Skip forward into hiring notes
RosterAcorn

Form I-9 expiration: 2 groups that enter N/A

Form I-9 instructions give N/A to two groups: noncitizens whose work authorization does not expire and certain citizens of three Pacific nations.

Key takeaways

  • Check whether the worker fits either N/A group before choosing an entry.
  • Read the exact conditions for certain citizens of the Federated States of Micronesia, the Republic of the Marshall Islands, and Palau.
  • Track temporary proof separately from the worker's authorization end date.
  • Bring unclear cases to a supervisor or compliance contact before finalizing the entry.

Workers outside those groups whose permission to work has an end date need that date on the line.

Most new hires fill in the form without much thought about the expiration line. Then a worker reaches a line that asks for a date and has nothing obvious to write, or hands over temporary proof instead of a card, and the small staffing team doing the paperwork has to decide what goes down. A blank line, a guessed date, and an "N/A" entry each send a different signal to whoever reviews the file later.

This post is written for planning and training. It explains how to tell the two groups apart, how temporary proof changes the picture, and what to check in Section 1. Read the official pages before you apply any of it to a real hire.

What the expiration line asks for

The expiration line asks for the date when the worker's employment authorization ends. The instructions describe it as "an expiration date for the worker's employment authorization," and the Justice Department's Civil Rights Division, through its IER office, publishes guidance that explains how those instructions apply in practice. The date belongs to the worker's permission to work. It does not belong to your payroll calendar, a probation period, or the start date of the job.

That distinction catches people out. A recruiter may be tempted to write the end of a temporary contract or the date of a background check. Neither one is the worker's authorization, so neither one goes on that line.

Think of the line as a question about the worker, not the job. The job might end in six months, and the worker's authorization might run longer or shorter than that. Keep the two ideas apart in your notes too. A useful habit is to write down which source document gave you the date, or the reason for N/A. That note makes the decision easy to explain later.

Which two groups enter N/A

The instructions name two groups. The first is noncitizens who are authorized to work and whose employment authorization does not expire. The second is certain citizens of the three Pacific nations listed above. Keep these as two separate lines in your checklist.

The first group is defined by immigration status and the kind of work authorization a person holds. The second is defined by citizenship. Mixing them up leads to the wrong entry.

A quick way to separate them is to ask two questions. For the first group, ask whether the worker's permission to work has an end date. For the second, ask whether the worker fits the instructions' conditions for certain citizens of the three named nations. Two questions, two answers, one entry on the line.

Noncitizens whose authorization does not expire

The instructions offer two examples for this group: workers granted asylum and workers granted refugee status. They introduce the examples with "such as," which means the list illustrates the idea rather than covering every case. Read the full sentence in the current form instructions before you decide.

The idea behind the group is simple. The worker's permission to work does not run out on a set date, so there is no date to write. A document's expiration and the worker's employment authorization are separate matters; check the authorization before deciding the entry.

Separate guidance addresses which Form I-94 records are acceptable as temporary List A proof. The guidance includes this line: "An unexpired Form I-94 containing a class of admission of UHP or OAR." Read the class of admission printed on the record and compare it with the wording, rather than going by the name of the document. A second line covers a different class and adds a country requirement: an unexpired Form I-94 showing PAR and Afghanistan as the country of citizenship may temporarily show identity and work authorization as List A proof. For the Afghanistan PAR case, check the class of admission and country of citizenship together to assess acceptance as temporary List A proof.

Read the worker's documents, look at what they show about permission to work, and compare that with the instructions. If the picture is unclear, do not guess. Bring the file to a supervisor or compliance contact for a second review before you finalize the entry. A short note saying who reviewed it and why is far more useful later than anyone's memory of the conversation.

Never guess status from appearance, accent, name, or birthplace. A worker's national origin is not a reason to change how you handle their form. Workers can report an employer that does not follow E-Verify rules or that discriminates against them, and the E-Verify employee rights resource spells out that route. Put that point in your process notes next to the N/A entry, so the whole team treats each new hire the same way.

Citizens of the three Pacific nations

This group belongs on the second line of your checklist, not the first. The instructions name "certain citizens" of the three nations as workers who enter "N/A" on the expiration line. The word "certain" matters. The instructions do not say every citizen of those nations falls into this line, so do not assume that all of them do.

Because the group is defined by citizenship, check the exact conditions rather than relying on nationality alone. Read the exact wording for this group, compare it with the worker's documents and situation, and if the two do not line up, stop and ask for a review rather than picking the closest-looking option.

What changes when a new hire shows temporary proof

Temporary proof and an N/A entry are different things. Temporary proof does not, by itself, establish that a worker belongs to either N/A group. The official guidance gives the described temporary proof a validity period of 90 days from the date of hire or, for reverification, the date employment authorization expires. Your team has to track that period separately.

Illustrative example: tracking the document window

A new hire starts and shows temporary proof with a 90-day window from the date of hire. Mark the day that window ends in your tracker as soon as the form is complete. Waiting until the document runs out leaves the worker little time to find the next document, and it makes a rushed review more likely.

When that temporary proof expires, the worker must show either an unexpired Form I-766, Employment Authorization Document (EAD), or a combination of a List B document and a List C unrestricted Social Security card. Write that requirement into your process notes so every recruiter knows what the next document has to be.

