Minnesota employers must pay wages at least every 31 days and earned commissions at least every three months on a payday designated in advance.
Key takeaways
- Record the designated payday before a hire starts.
- Map first-half wages to the first regular payday after work begins.
- Keep work dates separate from approval dates.
- Log the service date of any commission demand.
This post walks through what that section says, what it leaves open, and how a small staffing team can use it when picking dates. It is written for planning. It does not replace reading the statute itself or talking with an employment lawyer when your situation is unusual.
How often does a Minnesota employer have to pay wages?
The rule covers salary, earnings, and gratuities earned by an employee, and it treats the 31-day figure as the outer edge of the payment cycle. You can read the rule in Minnesota Statutes section 181.101.
The 31-day figure describes a longest gap, not a target. A schedule that pays every two weeks, or on the first and fifteenth of each month, leaves more room than the limit requires. Many small teams choose a biweekly or semimonthly rhythm because it is easy to remember and easy to line up with timesheet cycles. Those are planning choices, though. The statute does not require any particular cycle inside the window.
A useful habit is to count the gap from the end of the work period to the payday, not just the gap between paydays. A team can have a regular payday every two weeks and still run into trouble if the work period closes late and the paycheck ends up waiting longer than planned. Build your calendar so that the last day worked, the timesheet cutoff, the approval step, and the payday all fit comfortably inside the window.
How often do commissions have to be paid?
The two clocks run separately. A single payroll run may therefore cover wages but not commissions, so the team needs to track both on its calendar rather than assuming one payroll run settles everything.
Commission pay is harder to schedule than hourly or salary pay because it often depends on a sale closing, a client invoice being paid, or a target being reached. Those events land at unpredictable times. The statute speaks to commissions the employee has earned, so a small team needs a plain internal rule for when a commission counts as earned, and then it has to apply that rule to every sales hire in the same way. Confirm when commissions are earned before recording that rule alongside the pay calendar.
If a commission is earned early in a quarter and held until the end of the next one, the team may have passed the limit without noticing. Put commission dates on the calendar the moment a rule says a commission is earned, and check them every pay period.
Can an employee ask to be paid less often?
No. The statute says the regular payday applies "regardless of whether the employee requests payment at longer intervals."
This comes up more than people expect. A hire may ask to combine several pay periods into one check, to receive a larger lump sum later, or to simplify personal budgeting. Those requests are understandable, but the employer's obligation stays the same. Keep the answer consistent for every hire, and put it in a short written reply so no one can say they were treated differently.
What does a designated regular payday mean?
The employer picks the regular payday and must designate it in advance. The statute calls this a "regular payday designated in advance by the employer," so choose the date before the first hire starts rather than after the first pay period closes.
In practice, that means choosing a weekday, deciding how the payday relates to the close of each pay period, and confirming that your payroll provider or bank can process payments on that date. Write the schedule down and share it with each hire during onboarding, in whatever document you use to explain pay. If you expect a holiday to fall on a payday, decide how you will handle it now, while the calendar is still empty, rather than in the middle of a pay run when someone is waiting for a check.
Any schedule change must preserve the payment intervals and a regular payday designated in advance. A schedule that moves every few months is harder to audit than one that stays the same, and it is harder for a new hire to trust. If a change is needed, write down the reason, the old date, the new date, and the date the change takes effect, so the record shows the clocks stayed intact through the switch.
When is a new hire's first paycheck due?
Unless paid earlier, wages earned during the first half of the first 31-day pay period are due on the first regular payday following the first day of work. The rule is in the section.
For planning, map a new hire's first-half wages to that payday. If that payday comes soon after the start date, the deadline is short. Map this out before the hire starts, so the first check is not a surprise to anyone. For placements elsewhere, compare first payday schedules.
Paying earlier is allowed, since the rule says "unless paid earlier." Many teams find it simpler to pay the first period on the first regular payday, or sooner, and avoid any question about timing. For the rest of the first period, read the full section before you set your schedule.
When are wages earned?
For purposes of this section, wages are earned on the day an employee works. The statute draws that line, and the table below shows how the three dates in a pay cycle differ.
| Record | Work date | Approval date | Payment date |
|---|---|---|---|
| Example | Illustrative: the day the shift was worked | Illustrative: the day the timesheet was approved | Illustrative: the designated payday |
Other states describe the idea in different words. The Oregon Bureau of Labor and Industries puts the general concept this way: “Wage and hour law defines “hours worked” or “work time” (meaning the time that must be paid) as the time an employee is employed by and required to give to the employer.” ( Oregon Bureau of Labor and Industries) That is Oregon's rule, not Minnesota's, so do not carry its wording over as Minnesota law. The question it raises is still useful for any shift a Minnesota team schedules: was this time required by the employer?
