Washington job postings must include a pay range or fixed wage and a general description of all benefits and other compensation.
Key takeaways
- Confirm the approved pay figures before drafting.
- Check benefits and other compensation against the offer.
- Review short posts and third-party listings before publication.
- Assign someone to handle written notices and corrections.
This post explains those two disclosures in plain words. It also covers what counts as a posting, how internal transfers and promotions work, what to do when a posting has an error, and how complaints are handled. It is written for recruiters and small staffing teams. It is general information, not legal advice. For a firm answer on a specific opening, read the statute and ask your employer's counsel.
The two disclosures in plain words
The core rule is in RCW 49.58.110. It says the employer must disclose two things in each posting for each job opening:
- The wage scale or salary range. If the employer is offering only a fixed wage amount for the opening, the employer must disclose that fixed amount rather than a scale or range.
- A general description of all of the benefits and other compensation to be offered to the hired applicant.
Both belong in the posting itself, not only in a later offer letter.
Treat every requisition as its own posting, and check each one against both disclosures before it goes live.
Disclosure one: the pay range
Start with the number your client has approved. A range that is provisional, or one that no one on the hiring team has signed off on, will cause problems later even if it looks tidy in the ad. Write the range the employer is actually prepared to pay for this opening.
Use a range, not a vague phrase. A phrase such as "competitive pay" or "DOE" does not by itself give the scale or range the statute asks for, so do not use those words in place of the figures.
Match the unit to the job. If the role is paid hourly, show an hourly range. If it is salaried, show an annual range. Use the same unit everywhere the posting appears, including the short version you paste into a job board's summary field. Mismatched units across channels are easy to miss and easy for an applicant to notice.
For a fixed-wage opening, write the single figure, and do not invent a range around it to look more flexible.
Keep the figure current. If the range changes after the posting goes live, the posting has to change too. Build a step into your process that compares the live ad with the approved offer terms whenever the client updates the budget or the role is reopened.
Disclosure two: benefits and other compensation
"All" means the list should not stop at the health plan. "To be offered to the hired applicant" means you describe what this person would receive, not a generic package the company sometimes provides to other staff.
The text asks for a general description. It does not ask for a dollar value next to each item. A line that names the main items, such as medical, dental, and vision coverage, paid time off, and a retirement plan with employer contributions, gives an applicant a clear picture without a page of fine print. Include only the items that are actually part of the offer.
Use the offer letter as your checklist. If an item is part of the offer, it belongs in the description. If the offer depends on something, say so, such as a bonus that is paid after a probation period.
Be careful with "other compensation." This phrase is broader than benefits. Commission plans, sign-on payments, relocation help, and recurring bonuses are all forms of pay that could reach the applicant. A posting that describes a base salary and nothing else can leave out the part of the offer applicants care about most.
Keep it accurate across channels. The same benefits description should appear wherever the job is posted, including on a staffing firm's listing and on the client's career page.
What counts as a posting
The statute defines the word broadly. Under RCW 49.58.110, "posting" means any solicitation intended to recruit job applicants for a specific available position, including recruitment done directly by an employer or indirectly through a third party, and includes any postings done electronically, or with a printed hard copy, that includes qualifications for desired applicants.
Read that definition in pieces. First, the solicitation has to be intended to recruit for a specific available position. Second, it has to include qualifications for desired applicants. Third, the channel does not matter. An online listing, a printed flyer, and a social media post can all qualify.
For a staffing team, that means a listing you publish for a client counts, even if the client's name is on the job and your firm handles the applications. Do not assume that a listing falls outside the rule because someone else placed it.
Short posts are not exempt by default. A quick social post that names a specific opening and lists what the employer wants from applicants fits the definition. Include both disclosures in it, or confirm with your employer's counsel how a short version should handle them.
Do not confuse a general ad with a specific one. The definition is tied to a specific available position. A general "join our talent pool" note with no role and no qualifications is not the kind of solicitation the definition describes. A posting for a named role with a list of qualifications is.
Internal transfers and promotions
The statute says that, upon request of an employee offered an internal transfer to a new position or promotion, the employer must provide the wage scale or salary range for the employee's new position. Where the employer is offering only a fixed wage amount for the new position or promotion, the employer must disclose that fixed amount instead. See RCW 49.58.110.
For a recruiter, that means you should have the range ready before the offer goes out, so you are not scrambling when an employee asks what the new job pays.
Build a short internal process. Keep the approved range in the requisition file. Name who answers employee questions about transfers and promotions. Make sure the person who sends an internal offer knows what to say when asked for the range. Small teams often skip this step because internal moves feel informal, but the statute does not treat them that way.
When a posting has an error
Errors happen. The statute includes a correction path, and it is worth understanding before you need it.
The correction rule is conditional. The statute says that if the employer corrects the posting within five business days of receiving the written notice and, where applicable, contacts any applicable third-party posting entity with a demand to correct the posting, then neither the department nor the court may assess or award penalties, damages, or other relief under this section for the violation. See RCW 49.58.110.
The count is in business days, not calendar days. Where a third-party listing is involved, correcting your own page alone does not satisfy the demand requirement.
