Skip forward into hiring notes
RosterAcorn

Pay deduction records: 3 items to keep for each worker

Keep three pay deduction records for each worker: the basis for each deduction, a dated deduction log, and an item cost and return record.

Key takeaways

  • Check legal permission and keep the worker's agreement where required.
  • Log each deduction with its date, amount, and item.
  • Track equipment costs, deductions, and refunds together.
  • Check the worker's state rules before closing the file.

Each deduction looks small on its own. Across a year and a dozen workers, though, they add up, and they are among the first things a labor inspector, a payroll auditor, or a former employee asks about. Good records answer those questions in minutes instead of weeks.

This post covers the three items to keep for each worker who has a deduction: the basis for the deduction, a dated log of each amount taken, and a cost and return record for each item. It draws on several state laws so you can see what regulators look for. The laws quoted here do not cover every state, and your own state may have different rules. Treat the examples as a guide to what to check, not as a complete list.

What are the three items to keep for each worker?

Keep all three in one file for each worker, so a single review shows what was agreed, what was taken, and what is still owed or due back.

Keeping them together matters because a deduction problem is usually a gap between what was agreed and what was actually taken. A file that shows both side by side closes that gap quickly. It also saves you from rebuilding the history from memory when a worker asks a question or a reviewer requests the records.

If the signed paperwork sits in an HR folder, the amounts in a payroll spreadsheet, and the costs in a purchasing email, no single place tells the whole story. When that happens, a simple question about one worker's shirt or boots can take an afternoon to answer. Bringing the three items into one file for each worker is the fix, and it costs very little once the file exists.

Pennsylvania's rules make a similar point about the record a payroll employer must keep. They require the employer to maintain, in each employee's account:

> "a record of the dates, amounts and nature of the items which make up the total additions and deductions."

That sentence comes from 34 Pa. Code § 231.31. The three items in this post follow the same logic. The dates and amounts sit in the second item, and the reasons and costs sit in the first and third. For the wider employee account, see the guide to Pennsylvania pay records.

What is the first item: the basis for each deduction?

The basis is the written reason a deduction is allowed. It has two parts: the worker's agreement, where your state requires one, and the legal permission that lets you take the deduction at all. Start with the law, because some deductions are limited by statute regardless of what a worker signs.

Minnesota's wage statute says that deductions from wages that are not authorized by its subdivision may be taken only as authorized by three other sections:

> "Deductions, direct or indirect, from wages or gratuities not authorized by this subdivision may only be taken as authorized by sections 177.28, subdivision 3, 181.06, and 181.79."

The quote is from Minn. Stat. § 177.24. It shows that the statute, not only the paperwork, decides which deductions are allowed. A signed form is useful evidence of what a worker accepted, but it does not replace the question of whether the law permits the charge.

For each item you deduct, write down the legal permission that applies and file it with the worker's signed acknowledgement of the item and the amount. A useful basis entry includes:

  • The item, such as a work shirt, boots, or a tool kit.
  • The price or formula used to set the deduction.
  • The date the worker agreed, and a copy of what they signed.
  • The rule that permits the deduction, with its section number.

Whether your state requires a signed authorization is a question for your own state's rules. This post does not assume the answer either way. If the worker's agreement changes, for example when a price goes up, add a new dated entry rather than overwriting the old one. The earlier entry shows what was agreed at the time each charge was taken.

What is the second item: a dated log of each amount?

The second item is a log that records each deduction as it happens, with the date, the amount, and the nature of the item. A log like this lets you answer "what did we take in March?" without reconstructing the answer from wage statements. It also carries the running total, which you need for the third item.

Oregon's statute treats itemization in a similar way. One of its sections is titled "Records to be kept by employers; itemization of deductions from wages," which shows that the state's records law addresses individual deductions directly. The Oregon Revised Statutes page has the full text, and you should read the section that applies to your employees before setting your log format.

Each log entry should carry these fields:

  • The pay period and the pay date.
  • The item and the reason for it.
  • The amount taken from this pay.
  • The running total taken for that item to date.
  • A reference to the wage statement or payroll run where the deduction appears.

Show each deduction on its own line of the wage statement, not folded into a single net figure. A worker who can see a deduction by name can spot a wrong one, and a wrong one is easier to fix when it is caught on the next payday than when it surfaces months later. Keep the log in the same format for every worker, so that a reviewer can read any file without a guide.

Reconcile the log against the payroll register at the end of each period. If the total taken for the period in your log does not match the total in the register, find the difference before the next run, not during the next dispute. A correction should be a new entry that says what changed and why, so the original figure stays visible. Overwriting a number makes the file look tidier, but it removes the history you may need later.

What is the third item: the cost and return record?

The third item records what each uniform or piece of equipment cost, how much has been taken from pay toward it, and whether any part must be returned or refunded. Many firms skip this record. It becomes the critical one when a worker leaves or when someone disputes a charge.

