Skip forward into hiring notes
RosterAcorn

Form I-9 mistakes: 5 errors to check by section

Form I-9 mistakes to check include missing names or addresses, an incorrect procedure box, a missing hire date, incomplete helper details and outdated forms.

Key takeaways

  • Review the employee's entries before they leave.
  • Compare the employer's entries with the process actually used.
  • Check the helper's certification when someone assisted.
  • Check the form version before starting.
  • Record problems and seek compliance review before correcting them.

Form I-9 is the paperwork hiring teams use to confirm a new hire's identity and work eligibility. Most people who handle it know the basics, and most of the time the form gets completed without drama. The trouble usually comes from small things: a blank line, a missing date, a box checked when it should not be, or an old copy of the form pulled from a shared folder. Small errors still matter, because a completed form can be reviewed long after the new hire's first day, often by someone who was not in the room when it was filled out.

The form has parts, and each part has a different author. The employee completes Section 1. The employer completes Section 2. If someone helped the employee fill out Section 1, that helper completes Supplement A. This post groups five mistakes by where they show up. The last mistake, using an outdated version of the form, affects the whole document rather than one section, so it gets its own heading near the end.

Every rule stated here comes from the official guidance that U.S. Immigration and Customs Enforcement (ICE) publishes on Form I-9 inspections. Each time we state one, we link the page so you can read the exact wording yourself. Staffing teams in particular often handle many new hires in a short window, with different supervisors and different people doing the paperwork, so a shared checklist helps. This post is meant to help your team check its own work before an inspection or audit reaches you. It does not replace the official instructions, and it is not a substitute for advice from an employment attorney. For a broader onboarding review, see the guide to employment eligibility checks.

What should you check in Section 1 before the file closes?

Start your Section 1 review with the name and address fields. The guidance describes the failure as one where an employer does not make sure the individual provides "his or her other last names used (if any) or a physical address in Section 1 of the Form I-9" ( ICE guidance on Form I-9 inspections).

Section 1 is the employee's part, so it is easy to assume a gap there belongs to someone else. In practice, the form lands in your files, and your team is the one who has to explain a gap later. Reading the wording closely tells you where the review should focus.

The phrase "if any" matters. Ask whether the employee has used another last name before treating that line as a gap. The reviewer's question is simply whether the form gives a physical address, not how neatly it is written or whether it matches a particular style.

Email addresses and phone numbers are a different matter. ICE's guidance states plainly: "A missing email address or phone number in Section 1 will not constitute a violation" ( ICE guidance on Form I-9 inspections). Your team may still want those details for payroll, benefits, or onboarding messages, and you can ask for them for those reasons. Just do not treat a blank contact field as a Form I-9 problem, and do not hold a file open over it.

Consider a common case. A new hire has worked under a different surname at a previous job and writes only their current name in Section 1. The form then looks complete at a glance, and the gap is easy to miss. A reviewer who reads each line item, rather than scanning for empty boxes, is more likely to catch it. Ask the question directly: has this person used any other last names? If the answer is yes and the line is empty, the review has found something to fix.

The fix is easiest during the first meeting. Sit down with the new hire while the form is still in front of you, and read the name and address fields with them before they leave. If a line that needs an answer is blank, ask about it right then. Do not fill the gap yourself with a guess about the person's past names or where they live. A guess written onto the form is harder to explain later than a blank you followed up on with the employee, and it puts your words into the employee's section.

Build the check into the same moment you hand over the form. If the new hire has already left when you read the page, the fix becomes a phone call, which is slower and more awkward for everyone involved. Reading the page while the person is still there keeps the conversation simple and the record accurate.

What do reviewers look for in Section 2?

This post covers two Section 2 points from the ICE guidance: the alternative procedure box and the date of hire.

Section 2 is where the employer records the document review and attests to it. The person who completes it has to be sure the entries match what actually happened during onboarding. That makes the first question for any reviewer simple: does the record describe the real process?

Think about a staffing team that onboards several workers on the same morning. A coordinator checks documents in one room, another person fills out the forms at a desk, and a third person files the completed packets. Under that setup, the Section 2 entries can drift from what happened, because no one person remembers every detail. A short written note of the process used for each hire helps close that gap, and it gives a reviewer something to compare the form against later.

The first item is the alternative procedure box. ICE's guidance says: "Mark the alternative procedure box in Section 2 if the employer used an alternative procedure authorized by DHS to examine documents" ( ICE guidance on Form I-9 inspections). The box records a method. Errors can run in both directions: a box left blank after an alternative procedure was used, or a box marked when it was not. Either one leaves the record inaccurate.

To prevent this, ask the person who examined the documents which process they followed before the file is closed, and make the answer part of the record. If your team has never used an alternative procedure, say so in your internal checklist, so no one marks the box out of habit or because an old copy had it checked.

The second item is the date of hire. The guidance states: "Provide the date of hire in the attestation portion of Section 2 of the Form I-9" ( ICE guidance on Form I-9 inspections).

Common errors around the date are simple. The line is left empty, a temporary entry is written in, or someone enters the day the form was typed up or signed. Those entries do not answer what the field asks for, which is the date of hire. A reviewer who sees a date that does not match the onboarding records should treat it as a question to resolve, not a detail to skip.