So set up a simple intake. Make sure written notices about postings reach someone who can act the same day. Log the date the notice arrived, when the posting was corrected, and when any third-party platform received its demand. That record helps if a question comes up later.
A correction after notice is not a substitute for posting correctly the first time. The rule speaks to a specific sequence of notice and correction, and the best outcome is a posting that never needed fixing.
How complaints are handled
The statute gives applicants and employees a way to raise problems. Under RCW 49.58.110, the director shall investigate if a job applicant or employee files a complaint with the department alleging a violation of this section.
The chapter adds more detail. According to Chapter 49.58 RCW, the director must investigate complaints regarding compliance with this section and any related rules adopted under this chapter. The director, upon complaint, may also initiate an investigation on behalf of one or more employees for a violation of RCW 49.58.020, 49.58.040, and 49.58.050, and the rules adopted under this chapter.
Decisions can be appealed. The same chapter says an appeal from the director's determination may be taken in accordance with chapter 34.05 RCW.
Civil penalties have a designated destination. The same chapter says the department must deposit civil penalties paid under this section in the supplemental pension fund established under RCW 51.44.033. This does not change how a posting should be written, but it is part of the enforcement picture.
A posting that looks routine to your team may look different to an applicant who compares it with what was said in an interview. Read each posting as a stranger would, and ask whether the pay and benefits are clear without a follow-up question.
Common mistakes to avoid
Most problems with these two disclosures come from habit rather than intent. A few patterns show up again and again.
Writing the benefits line last, in a hurry, is one. By the time the pay range is settled, the team is tired, and the benefits line gets copied from an older ad or left vague. Make benefits a required field in your own process, with the same level of attention as the title.
If the hiring manager wants to avoid stating numbers, the conversation to have is with the manager, not a wording change in the ad.
Copying an old posting is another. Start from the approved offer for the current opening, not from the last ad that looked similar.
Writing benefits for the company instead of the applicant is easy to do. A paragraph about the company's culture, its wellness programs, and its awards may be accurate, but the statute asks about what the hired applicant would be offered. Keep the company story if you like, but make sure the offer details are there too.
Forgetting internal postings is another risk. Small teams often treat internal moves as outside the process, and that is where a gap can open.
Setting an oversized range is also worth a second look. A range so wide that it says little does not give an applicant much to act on. Use the range the employer has approved, and if that range is genuinely broad, explain what drives the placement within it.
Working with clients
Most of the information you need for a posting belongs to the client, not to you. The pay range, the benefit list, and any bonus or commission structure usually come from the client's HR team or hiring manager. Ask for those details before you draft the ad, and do not fill a gap with a guess.
Put the disclosure step in your intake form. Ask the client to confirm the pay range or fixed amount, the unit it is stated in, the benefits and other compensation for the role, and whether any of those items depend on conditions. A short form that the client signs off on protects both sides when the posting goes live. For the wider ad review, use the recruiter job ad checks.
Agree on who owns corrections. If a client's HR team is the one who knows that a benefit has changed, they should know that they are expected to tell you quickly. Make it clear who receives written notices about postings, who responds, and who contacts any job board or third-party platform that carries the ad. A correction that depends on a single person who is on leave is a weak plan.
Be honest when a client asks you to leave out a pay figure or benefit. You can explain the rule, point to the statute, and suggest that the client confirm the position with its own counsel. You should not agree to publish a posting that you know does not meet the disclosures.
Review renewals as new postings. A renewal often feels like a formality, but the range and benefits may have changed since the ad first ran. Treat every renewal as a fresh check of both disclosures, with the approved offer in front of you. Keep the approval with your hiring files, using the recruiting records audit for a broader review.
A checklist before you post
Use this list each time a Washington posting goes live or is renewed.
- Confirm the approved pay range, or the single fixed amount, with the hiring manager or client.
- Write the range in the unit the job uses, and use the same figure everywhere the posting appears.
- List every benefit and form of other compensation in the offer, in general terms.
- Check that the posting names a specific position and includes qualifications, so it fits the definition.
- Apply the same disclosures to third-party listings and social posts.
- Confirm that an employee offered an internal transfer or promotion can get the range on request, and name the person who will provide it.
- Name an owner for written notices about postings, and track the five-business-day window.
- Keep a record of corrections and of any demands sent to third-party posting entities.
- Review renewals as new postings, since the range and benefits may have changed.
Illustrative example: checking a fixed-wage offer
Compare the job board copy with the approved offer before posting it. This example shows the editing process; it is not a suggested wage or benefits package.
Two disclosures, one habit
Today, choose a Washington posting and check the pay and the benefits against the approved offer, not against last year's ad. The statute is short, and most of the work is in keeping the posting in step with the offer.
Common questions
What should I check in a short job board summary?
Check that it carries both disclosures and uses the same pay units as the full posting.
What should I keep after correcting a posting?
Keep the notice date, correction date, and a record of any applicable demand sent to a third-party posting entity.
What should I prepare for an internal offer?
Keep the approved range or fixed wage available for the employee's request.