Minnesota puts a ceiling on one kind of deduction. Its section says:

> "Deductions, direct or indirect, for up to the full cost of the uniform or equipment as listed below, may not exceed $50 or, if a motor vehicle dealer licensed under section 168.27 furnishes uniforms or clothing described in clause (1) on an ongoing basis, may not exceed the lesser of 50 percent of the dealer's reasonable expense or $25 per month, including nonhome maintenance."

The quote is from Minn. Stat. § 177.24. The first limit covers the listed uniform and equipment items. The second covers licensed motor vehicle dealers who furnish uniforms on an ongoing basis, so check which group your firm falls into before you apply either figure.

A cost record makes a limit like this easy to check. Write down the item's cost, then record each deduction against it, and stop taking deductions before the total passes the limit that applies. If the total is near the limit, the running figure in your log tells you before the next payday, not after.

Travel is a separate kind of charge. Minnesota's list of items includes:

> "travel expenses in the course of employment except those incurred in traveling to and from the employee's residence and place of employment."

That quote is from the same statute. Work travel can appear on the list, but a worker's ordinary commute is excluded. Your log should distinguish work travel from commuting when checking whether an expense falls within Minnesota's listed items. Before a mileage charge goes into the log, check it against the purpose of the trip. A drive from home to the shop is a commute, and a drive from the shop to a customer's site is work travel. The record should make that difference visible at a glance.

Which state rule should I check first?

Check the rule for the state where each worker is employed before you check anything else, because the states differ in what they require. The examples in this post come from different places, and none of them tells you what your own state requires.

Minnesota, for example, includes a posting duty in the same section that sets the deduction rules. The section says the employer must:

> "(3) post a copy of this section for the information of employees."

The quote is from Minn. Stat. § 177.24. Posting the section is a separate task from keeping records, but both belong on the same checklist, so that nobody handles one and forgets the other.

Michigan's act has a provision headed "Posting copy of MCL 409.110, 409.111, and 409.112; time record," which pairs a posting duty with time records. The heading is a starting point only. Read the Michigan Legislature's text of Act 90 of 1978 to see exactly what the posting and time record duties require before you set up a process for them.

For each state where you have workers, keep a short checklist: the deduction statute, the posting duty, the record duty, and the refund duty when employment ends. Each worker's file can then follow the same checklist. When you add a new state, you add one more checklist instead of rebuilding the process. Use the workplace poster checks alongside that checklist.

What happens to deductions when a worker leaves?

Minnesota's reimbursement rule applies to deductions for listed items when employment ends. The section says:

> "An employer, at the termination of an employee's employment, must reimburse the full amount deducted, directly or indirectly, for any of the items listed in subdivision 4, except for a motor vehicle dealer's rental and maintenance deduction for uniforms or clothing."

The quote is from Minn. Stat. § 177.24. This is where the third item earns its place. At separation, total what was deducted for each listed item, reimburse the full amount deducted subject to the quoted dealer exception, and record any amount already returned and its return date in the file. Give the worker a written statement of the figures and keep a copy in the file.

Check your own state's refund rule before you close a file. Do not assume a refund is owed or not owed because a similar rule exists somewhere else. The return record is what lets you answer the question quickly, whichever rule applies. Before processing final pay, review the guide to paycheck deduction rules.

Illustrative example: checking a running total

Keep the cost and the amount deducted separate; the difference alone does not establish permission to deduct more. Check the basis section and the applicable limit before another charge, and use the deduction total when reviewing a refund.

Today, choose a worker with a deduction and compare their latest log entry with the payroll register. Record any correction as a new entry explaining what changed and why.

How long should I keep these records, and who can see them?

Choose a retention period with your accountant or legal advisor rather than guessing. Do not discard a worker's file when they leave. The return record and the signed paperwork showing what was agreed are the documents you will want if a dispute arises after employment has ended.

Limit access to payroll and HR staff, and let each worker see their own deduction file when they ask. A worker who can check their own numbers is more likely to catch an error early, and an early error is cheaper to fix than a dispute months later. Keep the files in one place with a clear naming pattern, so that anyone authorized to see a file can find it without searching through email or shared folders.

How do I set this up without a lot of extra work?

Set up one file for each worker with three sections: basis, log, and cost and return. This is a one-time job. After that, update the file at each payroll run alongside the deduction entry.

A practical sequence looks like this:

  1. Create a file for each worker with a basis section, a log, and a cost and return section.
  2. Record each deduction in the log on payday, with the date, the amount, and the item.
  3. Update the cost and return section so the running total is always current.
  4. Check each file against the rule for the worker's state once a year, and again whenever someone leaves.

What do I show if a worker disputes a deduction?

Show the three sections of the worker's file in order: the basis for the deduction, the log of every amount taken, and the cost and return record. That order answers the questions a reviewer or the worker will ask first: why the charge was allowed, how much was taken and when, and whether the item was paid for in full or is still owed.

Show the worker the log and the cost figures before you argue about the total. Many disputes shrink once both sides look at the same dated entries. If the figures match and the worker still disagrees with the charge itself, the basis section tells you whether the deduction was permitted at all. If the basis is missing or weak, stop taking the deduction and get advice before you go further.

General information, not legal or tax advice.

Sources