Skip forward into hiring notes
RosterAcorn

South Carolina violation counts: 8 record fields

South Carolina counts each new employee whose immigration status is not verified as required as a separate violation.

Key takeaways

  • Name one owner for verification on every hire file.
  • Keep the two sections on separate tracks.
  • Keep a dated log for lookback questions.
  • Confirm probation dates with counsel before setting calendar reminders.

Start with the counting rule

That phrase hides three separate questions. How is one missed check counted? How far back does the state look when deciding whether a problem is a repeat? And how long does a first violation stay on the record? The answers sit in the state's verification and license-discipline chapter, Code of Laws, Title 41, Chapter 8. This post walks through them in plain language.

This post is a practical guide, not legal advice. Use it to build your process and to ask better questions of your company's counsel. Read the statute itself before you rely on any summary.

Each new hire is its own violation

The chapter states: "For purposes of this chapter, it shall be a separate violation each time the private employer fails to verify the immigration status of a new employee as required by Section 41-8-20." ( statute)

Read literally, the unit of counting is the new employee. It is not the audit, the month, or the complaint.

Illustrative example: count missed checks

If a recruiter onboards 10 people in one week and verification is skipped for 5 of them, the language points to 5 separate violations, not one. For a staffing firm that places many temporary workers, one busy week can add up fast.

That is why verification belongs on each hire record. A step that someone "gets to" in a weekly batch leaves room for skipped checks. Use the new hire verification steps to review the process alongside each hire record.

Name one owner for the verification step on every file. Recruiters often enter the hire, coordinators schedule the start date, and payroll sets up the account. Each handoff is a point where a check can be skipped without anyone noticing. The owner should be the person who confirms completion before anyone else acts on the hire.

Mismatches need their own care. A mismatch result is a step in a process, not a finding about the worker. E-Verify's self-check page, written for workers, says: "Receiving a mismatch result does not necessarily mean that you are not authorized to work in the United States." It adds: "If necessary, follow the steps outlined by the E-Verify Tentative Nonconfirmation (mismatch) process to resolve any issues." For your team, the practical step is to work through that process and date each step in the file, so the record shows how the question was resolved.

Ask counsel how the state treats a verification that was finished but later questioned. A question like that belongs with counsel, not with a guess made in the office.

Two section numbers, two ladders

Penalty language points to two sections, 41-8-20 and 41-8-30. The verification duty is in Section 41-8-20. The penalty rules run on two tracks, each with its own sequence of occurrences and suspension ranges. Read Section 41-8-30 before you map your practices to it.

TrackOccurrenceWhat the statute sets
Section 41-8-30FirstTen to thirty days of mandatory suspension
Section 41-8-30Second Thirty to sixty days of mandatory suspension
Section 41-8-20Subsequent, with a violation in the previous three years Ten to thirty days, ordered by the director
Section 41-8-20Subsequent, with no violation in the previous three yearsTreated as a first occurrence

Keep the two tracks separate in your records. A log that says "E-Verify violation" without naming the section can hide which ladder applies, and that is the detail a reviewer will ask about first.

The Section 41-8-30 ladder

On the Section 41-8-30 track, the first-occurrence language says licenses "must be suspended, and must remain suspended for at least ten days but not more than thirty days." For a second occurrence, the statute raises the range: licenses "must remain suspended for at least thirty days but not more than sixty days."

Do not assume the shortest suspension will apply. Ask counsel how the length within a range is chosen.

Keep your own record of which hires belong to which occurrence, so you can explain the timeline if the state asks.

Staying open during a suspension

The statute also covers a suspended employer that keeps working. If a private employer "engages in business or employs a new employee during the period that the private employer's licenses are suspended," the licenses "must be revoked, and must not be reinstated for a period of five years." Reinstatement then depends on the director determining compliance with item (4) of the subsection.

Three things in that language matter to a recruiter. It covers two activities: engaging in business, and employing a new employee. The consequence is revocation, not a longer suspension. And reinstatement cannot happen for five years, even then only on the director's determination about item (4). Read the full subsection before deciding what a reinstatement request would need.

For a staffing team, the lesson is simple. A suspension is not a pause in which hiring can continue quietly. Employing a new employee during a suspension is the conduct the statute names, and the penalty is revocation. Make a rule that no new worker starts until counsel has confirmed the employer's status in writing.

This rule also affects scheduling. A start date set weeks earlier may fall inside a suspension window if one is ordered later. Build a status check into the calendar, so anyone booking a start date sees the current status before the date is confirmed with the worker or the client.

The three-year lookback for Section 41-8-20

The verification track has its own rule for repeat counts. It reads: "Any subsequent occurrence involving a violation of Section 41-8-20 by the private employer must result in the suspension of the private employer's licenses for at least ten days but not more than thirty days by the director, except, if a private employer has not committed a violation of Section 41-8-20 within the previous three years, a subsequent occurrence must be treated as a first occurrence."