This matters because the work date and the processing date are often different. A shift worked on a Tuesday counts as earned on that Tuesday, even if the timesheet is approved the following week or the client pays the staffing firm later. A team that tracks wages by the date they were paid, rather than the date they were worked, can end up with a payday that looks fine on paper but does not match when the wages were actually earned.
Keep daily time records by work date. That lets you tell which day each hour belongs to, which you need to apply the first-half rule for a new hire and to check that each payday falls inside the 31-day limit. Daily records also help when a dispute arises about a particular shift, because you can point to the day it was worked rather than reconstructing it from memory. Review time clock setup alongside those records.
Illustrative example: review work dates before approval
A team has 10 work dates to review. It records each work date, checks which wages belong to the first half of the new hire's first pay period, and matches those wages to the first regular payday after work begins. Timesheet approval stays in a separate column so processing does not replace the work date.
What happens if commissions are paid late after a demand?
If commissions are not paid within ten days of service of a demand, the commissioner may charge and collect the commissions earned along with a penalty. The penalty is equal to one-fifteenth of the commissions earned but unpaid for each day beyond the ten-day limit. The rule is in the section.
Read that carefully. The ten days run from service of the demand, not from the date an employee first mentions a missing commission in conversation. The penalty is calculated per day past the limit, and it is added to the commissions themselves. It does not replace them.
A simple habit helps. Keep a log of every commission demand you receive, with the date it was served, the amount claimed, and the date you paid it. When a demand arrives, check the log and the ten-day clock the same day. If your team has a pattern of late commission payments, fix it on the calendar now rather than in the middle of a dispute.
Do school districts follow the same schedule?
School entities have an exception for paying school-year wages on regular paydays under an applicable agreement or policy. It says the section does not prevent a school district, another public school entity, or a school as defined under section 120A.22 from paying wages earned during a school year on regular paydays. That payment can follow a contract, a collective bargaining agreement, or a personnel policy adopted by the governing board. The exception appears in the statute.
For a staffing team that places workers in school settings, the exception needs careful reading. It applies to the school entity paying its own employees under its own agreements. Whether it reaches workers your firm employs and places at a school depends on who the employer is on paper. Confirm that before you adopt a school's payday for your own workers, and get the school's agreement or policy in writing if you plan to rely on it. A verbal assurance from a site coordinator is not enough.
The exception concerns wages earned by the school's own employees during a school year. Do not assume that a placement at a school makes your firm's employees school employees. Plan other placements against the general rules.
Does the rule cover farm workers?
Yes. For purposes of this section, employee includes a person who performs agricultural labor as defined in section 181.85, subdivision 2. The definition itself is in section 181.85, subdivision 2, which section 181.101 cross-references, and it matters for staffing teams that place seasonal or field workers.
The comparison below gives illustrative planning checks for the main worker situations.
| Worker situation | Wage clock or planning check | Commission planning check |
|---|---|---|
| Illustrative: hourly or salaried employee | 31 days | Illustrative: check whether commissions are earned |
| Illustrative: commission-paid sales hire | 31 days | Illustrative: record when commissions are earned |
| Illustrative: agricultural worker | 31 days | Illustrative: check whether commissions are paid |
| Illustrative: worker paid by a school under its own agreement | Illustrative: check the school-year agreement or policy | Illustrative: review commission timing separately |
Seasonal work can make this harder. A short placement may start and end inside a single pay cycle, which means the first-half rule and the payday deadline can both apply in a very short window. Build a separate checklist for short placements so the first check and the final check are both set before the work begins.
How should a small staffing team set its pay calendar?
Start by writing down the regular payday for wages and commissions, designated in advance, with commissions scheduled at least once every three months. Then work through these steps for each new hire and each kind of placement.
- Name the regular payday in writing before the first hire starts.
- Map each new hire's first pay period, including the first-half rule and the first regular payday after the start date.
- Track work dates, since wages are earned on the day the employee works.
- Write a plain internal rule for when a commission counts as earned, and apply it to every sales hire.
- Log every commission demand with the date it was served and the date it was paid.
- Check school and agricultural placements against the exceptions and definitions described above.
- Review the calendar once a quarter and after any change to a payroll provider, bank, or client billing cycle.
Keep the calendar in one place that the whole team can see. Many payroll mistakes come from two people holding two different versions of the schedule. A single shared document, updated when something changes, removes most of that risk.
Today, open the shared calendar and map the next hire's start date, first-half wages, and first regular payday.
Where should I verify these rules before I finalize the schedule?
Read the current text of the statute before you finalize anything, since statutes can change and any summary can fall behind. Then ask an employment lawyer or the state labor agency to review your schedule, especially if you pay commissions, place workers in schools, or hire for agricultural work.
Set the dates once, write them down, and check them against the clock each time a new hire starts. A calendar that is clear to everyone on the team will do more to protect your payroll than any single rule. Treat this post as planning material, not legal or tax advice.