The 90-day quit rate is employees who left within a 90-day period, divided by hires in that same period, multiplied by 100. The internal promotion rate is the number of internal promotions divided by total hires for the same period, multiplied by 100, so both come out as percentages you can compare over time.
Sharp takeaways
- Count leavers and hires from the same 90-day window so the quit rate compares like with like.
- Two leavers out of 10 hires gives a 90-day quit rate of 20%.
- Divide internal promotions by total hires for the same period, not by a different group.
- Read the two rates together: one shows who leaves early, the other shows who moves up.
Calculating the 90-day quit rate
The 90-day quit rate measures early attrition, meaning how many of the people you hire leave before their first 90 days are up. Indeed's HR KPI guide gives the calculation in one line: divide the number of employees who left within a 90-day period by the number of employees hired in the same period, then multiply by 100.
Two phrases in that wording matter as much as the arithmetic. The first is "within a 90-day period." The count of departures is limited to people who leave inside that window, so the rate reflects early exits rather than turnover across the whole workforce. The second is "hired in the same period." The numerator and denominator must come from the same stretch of time. If you count leavers from one quarter but divide by hires from another, the percentage no longer describes any real group of people.
Because the rule is a simple ratio, you can recalculate it for every hiring cohort you track. Whether you review it monthly, quarterly, or after a large hiring push is up to your team, but the formula stays the same. The output is a percentage, which makes it easier to compare a busy period with a quiet one.
Write the definition into your recruiting dashboard. When a hiring manager asks why the figure moved, the team can answer from the same two counts every time instead of rebuilding the calculation from memory.
Side-by-side: 90-day quit rate and internal promotion rate
| Measure | 90-day quit rate | Internal promotion rate |
|---|---|---|
| Numerator | Employees who left within a 90-day period | Internal promotions |
| Denominator | Employees hired in the same period | Total hires for the same period |
| Formula | (Leavers ÷ hires) × 100 | (Promotions ÷ total hires) × 100 |
| Worked example | 2 leavers out of 10 hires = 20% | 10 promotions out of 40 positions filled = 25% |
| What it signals | Early exits from new hires | Movement of hires into larger roles |
Both rates use the same skeleton: a count of people, a count of hires, a division, and a multiplication by 100. What differs is the group in the numerator. The quit rate counts people who leave early. The promotion rate counts people who move up inside the company. Keeping those two numerators separate is what makes the pair useful together.
Indeed's examples show the same arithmetic at different scales. The promotion example's denominator covers a full year, not a single cohort, so state the period alongside every figure you publish.
Reading the two rates side by side also changes the conclusion. A high quit rate paired with a low promotion rate suggests people are leaving before they see a path forward. A low quit rate paired with a high promotion rate suggests hires stay and advance. Neither figure tells that story alone, which is why the table is worth checking before you share either number.
Worked example: 90-day quit rate with 10 hires
If you hire 10 people and two of them leave within the same 90 days, your 90-day quit rate is (2/10) x 100, or 20%.
| Figure | Value |
|---|---|
| Employees hired in the period (denominator) | 10 |
| Employees who left within the same 90 days (numerator) | 2 |
| Calculation | (2/10) x 100 |
| 90-day quit rate | 20% |
The hires figure is the denominator and the leavers figure is the numerator. If those 10 people were hired in one month and the two departures fell in a different window, the 20% would be wrong even though the arithmetic is correct.
With only 10 hires, one exit can move the figure a lot, so treat a small-group rate as a prompt to look at why people left, not as a final verdict.
Calculating the internal promotion rate
The internal promotion rate shows how often your hiring activity ends with someone moving up inside the company. Indeed's HR KPI guide defines it by dividing the number of internal promotions by the total hires for the same period, then multiplying by 100.
Two choices in that definition deserve attention. The numerator is internal promotions, so the formula counts people who were advanced, not every internal move. The denominator is total hires for the same period, which means the rate is measured against everyone you brought in during that stretch, not only against roles that were open to internal applicants. Write both choices into your definition so colleagues apply the rule the same way.
Because the rate compares promotions with hires within one period, the time frame carries much of the meaning. A short window may show few promotions simply because few people have reached the point where a promotion is due. A longer window gives a broader base.