The lookback is narrow. As written, the exception turns only on prior Section 41-8-20 violations. A Section 41-8-30 violation does not, on this text, count toward the three-year window. Check that with counsel if your records include both kinds.

Consider a hypothetical employer whose only earlier Section 41-8-20 violation falls outside the three-year window, and which has had none since. If it has a new Section 41-8-20 violation, the exception applies, and the new occurrence is treated as a first occurrence. The same employer with an earlier violation still inside the window would not get that treatment. The earlier violation counts against it.

Confirm with counsel what date the three years are measured from. Borderline dates are where that question matters, so take them to counsel rather than settling them in the office.

For that reason, keep a dated log of every Section 41-8-20 occurrence. A record that says "no prior issues" without a date search cannot answer a lookback question. If someone is asked whether the employer has a clean three years, they should be able to point to dates in the log.

Probation and the one-year window

The last rule concerns the list. The statute reads: "The director shall remove a private employer from the list who has committed only a first occurrence pursuant to Section 41-8-20 six months after the private employer's name has been published, if the private employer has not subsequently had their licenses disciplined pursuant to this chapter within the one year probation period."

Two periods are in play. Removal comes at six months, but the probation period is a full year. For planning, treat the whole year as the window in which the employer must stay out of further license discipline. Do not treat the six-month mark as the end of your exposure.

If a Section 41-8-30 occurrence is involved, do not borrow the six-month rule without checking the statute.

Calendar the six-month mark from the publication date; confirm the one-year probation period's starting point with counsel before calculating its end. Put the six-month mark and the confirmed one-year mark on the shared calendar your team uses for suspensions, so anyone checking status sees both at once. Note in the entry whether any license discipline occurred during the window.

Build a count record your team can check

A simple shared sheet, kept up to date, answers most questions before they become problems. Each row should be one hire or one occurrence, with fields for the following:

  • The employee's name or internal ID, and the hire date.
  • The date verification was completed, or the date it was missed.
  • The section involved, either 41-8-20 or 41-8-30.
  • The occurrence number for that section.
  • Suspension start and end dates, if any.
  • The date of any later license discipline.
  • A provisional lookback date; confirm the unresolved measurement start with counsel before relying on it.
  • The publication date of any listing, with the six-month date and the confirmed probation dates beside it.

Review the sheet at least once a month, and assign one person to own it. Add a second-person check on new hire records before any start date is confirmed. The second check does not need to be slow. It only needs to catch the file where the verification step was skipped, which is the file that creates a count.

The sheet also protects against mistakes that come from memory. People remember that "we had a problem a few years ago," but they rarely remember the exact date or the section. A dated record turns that vague memory into an answer you can check against the statute, and it shows a reviewer that your team tracks the right things. Use the recruiting records audit when reviewing the supporting files.

Check one hire record today

Tie verification to each hire, keep dated records by section, and check the employer's status before anyone is placed. Today, choose one hire record and check it against the fields above. Write down any missing dates or unresolved questions for counsel, and read the statute yourself before you rely on any summary, including this one.

Related guides: E-Verify deadlines for federal contracts: 90 and 30 days · Florida E-Verify cure window: 7 practical steps · South Carolina penalty clocks: 3 timing rules to know.

Questions the sources do not answer

When does the three-year lookback start?

Confirm the measurement date with counsel before relying on a borderline date. Bring the dated occurrence log so the answer can be applied to your records directly.

What triggers a Section 41-8-30 violation?

Read Section 41-8-30 with counsel before classifying an occurrence. Write down the facts of your case rather than assigning a section from the penalty range alone.

What does item (4) require for reinstatement?

Read item (4) of the subsection before preparing a reinstatement request. Bring the employer's compliance records to counsel for review.

When does the one-year probation period begin?

Confirm the starting event with counsel before calculating the probation end date. Keep that question separate from the publication date used for the six-month removal mark.

How is a suspension length chosen?

Ask counsel how the director determines the length within the applicable range. A written question is faster to answer and less likely to be misunderstood than a general description of the problem.

Federal Form I-9 penalties are a separate question. They come from federal law, not the South Carolina chapter, and this post does not cover them. If your team also handles federal I-9 inspections, start with the ICE page on Form I-9 inspections and read the federal material on its own terms. Do not mix federal and state rules in one count, because they follow different statutes and may be measured differently.

The short version for your team

Each new employee who is not verified as required is a separate violation under the statute. Keep the two sections on separate tracks. On the Section 41-8-30 track, a first occurrence brings a mandatory ten-to-thirty-day suspension, and a second brings thirty to sixty days. On the Section 41-8-20 track, a subsequent occurrence brings ten to thirty days unless there has been no Section 41-8-20 violation in the previous three years, in which case it is treated as a first occurrence. A company with a single Section 41-8-20 occurrence can come off the published list six months after publication, if it avoids later license discipline during the one-year probation period.

Build your process around those facts. Tie verification to each hire, keep dated records by section, and do not let a suspension pass without checking status before anyone is placed. Then take the open questions to counsel, and read the statute yourself before you rely on any summary, including this one.

Sources