Skip forward into hiring notes
RosterAcorn

WOTC hire-date limits: 2 windows and the SNAP test

Why the hire date comes first

WOTC hire-date limits include one-year and two-year windows; the SNAP test counts benefit months in a five-month period ending on the hiring date. The Form 8850 instructions describe several groups with tests tied to dates. The applicant must be hired within a set period after an event, such as discharge from the military, a felony conviction, or the end of benefits. If the hire falls outside that period, the applicant does not fit that group, no matter how well they fit the job.

That makes the hire date a screening question, not an afterthought. Checking the dates before the offer tells you where you stand before you commit to a salary, and it lets you give the applicant a clear answer about eligibility.

This post walks through the hire-date limits described in the official instructions for IRS Form 8850. We cover the one-year limits, the two-year limit, the SNAP benefit-history test, and the long-term unemployment category. Each rule links to its source so you can read the wording yourself.

One caveat before we start. These instructions set out conditions tied to dates and events. They do not tell you how to run your hiring process, and they do not decide eligibility for any one person. The rest of this post sticks to what the rules say and shows you how to apply them to the dates in front of you.

The one-year windows

Two groups in the instructions have a one-year limit.

The first is the disabled veteran. The instructions describe a veteran who is "Entitled to compensation for a service-connected disability and is hired not more than 1 year after being discharged or released from active duty in the U.S." ( IRS Form 8850 instructions). Two parts of this test must both be true.

A veteran with a health condition is not automatically in this group. The disability has to carry compensation for a service connection. The clock also starts at discharge or release, not at the date the veteran applied or the date you first spoke. Ask for the discharge or release date early, because it sets the deadline for the whole hire.

Here is how the count works. Suppose a veteran was discharged on a fixed date. A hire made within one year after that date falls inside the limit. A hire made after the one-year anniversary falls outside it. The veteran and the discharge date stay the same in both cases. Only the start date changes, and that alone changes the answer.

The second group with a one-year limit is the ex-felon. The instructions describe "An ex-felon who has been convicted of a felony under any federal or state statute, and is hired not more than 1 year after the conviction or release from prison for that felony" ( IRS Form 8850 instructions).

Three details matter. The felony has to fall under a federal or state statute. The one-year period runs from the conviction or from release from prison for that felony. And the period is tied to that particular felony, so an unrelated event in the applicant's background does not start a new clock.

Recruiters should handle this part with care. Check the rules where you operate before you ask, then request only the dates the rule needs. For related reading, see criminal record requests.

The two-year window for former TANF recipients

The two-year limit applies to a person who "Stopped being eligible for TANF payments because federal or state law limits the maximum period such assistance is payable and the individual is hired not more than 2 years after such eligibility ended" ( IRS Form 8850 instructions).

The instructions link this group to a legal limit on how long assistance can be paid, and that cause is part of the test. A person whose eligibility ended for some other reason does not fit this exact wording.

The clock runs from the date eligibility ended. That is the date the rule names, so it is the date to collect. An applicant may remember the date of their last payment, but the rule is written around the end of eligibility. Ask for that date on any paperwork they have, and note where it came from.

Because the window is two years, this group often gives more room than the one-year groups. Do not assume that. Count from the end of eligibility to your planned hire date, using the actual dates in front of you.

Suppose eligibility ended on a fixed date. A hire on or before the second anniversary of that date falls within the limit. A hire after that date does not. The count is simple, but it goes wrong when the end-of-eligibility date comes from the wrong document, so confirm the date before you rely on it.

The three-month test: SNAP

The SNAP test concerns benefit history rather than a deadline after a qualifying event. The instructions do not set a three-month window for when a hire must happen. The three months belong to the SNAP category, which tests benefits received over a five-month period.

The SNAP group covers a person who "Is no longer eligible for such assistance under section 6(o) of the Food and Nutrition Act of 2008, but the family received SNAP benefits for at least 3 months of the 5-month period ending on the hiring date" ( IRS Form 8850 instructions).

Read that carefully, because it has two conditions:

  1. The applicant is no longer eligible for that assistance under the section the quote names.
  2. The family received SNAP benefits for at least three months of the five months that end on the hiring date.

The five-month period is anchored to the hire date. Count back five months from the day the person starts, then check whether at least three of those months included benefits. The rule speaks of the family, so the test looks at the family's benefits, not only the applicant's own.

Suppose your planned hire date falls in late summer. The look-back starts five months earlier, and the period runs from that earlier date to the hire date. If the family received benefits in at least three of those five months, the second condition is met. If the start date moves later, the look-back moves with it, so the count has to be done again from the new date.

Long-term unemployment recipients

The instructions point to a separate form for this group. They say ETA Form 9175, the Long-Term Unemployment Recipient Self-Attestation Form, is needed "if the job applicant is a qualified long-term unemployment recipient" ( IRS Form 8850 instructions). Because the form is a self-attestation, the applicant supplies the unemployment facts in writing. You do not have to reconstruct them from a resume or a conversation.

The category includes a period of unemployment compensation. The instructions say it "Includes a period (which may be less than 27 consecutive weeks) in which the individual received unemployment compensation under state or federal law" ( IRS Form 8850 instructions).