A practical habit is a reminder to the worker and to the person who runs the tracker, sent well before the temporary proof expires. The lead time is your team's choice. What matters is that the reminder exists, because the date is the one thing on the file that nobody else will watch for you.

What to do when valid temporary proof is refused

The official guidance tells workers to contact IER for assistance if an employer refuses valid temporary proof for I-9 purposes. That advice is written for workers, but a recruiter should know it too. A team that refuses valid temporary proof can end up in a dispute, and the path forward is spelled out.

Treat every temporary-document decision as something a worker could question later. If your company uses E-Verify, have a second person review each temporary-document decision before the team accepts or rejects it. A second look costs a few minutes and leaves a record that the decision followed the procedure, not one person's mood on a busy day.

If temporary proof looks valid and the team is still unsure, do not reject it on a hunch. Write down what you are unsure about and bring it to a supervisor or compliance contact. That path keeps the worker and the company working from the same written steps.

Reverification for asylum and refugee workers

Not every document is subject to reverification. The official text says that if someone granted asylum or refugee status chooses to show a driver's license and an unrestricted Social Security card for Section 2, those documents "are not subject to reverification under Form I-9 rules." That statement covers those two documents as described, not every document a worker might show.

The N/A entry and reverification are separate questions. A worker in the N/A group still needs a note in your file about which documents they showed. Keep that note simple: the document type, the group the worker falls in, and the day you reviewed the form.

If a document's status is unclear under this statement, do not assume it does or does not fall under it. Check the official wording and the current form instructions, then ask a second person to confirm your reading before you set or skip a reminder.

Checking the name and address fields

Many small teams review Section 1 at the desk before accepting the rest of the form. The USCIS guidance on Section 1 names two fields worth checking. The first asks for "Other legal last names used, including a maiden name, if applicable." The second asks for "Current address, including street name and number city, state and ZIP code." Read the form itself rather than a secondhand summary when you check for missing details.

The "if applicable" wording means the other last names field matters only for workers who have used another legal last name. Many workers will have nothing to enter there, and that is expected. Do not push a worker to invent an entry to fill the space.

The address field asks for more than a city. It wants the street name and number, the city, the state, and the ZIP code. If something is missing, ask the worker to complete it before you accept the section as finished, and note the change in your file. For a document-name question, use the related guide to handling a name mismatch.

Writing the N/A entry

Write "N/A" on the expiration line the way the instructions describe. Use the same spelling every time so anyone reading the file sees the same entry.

Keep the explanation in a separate file note. A record can use these headings:

RecordDocument reviewedReason for entryReview action
ExampleDocument typeInstructions checked Second review requested

Do not leave the line blank, write a dash, or write a guessed date. A long note on the line makes the form harder to read and can make a reviewer wonder whether the entry was really decided. Put the explanation in your separate file note.

A blank line usually means the team has not yet decided which group the worker belongs to. Pause, complete the group check described above, and then enter the answer the instructions require. A blank that stays on the form is harder to fix later than a short delay at the desk.

Three patterns that cause trouble

The first is writing N/A without checking whether the worker fits the instructions. Confirm the applicable group before entering it.

The second is copying a temporary document's date onto the expiration line as if it were the end of the worker's authorization. Temporary proof has its own validity period, and that is a different thing from the date the worker's authorization ends. If you are unsure, hold the entry for review and do not copy a date across.

The third is letting temporary proof expire without follow-up. A calendar entry and a named owner solve this. Without one, the team ends up with a gap in the file and a worker who may be stuck without the next document.

Another risk is a team that depends on one person's knowledge. That works until the person is out. Write the rules down, keep the cited pages next to the procedure, and make sure a second person can follow the steps alone.

Keeping files for a small team

Keep one written procedure and apply it to every new hire. It should say which two groups get N/A, what temporary proof requires, who reviews unclear cases, and where the official pages live. A two-page procedure gets used far more than a long binder nobody opens. Put the links from this post on the first page so the team can check sources quickly. Use the broader new-hire verification guide to place this field check within onboarding.

Set up a simple tracker. Each row should include the worker's name, date of hire, document type, the group if you used the N/A entry, and any date that needs a reminder. Limit the sensitive information the tracker holds to what the team needs, restrict who can see it, and keep it with your other onboarding records.

Record who reviewed each unclear case and on what day. A reviewer's name and a date take seconds to write, and they answer the question someone will ask months later: who looked at this, and when? Keep those notes in the same place as the tracker so they are easy to find during an internal check.

Train new recruiters with the procedure and the cited pages. Ask them to explain the two groups in their own words and to walk through one practice case with a supervisor. A short session built around a real checklist sticks better than a long lecture about the rules.

Review the procedure on a set schedule, because form instructions and government guidance change. Pick a review date, assign an owner, and record which pages you checked.

Your next step today

Open the current instructions and compare your written N/A procedure with the two groups described above. Assign someone to review any unclear wording and check that temporary-document reminders have an owner.

Where to check the current rules

Which pages should the team check?

Use the official pages as the source of truth. Rules and form instructions change, so check the current versions rather than a saved copy or an older summary.

Who can help with an unresolved question?

A qualified immigration attorney can review the facts of a specific hire. Check the official pages and talk to your compliance contact first; a general guide cannot resolve every individual situation.

Related guides: Check a green card or EAD on Form I-9 in 3 steps · Form I-9 errors after hire: 3 correction methods · Form I-9 rehire or acquisition log: 8 suggested fields.

Sources