Ohio's sealing statute counts convictions connected with the same act, or resulting from offenses committed at the same time, as one conviction.
Key takeaways
- Check case documents before counting report entries separately.
- Read the full third-degree felony provision before applying its condition.
- Keep multi-case filing separate from conviction counting.
- Confirm both fingerprinting and delivery of the fingerprint record to the court before assuming forwarding applies.
Recruiters and hiring managers in Ohio often open a criminal history report and see a long list of convictions. The length of that list can make an applicant look worse than the underlying record really is. Ohio's sealing statute contains counting rules that tell a court when several convictions are treated as one, and two of those rules matter most when you read a report. This post explains them using the text of Section 2953.32 of the Ohio Revised Code, quotes the parts that matter, and gives you questions to ask before a screening decision. It is written for people who review records, not for anyone seeking legal advice about a specific case, and it does not decide any case for you.
Does Ohio count convictions from the same act as one?
Yes, for the statute's sealing count. The statute says: "(a) When two or more convictions result from or are connected with the same act or result from offenses committed at the same time, they shall be counted as one conviction." ( Section 2953.32)
The rule sits inside a sealing process. It tells a court how to count a person's convictions when the court decides whether and how those convictions can be sealed. The quoted sentence is about counting, not about what the underlying case records say. What it changes is the count.
The words "connected with" are broader than "the same charge." The statute does not require the charges to carry the same label or the same statute number. It asks whether the convictions are tied to one act or to offenses committed at the same time. That is a question about the facts, and the case documents are where you find the facts.
That distinction matters when you read a report. A list of entries is one thing. The number of convictions the statute counts is another. Suppose a report shows three entries, and the case documents show all three arose from one act. The same-act language treats them as one conviction for counting. Now suppose the entries describe separate acts committed at different times.
The practical lesson is simple. Before you assume an applicant has three separate offenses, look at the dates and the case documents for each entry. Ask whether the convictions were connected to one act or whether the offenses were committed at the same time. Those two facts decide whether the counting language applies. Do not rely on the number of lines on a report alone.
How does the third-degree felony rule count convictions?
The statute sets a separate condition for convictions of a felony of the third degree, and that condition depends on how many other convictions the person has. The quoted text reads: "(h) Convictions of a felony of the third degree if the offender has more than one other conviction of any felony or, if the person has exactly two convictions of a felony of the third degree, has more convictions in total than those two third degree felony convictions and two misdemeanor convictions." ( Section 2953.32)
The sentence has two branches. The first applies when the offender has more than one other conviction of any felony. The second applies when the person has exactly two convictions of a felony of the third degree. In that case the statute looks past the felony labels and compares the total number of convictions with those two third-degree felonies and two misdemeanors.
Quoted sentences are easy to misread, so take them one piece at a time. Suppose an applicant has one third-degree felony and two other felony convictions. The applicant has more than one other conviction of any felony, so on the wording quoted above the first branch's condition is met. Now suppose an applicant has exactly two third-degree felonies and three misdemeanor convictions. The second branch asks whether the total is more than the two felonies and two misdemeanors that the text names, so the misdemeanor count plays a role in the comparison.
Two cautions apply. First, read the whole subsection of the statute before you use the condition to assess sealing eligibility. The full text is on the same page linked above. Second, the example above shows how to read the words. It is not a decision about any real person, and a real case can have facts the example leaves out.
Why do these counting rules matter for a screening decision?
Counting rules matter because a long list of convictions can suggest a pattern that the statute does not count. A reader who sees ten lines may assume ten separate offenses. The statute's counting language may treat several of those lines as one conviction for sealing purposes, which changes the picture a reader should form. A correct count gives you a truer starting point, even if the final decision still depends on other facts.
The rules do not tell you what a hiring decision should be. They do not say whether an applicant should be hired, rejected, or asked for more information. Those choices depend on your organization's policies, the duties of the job, and advice from your own counsel. What the counting rules give you is accuracy about the count. A decision based on an overstated count is harder to defend than one based on a correct count, and a decision based on an accurate count still needs its own documented reasoning.
Consistency also matters. If your team reads a report with several entries one way for one applicant and another way for a different applicant, the process itself becomes hard to explain. Write down the questions you ask about each record, and ask them every time. Those questions can be short: what the dates show, whether the charges arose from one act, whether a sealing order exists, and what the job actually requires. That habit gives both the applicant and your organization a consistent review process. For the broader review, use the background report checklist.
Reviewers also tend to read a long list as a warning sign before they read it as a set of facts. Counting rules work against that reflex. They push the reader to ask how many separate matters the list really represents, and that question is a fairer place to begin than the length of the page.
Can one application seal more than one case?
Yes, an applicant may request sealing or expungement for several cases in one application. The statute says: "(3) An applicant may request the sealing or expungement of the records of more than one case in a single application under this section." ( Section 2953.32)
For a reader, this means a record that shows several cases may have been handled through one filing, or through several. Check the court file to see whether the cases were filed together. Do not infer from the number of cases that they were filed together, and do not infer from one filing that every case in it shares an act.
Filing several cases together does not make them one conviction. The counting rule and the multi-case filing rule answer different questions. One asks how a court counts convictions connected to an act. The other asks how an applicant may bring several cases before the court at once. Check the relationship between the convictions separately; the filing alone does not tell you whether the convictions share an act. Keep the two questions apart when you read a report, because mixing them up is easy when a list is long.
What happens to fingerprints and sealing orders?
