Staffing companies hired 9.5 million temporary and contract employees during 2025, so every intake desk faces the same scheduling problem at scale. Collect availability at intake for three reasons: temps often juggle school, second jobs and child care, most staffing employees work full time, and many are bridging to a permanent job.
Sharp takeaways
- Ask every temp for availability at intake, not after the first shift.
- Keep school, second job and child care limits as separate facts.
- Plan full-time offers knowing that most staffing employees already work full time.
- Treat a bridge-job goal as planning information, not a judgment about commitment.
- Keep standing availability and one-off time-off requests in separate entries.
The answer up front: 9.5 million temp hires in 2025
The most useful number for intake is the hire count. The staffing industry statistics page reports that staffing companies hired 9.5 million temporary and contract employees during 2025. Each hire should begin with a conversation about when the worker can actually show up, and that conversation is the cheapest place to head off scheduling problems.
A hire count measures volume, not headcount on any given day. Volume still matters, because the same intake questions repeat across a desk. A clear, consistent form saves rework for every recruiter who touches the file. When a coordinator has to chase a temp for school hours partway through an assignment, the cost shows up as a missed shift or a rushed replacement.
Think of intake as the moment you know least about what a worker can handle and most about what the client expects. Availability is one of the few constraints a temp can state immediately, without a test or a reference check. Asking for it at first contact turns a vague promise into usable information, and schedulers will reach for it when the calendar fills up.
The three reasons below take availability in turn. Start with the scale of the workforce, since that is what makes these reasons matter across a whole branch rather than a single placement.
Scale of the temp workforce in 2025
| Measure for 2025 | Figure | What it means at intake |
|---|---|---|
| Employees given job or career opportunities | About nine and a half million | The wider pool that passes through staffing |
| Temporary and contract employees hired | 9.5 million | Volume of new intake decisions |
| Temporary and contract employees working in an average week | Nearly 2.0 million | People on active schedules at one time |
The table reads as a ladder. The annual figures show how much intake the industry handles, and the weekly figure shows how many people are on active schedules at one time. The statistics page reports that staffing provided job and career opportunities for about nine and a half million employees in 2025, and that nearly 2.0 million temporary and contract employees worked in an average week that year. These measure different things: people who had work at some point in the year, and people working in a typical week.
Across the industry, nearly 2.0 million temporary and contract employees work in a typical week, so a consistent intake form matters more than a clever one. Inconsistent fields create gaps that compound when a branch manages dozens of assignments at once. One coordinator might write "weekday evenings" while another writes "after 5," and the scheduler then has to translate between them for every placement.
Scale also explains why availability cannot be an afterthought. The people in that weekly group are not identical. Some are in school, some hold a second job, some handle child care, and some work full time.
Use the annual figure when explaining the size of the business to leadership, and keep the weekly figure in mind when judging how many active schedules a desk can hold. Many coordinators treat intake as paperwork, but these numbers argue for treating it as planning infrastructure.
Reason one: temps juggle school, second jobs and child care
A scheduling help center begins with a plain admission: "We understand that there will be times when you are not available to work." That sentence treats unavailability as a normal part of work, not a failure to manage later. Intake should take the same view. A temp who cannot work certain hours has a fact that matters from day one, and learning it early is far cheaper than discovering it during a shift.
The same help center names what those limits can look like: "This could be a school schedule, a second job, or even when you don't have child care available." Those examples cover a student, someone with a second job, and someone who needs child care to work. Each creates a different pattern, so the intake form should capture the pattern rather than a simple yes or no.
A school schedule is usually fixed and repeats, so note those hours once and plan around them every week. A second job can change with the other employer's posted hours, so ask for that schedule rather than only whether the job exists. Child care is harder to predict because the arrangement depends on people outside the placement. Asking which hours are covered gives you a window to schedule within, and it also tells you which hours the temp is least likely to change without warning.
Separate fields make each reason actionable. "Not available" tells a scheduler nothing. Compare it with an entry that says the temp is available on weekday evenings but not on one weekday because of a standing second-job shift. That entry gives a window and an exception. Ask for the window first, then the exceptions, and keep both as separate fields.
A form that asks only whether the temp is available hides the reason, and the reason is what predicts the conflict. Two temps who both answer no may need completely different plans. One may be able to trade a single evening for a daytime shift, while the other may not be available at any hour the client needs. The scheduler can only tell them apart if the intake answer says why.
