Check the law before you post
An employer coverage log is a written record of which state employment laws apply to your firm before you post a job. A job post is the first step in hiring, and it is an easy moment to miss a state rule. Many small firms post, screen and interview without asking which state laws cover them. They find out later, often after something has already gone wrong.
A written log fixes this. It holds one entry for each state, with the same facts every time, and a date on each entry. Before anyone posts a job, they open the log, read the entries for the state where the work will happen, and confirm nothing has changed.
Key takeaways
- Keep one entry for each state where the work will happen.
- Use the same seven fields, in the same order, for every entry.
- Read the whole section, not only its definition, before you fill in the rule.
- Check each official link and record the date you read it.
- Open the matching entries before every job post.
This guide shows what goes in each entry. It uses four state examples and links only to official government text that we checked. It is general information, not legal advice. For an answer about your own firm, talk to an employment lawyer. The examples are not a full list of what your firm must follow.
Why a log beats memory
Employment laws depend on where the work is done and how many workers the firm has. The same business can be covered in one state and not in the next. Memory fails here for two reasons. People leave and take what they knew with them. Laws also change, often without anyone at the firm noticing.
Picture a hiring manager who posts a job for a worker in a neighboring state. They know the firm's home state well and assume the rules are the same next door. Nobody checked the other state's entry. The posting goes out with a wrong assumption, and nobody notices until an applicant asks a question the firm cannot answer.
A log keeps the answer in one place and shows the reasoning. A new recruiter can see which section applies and why, without a long conversation with the person who used to handle it.
The seven fields
Use the same column order for every state. Put the log in a shared spreadsheet or document that the whole hiring team can open.
- Law and section. The name of the law and its exact section number, such as Section 67-5902 in Idaho's statutes.
- Official link and check date. A link to the government's own text, and the date someone read it.
- Number of workers. How many workers the firm must have before the law applies.
- Counting period. How long that number must hold, such as a set number of calendar weeks.
- Who is covered. The employers and workers the law names, and any conditions on where the work must happen.
- What the law requires or forbids. The actual rule, in one or two plain sentences.
- Owner and review date. The person who keeps the entry current, and the next date it must be checked.
Field 6 is the one people skip. A definition section tells you whether a law reaches your firm. Only the rule section tells you what to do. Keep both in the entry.
A good entry is short. If an entry runs past a page, it is probably mixing two laws. Split it into two entries.
How to read a state law
State laws, also called statutes, are grouped into titles and chapters, and each one is split into numbered sections. A section can hold a definition, a rule, or both. Many sections start with a list of defined words, such as "employer," and then say what must or must not happen. Read both parts. So "Title 26, Section 600" means section 600 inside title 26.
Example 1: Idaho counts from five workers
Idaho defines "employer" in Section 67-5902 of its statutes. The definition covers a person who "hires five (5) or more employees for each working day." The count is taken for each working day. Read the whole section, including any time period it describes.
A firm that does not keep five workers on the job every working day falls outside this definition. Five workers on one good day is not enough.
Here is how the Idaho entry looks:
- Law and section: Idaho statutes, Section 67-5902
- Number of workers: 5 or more
- Counting period: each working day
- Who is covered: employers as defined in the section
- Rule: Not filled in yet. Find the section that states the rule and add its link before anyone relies on the entry.
Example 2: Wisconsin starts at one worker
Wisconsin defines "employer" in Section 111.32. The definition covers anyone "engaging in any activity, enterprise or business employing at least one individual." One worker is enough to bring a business within this part of the definition. Read the rest of the section too, since exceptions and other terms may appear there.
Here is the Wisconsin entry:
- Law and section: Wisconsin statutes, Section 111.32
- Number of workers: 1 or more
- Counting period: none given here; read the full section
- Who is covered: any business or enterprise that employs at least one individual
- Rule: Not filled in yet. Find the section that states the rule and add its link.
In practice, that means a Wisconsin business with one employee needs an entry too. Log it even if the firm believes it is too small for the rules it has heard about.
Example 3: South Carolina needs fifteen workers
South Carolina's employer definition sits in Chapter 13 of Title 1 of its Code of Laws, which is titled "ADMINISTRATION OF THE GOVERNMENT." Its definition of "employer" reaches "any person who has fifteen or more employees for each working day." The count is taken on each working day, so a short-staffed day matters as much as a full one. Read the full chapter to check whether any period applies to the count and whether it leaves out any groups.
Take a firm that keeps at least five but fewer than fifteen people working every working day. That firm meets Idaho's five-worker threshold but falls short of South Carolina's fifteen. So the same number of workers can be covered in one state and not in another.
Here is the South Carolina entry:
- Law and section: South Carolina Code of Laws, Title 1, Chapter 13, employer definition
- Number of workers: 15 or more
- Counting period: each working day
- Who is covered: any person with that many employees
- Rule: Not filled in yet. This is the definition only. The rule section still needs to be found and linked.