Since the result is a percentage, you can track it over time. A rising figure shows that a larger share of your hiring activity is ending in internal advancement, which can indicate that your organization is developing its people. A falling figure is a prompt to ask whether the route to promotion has become harder to reach, or whether fewer hires are ready for one.
Internal promotion rate with 40 positions
Indeed's real-world example applies the promotion formula to a year of hiring. If you fill 40 positions in a year and 10 of them are internal promotions, your internal promotion rate is (10/40) x 100, or 25%. The case appears in Indeed's HR KPI guide.
| Figure | Value |
|---|---|
| Positions filled in the year (total hires) | 40 |
| Internal promotions in the year (numerator) | 10 |
| Calculation | (10/40) x 100 |
| Internal promotion rate | 25% |
The result means one of every four positions filled in that year went to someone already inside the company. Reading the figure this way makes it concrete for managers who are not used to percentages.
The number of positions is what makes the figure meaningful. A rate of 25% from 40 positions is built on the same calculation as a rate from a much smaller or larger group, but the amount of evidence behind it differs. Report the count of positions alongside the percentage so readers can judge how much weight the result can carry.
Keep the promotion count tied to the hiring record. Each promotion should be traceable to a position that was filled during the period, so the numerator and denominator describe the same set of decisions. If a promotion is recorded but the matching position is not, the rate will overstate internal movement.
Time to proficiency and the 90-day window
A 90-day quit rate tracks people who leave early, but it says nothing about whether the people who stay are doing the job well. Indeed's HR KPI guide illustrates the gap with a sales rep: if the rep is hired on September 1 and starts reaching the goal on January 1, the time to proficiency is four months.
Count the months in that example and you find a mismatch. September 1 to January 1 is four months, which is longer than 90 days. A hire who is still ramping up at day 90 can look healthy on the quit rate because they have not left, while still being far from full productivity. The two measures answer different questions. The quit rate asks whether people stay. Time to proficiency asks how long it takes them to contribute at the expected level.
That difference is why the 90-day window needs careful reading. A low quit rate is good news for retention, but it does not prove that onboarding worked. A person who leaves on day 95 falls outside the 90-day quit rate, even if the early months were hard for them. If you want a fuller picture, pair the window with a proficiency measure for roles where ramp-up takes longer.
A practical step is to note the typical ramp time for each role using your own records, then compare it with the window you use. If ramp time is longer than your window, the quit rate will not show much of what new hires experience in the stretch that matters most for their success. For a fuller view of performance, see quality of hire score weights.
Keeping hiring records open for review
Both rates are only as trustworthy as the records behind them. When a leader asks how a figure was produced, the answer should come from documented data rather than memory. For each hire, keep the start date, role, hiring cohort, and any departure date and reason. Those fields let you rebuild the numerator and denominator for any 90-day window or promotion period you report. For a check on your files, see recruiting records audit.
Good records also make review easier. A colleague or auditor should be able to pick any figure and trace it back to the individual entries behind it. Store the underlying lists, not only the summary percentage. A quit rate of 20% means little to a reviewer who cannot see which two departures were counted or which ten hires made up the group.
Decide in advance how long records will be kept and who may access them. Those choices depend on the rules that apply to your organization and location, so check them with your HR, legal, or compliance advisers rather than assuming a standard. Whatever period you choose, apply it consistently, and avoid deleting records in a way that changes past rates without a note.
Finally, use one set of data definitions across the team. If one person counts a transfer as a departure and another does not, the quit rate will drift even though the formula never changed. Write the definitions down, date them, and record any change, so trend lines stay comparable over time.
Data removal requests and what they mean for tracking
Recruiting data includes applicant information as well as employee records, and the two may be handled differently. Workable's AI recruiting page states one vendor's practice: it can delete a person's data on request and removes it from its systems.
For someone who owns these metrics, the key point is separation. A deletion request concerns one applicant's personal data. It does not automatically change the counts behind the rates, which are the number of hires and the number of people who left. Keep an aggregate record that states how many hires and departures occurred in each period, so those totals stay intact when individual applicant files are removed.