Reason two: most temps work full time
Temporary work is often thought of as part-time, so an intake form may default to casual availability. The statistics page reports that most staffing employees (73%) work full time, comparable to the overall workforce (75%). The two shares are close, so a temp arriving at your desk is likely planning for full-time hours, not casual shifts.
| Measure | Figure | Use at intake |
|---|---|---|
| Staffing employees working full time | 73% | Ask about full-time availability as the default question |
| Overall workforce working full time | 75% | Staffing sits close to the wider workforce |
Full time changes what a coordinator should ask. A full-time temp still has school, a second job, or child care to plan around, so full-time hours do not equal free hours. Ask how many hours the temp can give, then which of those hours are already spoken for. Those two questions produce a clearer picture than a single full-time checkbox, and they surface conflicts before the first schedule is published.
Full-time status also affects offers. A coordinator can plan for a whole week of hours rather than splitting one temp across several short placements. Settle the hours the temp wants before an offer is made, and keep the agreed total beside the availability windows so the two do not drift apart. If the temp later asks for fewer hours, the change should be written as a new dated entry, not written over the original agreement.
Treat full time as the baseline for every temp, and treat any reduced-hours answer as a specific constraint to explain. The reason behind a reduced-hours answer shapes the plan. A reduced-hours answer caused by child care calls for a different response than one caused by a standing school schedule, even though both lower the total.
Reason three: many temps are bridging to a permanent job
The third reason is about intent. The same statistics page reports that about 64% of staffing employees work in the industry to fill in the gap between jobs or to help them land a job. A large share of the temps at your desk may see the assignment as a bridge rather than a destination. They may be interviewing elsewhere, or waiting for a permanent start date.
Bridging affects scheduling in a specific way. A temp who expects to leave within weeks is a different planning problem from one who expects a long assignment. Intake should ask about the expected length of the bridge, the kind of role the temp is seeking, and whether any start dates are already fixed. Keep those answers with the availability windows, so a scheduler can see when a gap might open.
A bridge goal does not mean the temp is less committed. The same person can be reliable on every shift and still look for a permanent role. Treat the goal as planning information, not a judgment, and avoid intake language suggesting the assignment must become the temp's career. Ask once, note the answer plainly, and revisit it only if the situation changes. A temp who starts a new interview process mid-assignment should be able to say so without worrying that the placement will be cancelled.
The table compares the three reasons on the same measures. Use it to decide which fields belong on the intake form.
| Reason | Source figure or example | Intake question | Risk if skipped |
|---|---|---|---|
| School, second job or child care | Examples named in the help center guide | Which hours are fixed, and which repeat? | Standing conflicts surface mid-assignment |
| Full-time work | 73% of staffing employees | How many hours can you give, and which are already taken? | Overcommitted full-time plans |
| Bridging to permanent work | 64% of staffing employees | When do you expect to move on? | Sudden gaps with little notice |
Unavailability or time off: which feature to use
The help center separates availability from leave. It describes two different features for communicating this information to an employer, so the choice matters before the temp starts. Pick the feature that matches the kind of limit, so the schedule stays accurate.
Match the limit to its pattern. Repeating limits belong in the standing availability record, and one-off absences belong in a dated request. Keep the two entry types separate, so standing limits and one-off absences stay easy to tell apart.
Use these rules of thumb when you set up the form:
- For one absence on a known date, use time off.
- If you are unsure whether a limit repeats, start with unavailability and ask the temp about the pattern, because the value of the information lies in the pattern rather than in any single date.
Once the feature is chosen, use the same start and end format for every entry, so every scheduler reads both features the same way. A consistent format also makes it easier to look back at a temp's history when a dispute about hours comes up.
Clock-in limits at intake
Availability and clock-in are linked. If a placement depends on recording time through a phone app that needs a live connection, the coordinator should know before the first shift, not during a shift when a phone has no signal.
A temp's availability window is only useful if the worker can start and stop shifts inside it. A client site with weak coverage, a storage room with thick walls, or a warehouse floor with poor signal can turn a workable schedule into a missed punch. Intake can ask where the temp will work and whether the site has reliable connectivity, then note any gap.
This takes one line on the intake form: the clock-in method and whether the site has dependable connectivity. Pass that line to the scheduler with the availability windows, so both appear together when shifts are assigned.
Many temps will clock in on a phone, so check whether the placement's clock-in app has the same connection requirement. For intake, a temp's phone is part of the placement plan, not just a personal device. Ask whether the phone and data plan will work at the assignment site. The question is practical, not personal, and it prevents surprises about how the worker will clock in.
| Clock-in situation | What the help center states | Intake note to record |
|---|---|---|
| Mobile app | Requires an active connection | Signal at the site and the temp's phone plan |
| Phone with no signal at the site | No fallback is described in that help center | How the client wants the temp to record time |
The quoted rule gives no fallback, so confirm the fallback with the client before the first shift. Ask the client directly what happens when signal is weak, and put the answer in the placement notes. A clear answer on day one prevents disputes over hours on the first pay cycle.
