keep a note explaining each addition.

5. The pay date and the pay period it covers

The fifth item is the date of payment and the pay period covered by that payment. The rule lists both together. Without both, a payment could be for last week, the week before, or a mix of the two, and no reader can tell which hours it paid for.

Record the start and end dates of the pay period and the date the payment was made. If the actual payment date differs from the scheduled pay date, record the actual date. The pay period on the record should match the period shown on the pay statement, so the worker and the reviewer see the same time frame.

Staffing schedules overlap. A client's timesheet approval may arrive late, so a payment covers a period that closed before some hours were approved. A short note explaining the gap is far better than an unexplained payment that looks wrong later.

Give off-cycle payments, such as a correction paid separately from the regular run, their own entry with their own payment date and period. Folding them into a regular period without a note changes the apparent totals and makes the record harder to reconcile.

For scheduling questions, see first payday rules for state payment schedules.

A short checklist for this item:

  • Pay period start and end dates.
  • The actual payment date.
  • A matching period on the pay statement.
  • Separate entries and notes for off-cycle payments.

How long to keep the records and where they must be available

Keeping the five items right is only part of the job. The same section of the code also sets a retention period and says where records must be available when they are kept somewhere other than the place of employment.

On retention, the rule in 34 Pa. Code § 231.31 says records shall be maintained for a period of 3 years from the date of last entry. Build a retention field into your system so no one has to calculate the date by hand.

On availability, the same section says that where records are maintained at a central recordkeeping office rather than at the place of employment, they must be made available for inspection at the place of employment within 7 calendar days after verbal or written notice from the state secretary or an authorized representative. For a firm with a central office and many job sites, this is the rule to plan for.

Confirm with counsel which site counts as the place of employment for each placement. A worker placed at a client's facility may have a different place of employment than the agency's office, and that answer determines where the inspection requirement applies.

Do not wait for a notice to find out how long it takes to pull a file. Test the process. Pick a worker and a site, and time how long it takes to produce that worker's full record for that placement. Note every step that depends on one person, and fix them with a file index, clear folder names, and a named backup for each office.

A monthly review checklist

Once a month, before the payroll cut-off, sample a set of workers and check their files against the five items:

  • The full legal name and any ID used in place of the name appear on the same record.
  • Straight time totals are shown for each workweek, with hours from every placement included.
  • Overtime excess compensation is on its own line, with a written method behind it.
  • Additions and deductions are totaled for each pay period and match the pay statement.
  • Each pay period has start, end, and actual payment dates, with off-cycle payments flagged.
  • Retention dates are recorded, and file production has been tested recently.

Rotate the sample so every coordinator's files are reviewed over time. A small, regular check finds problems while they are still easy to fix.

Start with a file today

Choose a worker's latest pay record today and compare it with the monthly checklist. Note any missing information and assign someone to correct it before the next payroll run.

Related guides: Check pay equity before approving an offer: 5 checks · Criminal record requests: 5 steps to choose a source · Daylight saving day pay: 6 timesheet review steps.

Pay record questions

What should I do when a total cannot be traced?

Check the underlying timesheet, hours, and rate before accepting the total. A reviewer should be able to follow the calculation without calling the person who entered it.

How should I handle a payment outside the regular run?

Give the payment its own entry, date, and covered period. Add a note connecting it to the original workweek when it corrects earlier pay.

Sources