There is a catch. If the only place a hire was recorded is an applicant file that gets deleted, the denominator can quietly shrink. Before you remove anything, confirm that the hire still appears in the employee or HR system you use for measurement. Removal happens on request, so your own process has to decide what the measurement system keeps and why.
Document the approach. List which fields are kept for reporting, which are removed when a request comes in, and how the team handles a request from someone who was later hired. With those steps written down, the quit and promotion figures stay consistent even as applicant files are cleaned up.
Paid leave and keeping hires on the job
Leave is one place where a simple quit rate can mislead. An employee on leave has not left the company, yet may be absent from work for weeks. If your team counts every absence as a departure, the 90-day quit rate will rise for reasons unrelated to whether new hires are satisfied. If it ignores leave entirely, the rate may miss real exits that happen after someone returns. Both problems are fixable with clear rules.
Start by defining what counts as a departure. A common approach is to count only separations from employment, such as resignations, terminations, and other formal endings of the working relationship. A person on approved leave stays on the roster unless the leave ends in separation. Write that rule down and apply it to every cohort, so the numerator stays consistent over time.
Leave also matters for the retention story. New hires who understand what leave options exist and how to use them may feel more secure about staying. Hires who find the process unclear may decide to leave. You can capture this by pairing early-exit counts with notes from exit conversations, rather than treating every departure as identical.
Leave programs vary widely by location and employer, and the rules governing them differ from place to place. Confirm your obligations with HR or counsel before you finalize a definition. Your measurement rules should reflect each person's actual employment status, not an assumption about what leave means.
Which one should you pick?
The two rates answer different questions, so the right starting point depends on what you need to learn. If you can track only one measure for now, choose the one that matches your most pressing concern. A team losing people within the first few months should begin with the 90-day quit rate, because it isolates early exits. A team that wants to show internal growth should begin with the internal promotion rate, which shows how often hiring activity ends in advancement.
| Option | Question it answers | Example from this post | Main blind spot |
|---|---|---|---|
| 90-day quit rate | How many new hires leave within 90 days? | 2 leavers out of 10 hires = 20% | Says nothing about how well people are performing or ramping up |
| Internal promotion rate | How often do hires end in an internal promotion? | 10 promotions out of 40 positions filled = 25% | Reflects only the period measured, and a small base can swing sharply |
Neither option is a complete answer on its own. The better choice is often the one that prompts the next question. If the quit rate is high, look at onboarding and early experience. If the promotion rate is low, check whether new hires can see a path upward. Once you have both, track them for the same periods, so each figure carries its context. For other measures to pair with these, see hiring scorecard metrics.
Next step today: pull the hire and departure lists for your most recent 90-day window and calculate the quit rate using the formula above.
Related guides: 3 new-hire costs and setup duties to fix before day one · 3 availability reasons to collect at temp hire intake.
Reader questions on quit and promotion rates
Do the 90-day quit rate and internal promotion rate need the same time period? Each rate needs its own numerator and denominator drawn from one period, so state the period for each figure you report.
If a new hire leaves on day 95, does that count in the 90-day quit rate? No. The 90-day quit rate counts employees who left within a 90-day period, so a departure after that window falls outside it. It still matters for your retention review and should be tracked separately.
Why report the quit rate as a percentage instead of a raw count? A percentage adjusts for hiring volume. A rising number of leavers can simply reflect a larger hiring push, while the rate compares departures with hires in the same period.
Does a 90-day quit rate show whether new hires are performing well? Not by itself: time to proficiency can run past the 90-day window, as the sales rep example shows, with four months from September 1 to January 1. For roles with long ramp-up, pair the rate with a proficiency measure.
What happens if an applicant asks you to delete their data? Workable says it can delete a person's data on request and removes it from its systems, as stated on its AI recruiting page. Your own process should handle personal data requests in line with the rules that apply to you, while your aggregate hire and departure counts stay documented.
Can I remove an applicant's file after they are hired? Not until the hire is recorded in your employee or HR system, because the denominator depends on that record.
How long should applicant data be kept? Set your own schedule with HR or legal advisers and apply it the same way to every cohort so the rates stay comparable. For reference on how the vendor handles deletions, see Workable's page.