Putting the three reasons into one intake form
A useful intake form does not need many questions. It needs the right ones, asked in an order that lets the coordinator build the schedule without guessing. Start with the hours the temp can work in a typical week. Follow with the fixed commitments that take hours away, such as school, a second job, or child care. Then ask about the full-time target and the expected length of the assignment.
This is the place to record answers, and this is where separate fields matter most: keep every answer in its own field, dated, and in one place the scheduler can find. A single free-text box tends to hide the exceptions, and a scheduler reading it later may miss a standing conflict buried in a sentence about something else. Separate, dated fields also make it easy to sort temps by constraint when a client asks for a specific block of hours. An availability window written in the spring may no longer hold in the autumn, when a school term or a second job's schedule has changed, and the date tells the scheduler when the information was last confirmed.
Finally, keep the form short enough that temps finish it. A long form that gets rushed produces worse answers than a short form completed carefully. Three clear groups of questions are usually enough: availability, commitments, and placement logistics such as clock-in method and site connectivity.
Confirming availability at the first shift
Intake is the starting point, not the final word. Revisit the entry at the first shift, when the temp and the coordinator can compare the schedule with what actually happened. A quick conversation at that point catches problems early, while changing the plan is still simple.
Ask the temp whether the standing windows still hold, whether any new commitments have appeared, and whether the clock-in method worked at the site. If something has changed, update the entry and note the date. A temp who sees their information kept current is more likely to report changes promptly in the future.
Set a review point for the whole schedule as well. A repeating limit such as a school schedule can change when a term ends, and a bridge goal can change when an interview succeeds or falls through. Revisit the entry whenever the assignment changes, and whenever the temp reports a change in circumstances.
Sample availability entries
The three examples from the first reason suggest three entry patterns. Weak entries tell a scheduler almost nothing, while stronger entries give a window and an exception.
| Limit type | Weak entry | Stronger entry | Why it helps |
|---|---|---|---|
| School schedule | "Student" | Weekday mornings during the school term; free afternoons | Shows a repeating window |
| Second job | "Has another job" | Standing shift on one weekday; the other employer's posted pattern | Shows the exact conflict |
| Child care | "Can't work nights" | Available when child care covers the hours; coverage confirmed for each change | Shows the condition behind the limit |
Read each entry as two parts: the window the temp can work, and the conditions that can narrow it. A school entry gives the scheduler a block of time that repeats. A second-job entry gives an exact conflict that can be measured against a posted pattern. A child-care entry gives the condition that must be met before a shift is possible, which is often the most useful detail of the three.
When a stronger entry is written, date it and set a review point, since repeating limits change when a school term ends or a second job's schedule shifts. Ask the temp to confirm the entry at the first shift and whenever the assignment changes.
Common intake mistakes to avoid
Most intake problems come from a few repeated habits.
- Recording availability as yes or no. A form that accepts only yes or no cannot capture a limit with conditions, so the scheduler has to guess.
- Entering a standing limit as a one-time absence. A recurring school schedule recorded as a one-off entry is easy to lose track of after that date passes. Keep standing limits in the availability record and one-off requests in time off.
- Skipping the clock-in check. A temp can have an ideal window and still lose hours if the site has no signal and no agreed fallback.
- Treating a bridge goal as a warning sign. Note the expected length of stay as planning information, then schedule accordingly.
- Letting entries go stale. An availability entry that is never revisited after intake slowly stops matching the temp's real week, and the scheduler is the one who pays for that gap.
Related guides: Care worker background checks: 6 defined terms to read · Food worker cards: 5 checks for staffing hires · 3 pay areas to review before any worker offer.
Questions readers ask
Why should availability be collected at intake instead of after the first shift?
Catching it at first contact turns a vague promise into usable information and prevents missed shifts or rushed replacements later.
Which three availability reasons should the intake form capture?
Capture school schedules, second jobs, and child-care limits as separate facts, since each creates a different pattern. Also record full-time hour targets and the expected length of any bridge to a permanent job.
How many temps work full time, and how does that change intake questions?
Most staffing employees (73%) work full time, close to the overall workforce at 75%. Ask full-time availability as the default, then ask how many hours the temp can give and which are already spoken for.
What does the 64% bridging figure mean for scheduling?
About 64% of staffing employees work in the industry to fill the gap between jobs or to help land a job. Intake should ask about the expected length of the bridge, the kind of role sought, and any fixed start dates.
When should a temp use unavailability instead of a time-off request?
Use unavailability for repeating limits like a school schedule, a standing second job, or a child-care window. Use time off for a one-off absence on a known date.
Why does clock-in connectivity belong on the intake form?
Connecteam's mobile app requires an active connection to clock in or out, so a site with weak signal can turn a workable schedule into a missed punch. Record the clock-in method and whether the site has dependable connectivity before the first shift.