The bureau step requires fingerprinting at arrest or under section 109.60 and delivery of the fingerprint record to the court under division (C). The quoted text reads: "(a) If the applicant was fingerprinted at the time of arrest or under section 109.60 of the Revised Code and the record of the applicant's fingerprints was provided to the court under division (C) of this section, forward a copy of the sealing or expungement order and the record of the applicant's fingerprints to the bureau of criminal identification and investigation." ( Section 2953.32)
The statute uses the word "forward," so the order is meant to reach the bureau as well as the court file. The step depends on both the qualifying fingerprinting and provision of that record to the court under division (C).
How a screening company or an employer displays a sealed entry is a separate question from forwarding the order. Do not assume that a report will look the same before and after a sealing order. Ask your background check provider how it handles sealed entries, and ask your counsel what your organization may consider when it reviews them. Those are separate questions from the counting rule, and they need separate answers.
Who decides whether the applicant was fingerprinted?
The probation officer or county department of probation the court directs makes that determination. The statute says: "The probation officer or county department of probation that the court directs to make inquiries and written reports as the court requires concerning the applicant shall determine whether or not the applicant was fingerprinted at the time of arrest or under section 109.60 of the Revised Code." ( Section 2953.32)
This matters because the fingerprint finding is part of deciding whether the forwarding step applies. If the applicant was not fingerprinted in the way the statute describes, the forwarding requirement does not apply on that basis. If fingerprinting occurred at arrest or under section 109.60 and the fingerprint record was provided to the court under division (C), the bureau step applies. The determination belongs to the probation officer or county department of probation the court directs, not to the applicant and not to the employer reading the file.
For a screening file, this means you should not treat a bare statement from an applicant as the answer to the fingerprint question. Check whether the record includes a probation report or other court document that reflects the officer's determination. If it does not, note the gap in your file rather than filling it with an assumption. A gap written down is easier to explain later than a guess that turns out to be wrong.
What does the April 4, 2023 date change?
The date tells you which version of an eligibility provision the statute uses for one group of applicants. The statute says: "(h) If the applicant was an eligible offender of the type described in division (A)(3) of section 2953.36 of the Revised Code as it existed prior to April 4, 2023, determine whether the offender has been rehabilitated to a satisfactory degree." ( Section 2953.32)
On that wording, an applicant who was an eligible offender of the type described in division (A)(3) of section 2953.36, as that section existed before April 4, 2023, is subject to a court determination. The court must determine whether the offender has been rehabilitated to a satisfactory degree. The phrase "as it existed prior to" points the reader back to an earlier version of the law, so the date is the key to which text applies.
For a recruiter, the point is narrow but worth remembering. When a case file refers to eligibility under the older wording, do not check only the current text of section 2953.36. Check the version that existed before April 4, 2023, which is the version the statute's wording refers to. A reader who uses the wrong version could misread the eligibility question in the file.
How do the counting rules compare?
The six quoted points in this post cover different questions, so the table gives the counting, filing and forwarding points a single line. Use it as a quick reference, then go back to the full section for the wording.
| Point | What the quoted text covers | Source |
|---|---|---|
| Same act or same time | Convictions connected with one act, or with offenses committed at the same time, count as one conviction | Section 2953.32 |
| Third-degree felonies | A condition based on other felony convictions, and on the total count when there are exactly two third-degree felonies | Section 2953.32 |
| Several cases in one application | An applicant may request sealing or expungement of more than one case in a single application | Section 2953.32 |
| Fingerprints and orders | A sealing order and fingerprint record are forwarded to the bureau if fingerprinting occurred at arrest or under section 109.60 and the fingerprint record was provided to the court under division (C) | Section 2953.32 |
Read across the table and the pattern is clear. The first rule is about how convictions relate to one another. The second is about how many convictions a person has and of what kind. The last two are about process: how a case is filed and where the paperwork goes. Mixing those categories up is the main risk. A conviction-counting rule does not answer a filing question, and a filing rule does not settle the conviction count.
Illustrative example: separate entries, one act
Suppose a report lists ten convictions, and the case documents establish that all ten resulted from the same act. For the sealing statute's same-act count, those convictions count as one conviction. Record the connection between the entries and the act rather than treating the report's length as the answer.
Today, choose a report with several entries and write down which case documents you need to check. Use the criminal record source guide to plan that review.
What should a recruiter check on a report with several convictions?
Start with the case documents, not the count on the report. Then work through the checklist below before you draw any conclusion about how many separate offenses an applicant has.
- Get the dates and charging documents for each entry. Ask whether the convictions were connected to one act or whether the offenses were committed at the same time, because that is the condition for the same-act counting language.
- Check whether the file shows a sealing order, and whether that order covered one case or several. Keep the filing question separate from the counting question.
- If any conviction is a third-degree felony, read the full subsection of the statute, including the part after the quoted condition, before you apply the rule.
- Note whether the applicant was fingerprinted, and where that finding came from. A probation report or other court document is a better source than an applicant's recollection.
- Ask your background check provider how it displays sealed entries, and write the answer in your file.
- Ask the same questions for every applicant, so that a long list is read with the same care as a short one.
These steps do not tell you whether an applicant is eligible for sealing, and they do not tell you whether a hiring decision is lawful. Those questions depend on the full statute, the facts of the case, and advice from counsel. Used well, though, the checklist keeps a reader from treating a long list as a long record. Write down what you checked, what you could not confirm, and who you asked. That note is the part of the process that will matter most if a screening decision is ever questioned.