Example 4: Maine rules on employee firearms
Not every rule depends on the number of workers. Title 26, Section 600 of Maine's statutes, titled "Concealed firearms in vehicles," says: "An employer or an agent of an employer may not prohibit an employee who has a valid permit to carry a concealed firearm." An agent is someone acting for the employer. The quoted sentence sets no number of workers, so this entry has none to record.
The quoted sentence is a prohibition, but it is not the whole rule. Read the full section for the conditions that go with it before writing any vehicle or parking policy.
Maine's entry looks like this:
- Law and section: Maine statutes, Title 26, Section 600
- Number of workers: none given here
- Counting period: not applicable
- Who is covered: employers, their agents, and employees with a valid concealed-carry permit
- Rule: The employer or its agent may not prohibit a permit holder from keeping a concealed firearm in a vehicle, subject to the conditions in the full section.
What this means in practice: a rule about company vehicles or parking lots has to be checked against this section before it is written. A lawyer should review it if the firm is unsure how the conditions apply.
Illustrative example: a firm with 10 workers
Suppose a firm keeps 10 workers on the job every working day. Under a rule that counts 5 or more workers each working day, the firm meets the count on each of those days. Under a rule that counts 15 or more, it does not. The entry records both results, with the section and check date beside each.
What the four examples show
Four patterns stand out. Each one changes how you build the log.
First, the numbers differ. Wisconsin starts at one worker, Idaho at five, and South Carolina at fifteen. A firm that is small in one state can be covered by another state's law. For more on staff-size lines, see hiring laws by staff size.
Second, time matters. Idaho and South Carolina both tie the count to each working day, and Wisconsin's entry names no period. Write the period into every entry, even when the answer is none.
Third, the location of the work matters. Check each section's wording on where the work must take place, and check every state where workers are placed. A firm based in one state that sends workers to another should check both.
Fourth, the definition is not the rule. Three of our four examples start with a definition section. That is only half the entry. Field 6 holds the rule, and it is often in a different section.
The numbers are the easy part. The harder part is reading the rule section, and writing down plainly what the entry does not cover yet.
Federal rules sit on top
Federal rules can apply alongside state rules. The Genetic Information Nondiscrimination Act of 2008, known as GINA, is one example. The U.S. Equal Employment Opportunity Commission (EEOC) says on its GINA page: "It shall be an unlawful employment practice for an employer to request, require, or purchase genetic information." Read the full page for its exceptions and any number of workers before you add one to your log.
Log federal rules as their own entries, using the same seven fields. Put each one next to the state entries for the same job, so the person posting sees the whole picture.
How to check one entry
Set aside a short block of time for each state. Work through these steps in order.
- Open the official link. Do not rely on a summary, including this guide, or a search result snippet.
- Find the section number on the page and read the whole section, not just the first line.
- Write the number of workers and the counting period into fields 3 and 4.
- Find the rule and write it into field 6 in one or two plain sentences.
- Add today's date to field 2, and your name and the next review date to field 7.
- Ask the owner to read the entry once more before anyone relies on it.
Copy this layout into a new document for each state:
1. Law and section:
2. Official link and check date:
3. Number of workers:
4. Counting period:
5. Who is covered:
6. What the law requires or forbids:
7. Owner and review date:
When more than one state applies
Some jobs touch more than one state. The worker may live in one state, report to an office in another, or do the work across a border. Use the entry for each state where work will be performed, and write a note that says why. For pay rules across states, see multi-state pay compliance checks.
If the answer is unclear, do not post yet. Send the question to the owner in field 7 and ask for a written answer from a lawyer if the stakes are high.
When a law changes
Write the change date in the entry and keep a short note of what the old rule said. That note shows what applied on past job posts, which helps if a question comes up later.
Then update the other six fields, re-read the official text, and note the new check date in field 2. Tell the hiring team the same day, so no one posts a job using the old entry.
How to keep the log current
Set a schedule and write the next review date in field 7 of every entry. A common pace is once a year, and a lawyer can review the whole log then. Check sooner when you start hiring in a new state.
Name one owner. If nobody owns the log, nobody will notice when a link breaks or a law changes.
Keep the link and the check date together. A link alone does not show when someone last read the text.
Keep a simple record of how many workers were on the job each working day. If a law counts workers over a period, you can show the count when someone asks.
Common mistakes
- Working from memory instead of the official text.
- Assuming one state's worker count works in the next state.
- Stopping at the definition section and never adding the rule.
- Checking the office address when the work happens somewhere else.
- Writing a policy first and checking the law later.
- Keeping the log in one person's email or desk drawer.
Next steps
- Build the log with the seven fields.
- Add the four examples above as starting entries, after you open each official link yourself.
- Name an owner and set the first review date.
- Before the next job post, open the entries for every state where the work will happen.
Your next step today: open the official link for one state in this guide, read the whole section, and fill in its seven-field entry.
Frequently asked questions
Does a coverage log replace legal advice?
No. The log is general information, and an employment lawyer should answer questions about your own firm.
How many fields does each entry need?
Each entry uses seven fields, in the same order for every state.
Why is field 6 easy to skip?
People often stop at a definition section, which shows whether a law reaches the firm but not what to do. Field 6 holds the rule.