The parenthesis is easy to misread. It describes the period of unemployment compensation, rather than establishing the length of the entire unemployment period. Do not use that parenthesis alone to decide whether an applicant qualifies. Read the form and the period together.

If you are unsure whether an applicant's unemployment period counts, do not guess. Ask for the completed form, read the instructions again, and if the answer is still unclear, put the question to a tax professional before you make the offer. Outside advice can help resolve a question you cannot answer from the instructions.

Read the full instructions for the current form year before you rely on any deadline for this group.

Talking to applicants about dates

Explain briefly that the tax credit uses dates, and that you will ask for specific dates only for the groups the rules describe. Say what you need, why you need it, and how you will keep it.

Keep the questions narrow. An applicant who is asked for a discharge date, a benefit history, or a conviction date should know exactly which rule that date serves. A vague request for "your history" invites answers you do not need and makes the process harder to defend.

Give applicants room to answer. Some will not have a document with them. Some will not know the exact date. Write down what they tell you, mark it as their own account, and say what you will need to confirm it. If an applicant declines to share a date, note that decision too. Without the date, you may not be able to tell whether a window applies, and that should be explained to the applicant in plain terms.

Be even-handed in tone. Use consistent wording when asking applicants about the same qualifying event.

Build a simple process before the offer

A small firm does not need a complicated system. It needs a consistent one. Keep this screening separate from other federal checks. E-Verify, for example, is a different system, and it describes its purpose as helping employers work with the "Department of Homeland Security and the Social Security Administration to confirm employment eligibility" ( E-Verify). A result there does not settle a WOTC window, and a WOTC answer does not settle anything there.

A workable WOTC process has five steps.

1. Fix the planned start date first. Every window in this post runs to the hire date, so the start date is the anchor for all the math. Settle it before you count anything, and write it down.

2. Ask for dates, not just yes or no. A yes or no answer does not tell you whether a window is open. Ask for the discharge or release date, the conviction or release date, the date eligibility ended, or the months of benefits, depending on the group the applicant says applies.

3. Count from the planned hire date. For the one-year and two-year groups, count forward from the trigger date to the hire date. For the SNAP test, count back five months from the hire date and check the benefit months. Use a calendar, not memory.

4. Check the source of each date. Know where each date came from before you use it. If the applicant gave you a form or document, look at it yourself rather than relying on the applicant's summary.

5. Count again when anything changes. If the start date moves, the window may close or open. Run the count again before you make a new offer.

Keep the process consistent for every applicant. Ask the same questions, use the same dates, and make the same counts. Fair, repeatable screening is easier to defend than a one-off judgment.

Common mistakes to avoid

A few errors show up again and again in small-firm screening. The table below lists them with the fix for each.

MistakeWhat to do instead
Mixing up the groupsApply only the clock for the group the applicant actually claims.
Counting from the offer date Fix the hire date and count from there, since the SNAP look-back ends on it.
Treating the three months as a hire window The three months are benefit months inside a five-month look-back, not a deadline.
Assuming a fixed unemployment-compensation period Read the applicant's form and distinguish compensation from the full unemployment period.
Asking too muchRequest only what the rule needs.
Relying on memoryGet dates in writing and compare them with the rule's wording.
Moving the start date without recounting Run every count again whenever the start date changes.

Keeping records that hold up

Your screening file should let someone else follow your reasoning. For each applicant screened for a group, keep the group name, the planned hire date, the trigger date and where it came from, and the result of the count. Add a line for any document you received and a short note on any date you could not confirm.

Store these with your other hiring files, and limit access to the people who need them. Follow the rules that apply to your business and your state. Keep the file factual, and avoid notes about an applicant's personal circumstances beyond what the rule requires.

Rehires need their own care. The U.S. Immigration and Customs Enforcement guidance on the Form I-9 says to "Provide the date of rehire in Supplement B, or in an alternate applicable section or supplement pertaining to a required reverification or rehire entry, of the Form I-9" ( U.S. Immigration and Customs Enforcement). In practice, record the rehire date in the applicable Form I-9 entry. If someone returns after a gap, check that entry rather than assuming the original date is sufficient. For related recordkeeping, see the Form I-9 rehire or acquisition log.

When an applicant's situation is unusual, write down the question you could not answer and who you consulted. A short, dated note of that kind is far more useful later than a memory of a phone call.

Quick reference

The table below summarizes the rules covered in this post. Read the full instructions before you rely on any row.

GroupLimitMeasured from
Disabled veteran with service-connected compensationNot more than 1 yearDischarge or release
Ex-felonNot more than 1 year Conviction or release from prison for that felony
Former TANF recipientNot more than 2 yearsEnd of eligibility for TANF payments
Family receiving SNAPAt least 3 months within a 5-month periodEnding on the hiring date

Closing thoughts

Hire-date limits are simple to state and easy to get wrong in practice. The main discipline is to fix the start date, collect the right dates, and count carefully before you make an offer.

Start with the groups your firm is most likely to see, read the full instructions for each one, and build a short checklist from the steps above. A little structure at the screening stage saves time later and keeps the decision clear for everyone involved.

Related guides: Check 4 state limits before you answer a reference call · Disabled access credit limits in 3 steps · Driving report age limits: 3 questions to separate.

Sources