Before you complete the attestation, confirm the hire date against your onboarding records. Resolve any difference between those records before entering the date.

Training helps here more than reminders do. Walk new coordinators through the Section 2 entries once, using a blank form on the table, so they can see where the alternative procedure box and the attestation date sit. A person who has seen the layout is less likely to put a date in the wrong place or mark a box by accident.

When does Supplement A apply, and what must it include?

Check Supplement A whenever someone helped the employee complete Section 1. The ICE guidance describes the failure in these words: "failure to ensure that the preparer and/or translator's complete name, address, signature, and date are provided on the Form I-9 at the time of completion, when either a preparer and/or translator was used to assist the employee in the completion of the form" ( ICE guidance on Form I-9 inspections).

The supplement is tied to the Section 1 certification, and it is needed only when someone assisted. If nobody helped the employee, you do not need to add a preparer's details, and you should not have someone sign the supplement just because the form has a place for it. Check first whether anyone actually helped, and let that answer decide whether Supplement A is in play.

Missing any one of those four items is the error the guidance describes. Helpers often sign and forget the address, or they sign on one day and leave the date blank. A translator who helps a new hire read through the form may assume their part is finished once the employee signs, and then the supplement is left with a gap.

Later entries are harder to verify, and a reviewer may reasonably ask when the helper actually did the work.

Consider a bilingual coordinator who helps several workers in one afternoon. If the coordinator fills in their own details on all the forms at the end of the day, the address or date may be wrong on some of them, and no one can easily tell which. Filling in the helper's information on each form, as that form is completed, is the safer habit.

When a helper is involved, ask them to complete all four items before the form leaves their hands. If your team uses a regular helper, keep a short reminder near the workspace that lists the four items. If you are the one helping, do the same for your own entries. Then check the supplement during your review, not only the main form, because the supplement can be skipped.

Training matters for helpers as well. Many translators and preparers are trusted staff who have never read the certification language, so explain the four items before the form is in front of them. A short explanation at the start can prevent a blank line at the end.

Which version of the form should you use?

Check the form version before anyone starts completing it. The guidance says: "Failure to use a version of the Form I-9 that is current at the time any part of the form is initially completed" ( ICE guidance on Form I-9 inspections).

This is the one mistake that does not sit inside a single section. It affects the whole document. If a new hire starts Section 1 on one date and your team finishes Section 2 later, use the earlier event when checking the version.

Versions change over time, so a copy in your shared drive may look official and still be out of date. Compare the version information printed on your copy against the official source before you rely on it. A copy that looks familiar is not proof that it is current.

Consider a staffing team that downloaded a blank form last year and kept it in a shared folder. A coordinator starts a new file from that copy without checking. Nothing looks wrong on the page, which is why this error is easy to miss. A short check at the start of each file prevents it, and it costs far less time than sorting out a file after the fact.

Before you begin a new hire's file, get the form from the official source and use that copy for the process. Do not rely on a saved PDF from last year, a version attached to an old email, or a copy someone printed and left at a desk. Remove outdated downloads from shared folders so no one reaches for them by mistake. If your team uses an onboarding system, confirm that it points to the current version too.

How should you handle an error you already found?

Do not backdate or silently alter an entry on a form that is already on file; raise the problem with whoever handles compliance for your team, or with your counsel. Quiet edits are the risky move, because they make it look as though the form was right all along.

Errors are often found after the fact, during an internal audit, a routine check, or a government inspection. The first instinct is to fix the blank line or swap in the right date and move on. That instinct can create a bigger problem. A form changed without a record of the change is harder to defend than a form with an error that was found and handled openly.

A better approach is to write down what you found, when you found it, and what the form said at the time. Then talk to the person responsible for compliance about how your organization should correct it. Record any correction, clearly date it on the day it is made, and obtain approval through that review.

Prevention matters more than repair. A second-person review after each form is complete can catch many of the errors in this post before they are filed. The reviewer does not need to redo the work.

Keep a simple log of the reviews you run and the questions you raise. The log does not need to be elaborate. It needs dates, file names, and the person who handled each item, so the next review can see what came up before and whether the fix held. For a wider file review, use the hiring records audit.

Illustrative example: a review batch

The reviewer records what each form says and sends those questions to the person responsible for compliance. The team resolves them through its correction process rather than silently changing the records. These counts illustrate a review, not an expected error rate.

If your process changes, such as a new onboarding system or a new person joining the team, run the four areas on the first few files afterward. Changes in staff or software are a good time to check, because old habits may no longer match the new setup.

Today, choose a recent file and review the five mistakes covered here. Record any question and take it to the person responsible for compliance before making a correction.

Where can you confirm the official wording?

The ICE page on Form I-9 inspections is the source for every rule quoted in this post. Read it yourself, and compare it against the version of the form your team is using.

How can your team use this review?

Use this post to start a team conversation rather than to settle questions on its own. Walk through a few recent files together, and see whether any of the four areas show gaps. Changes to your process are easier to agree on when everyone has looked at the same examples.

Sources