Skip forward into hiring notes
RosterAcorn

5 metric categories for a hiring scorecard you can run

A hiring scorecard you can run tracks five categories: speed, quality, cost, applicant experience, and source effectiveness. Start with seven measures across those categories, and keep only the ones that guide a decision. Lever's guide warns that a metric needing 10 minutes just to define will rarely steer a quick decision ( Lever's guide to recruitment metrics).

Sharp takeaways

  • Track five categories, running from speed through source effectiveness.
  • Start with seven metrics: time to fill, time to hire, quality of hire, hiring cost ratio, satisfaction score, source of hire, and offer acceptance rate.
  • Judge sources by the qualified candidates they produce, not by how many applicants they send.
  • Drop any metric that takes about 10 minutes to define.

Five categories and a starting set of seven metrics

Small firms rarely lack data. They lack a short list that someone will actually read. Lever's guide groups the key measures into the five categories above, which gives you a frame to build on ( Lever, "Key Recruitment Metrics"). Each category needs one or two measures, not a long list of them.

The same guide offers a practical starting set. It includes time to fill and time to hire for speed, quality of hire for quality, hiring cost ratio for cost, satisfaction score for applicant experience, and source of hire for source effectiveness. It also adds an outcome metric, offer acceptance rate, which tells you whether the offers you make are being accepted.

That gives you seven measures in total. Notice that offer acceptance rate is labeled an outcome metric, not a category of its own. It sits alongside the categories and shows the result of the other work. Keeping that distinction clear stops the scorecard from growing a new section every time someone raises a useful question.

Your scorecard also does not need to cover every number your applicant tracking system can export. Think of it as a page with a single row for each category and one measure a hiring manager can read in a few seconds. When a measure does not fit a category, leave it out until a real decision depends on it. A short page that people read beats a complete export that nobody opens.

Source effectiveness: 25 applicants beat 500

The source category asks a simple question: which channels produce applicants worth interviewing? Lever's guide answers it with a comparison that is hard to forget. A source that sends 500 applicants and produces two qualified candidates may be less valuable than one that sends 25 applicants and produces 10 qualified candidates.

MeasureSource ASource B
Applicants sent50025
Qualified candidates produced210
Value under the source metric may be less valuablemay be more valuable

The table shows why raw volume misleads. Source A looks busy on a dashboard, yet your team must read 500 applications to find two applicants worth a conversation. Source B asks far less of your reviewers and returns ten people who meet the bar.

For a small firm, reviewer time is the scarce resource. Every applicant someone must screen takes time away from interviews, offers, and follow-up. A source metric that counts qualified candidates rather than applicants shows where that time pays off. It also gives you a basis for moving budget or effort away from channels that generate noise.

To track this, record the source for each applicant, then count how many move forward as qualified. You do not need a complex model. A simple count for each source, reviewed at the same interval as the rest of the scorecard, is enough to change what you do next month. If one channel keeps producing people who advance and another keeps producing people who stall, you have your answer without any statistics.

Which one should you pick?

When the scorecard forces a choice between sources, tools, or measures, the right pick depends on your situation. These are the choices the guidance above points to for small firms.

  • If you have limited screening hours, favor the source that sends 25 applicants and yields 10 qualified candidates. It spends your reviewers' time on people likely to advance, while a source sending 500 for two wastes that time.
  • If you are setting up source tracking for the first time, make source of hire your single source measure. It is part of the starting set of seven and gives you one figure for each channel to compare.
  • If you are choosing software to support the scorecard, pick a tool that performs the specific task in front of you. Workable's hiring resources frame the goal as matching tools to tasks, while also inviting readers to look at all of the features available ( Workable, "Hiring with Workable").
  • If you are unsure whether a metric belongs on the scorecard, pick the one that would change a decision this month. A measure that cannot guide a choice adds reading time without adding direction.

The common thread is restraint. Each pick removes an option rather than adding one, which is the discipline a scorecard needs to stay usable.

Quality of hire and offer acceptance

Quality of hire is often the hardest measure to define. Lever's guide lists it among the core measures, so it belongs on your scorecard from the start ( Lever, "Key Recruitment Metrics"). Its value comes from the decision it supports: whether your process is choosing people who perform well after they start.

Because quality is hard to judge quickly, pair it with a practical outcome measure. The guide names offer acceptance rate as that outcome. It is simple to count: offers accepted divided by offers made. A falling acceptance rate tells you something has gone wrong in the process, whether that is pay, timing, the experience you give people who apply, or the role itself. A rising rate suggests the process is working.

Read the two together. Quality of hire tells you whether the people you hire are the right fit. Offer acceptance tells you whether applicants who reach the end of your process want the job. A strong quality score with weak acceptance points to a closing problem. Weak quality with strong acceptance points to screening or selection.

For the scorecard, record quality of hire on a schedule your team can sustain, such as a review at a fixed point after each start date. Record offer acceptance for every offer. Write the definition down in a sentence so the number means the same thing each time someone reads it.

Speed: time to fill and a definition test

Speed is the category managers ask about first, and it is where scorecards most often grow too heavy. The starting set separates two speed measures: time to fill and time to hire. Both belong in the speed category. Decide which one you will use before you begin tracking, or your speed numbers will quietly disagree with each other ( Lever, "Key Recruitment Metrics").

The guide also gives a practical test for any metric you consider adding. The guide's threshold is blunt: a metric that takes 10 minutes to define will rarely guide a quick decision. Apply that threshold to each proposed measure before it reaches the scorecard.

TestWhat to checkAction
Definition timeTakes 10 minutes or more to explainDrop it from the scorecard
Decision speedHelps a manager decide within one review Keep it in the speed category
RedundancyRepeats a number already on the scorecardRemove the duplicate

The table turns the guidance into a short checklist. A metric that needs a paragraph of explanation before anyone can act on it is a weak fit for a shared scorecard. Keep the speed category to one or two clear numbers that a manager can see at a glance, and run the test whenever someone proposes a new one.

Matching tools to tasks in each category

Once the scorecard is set, the next question is what software should support it. Workable's hiring resources frame the goal as matching tools to tasks, so you can discover new ways to hire better people, faster ( Workable, "Hiring with Workable"). That framing works as a filter for a small firm, because it turns tool shopping into a task list.

Start with the five categories from earlier. For speed, the task is recording when a role opens, when an applicant is first contacted, and when an offer is accepted. For quality, the task is collecting a short performance check after each start date. For cost, the task is adding up what the search actually cost. For applicant experience, the task is asking people who went through the process how it felt. For source effectiveness, the task is tagging where each applicant came from and marking which ones move forward.

Write those tasks down before you open any product page. Then ask whether a tool performs the task you need, not whether it has every feature. Workable's wording invites readers to look at "all of the features available," and that is a reason to read a features list with your task list beside it, rather than adopting everything a tool offers.

If a tool performs a task that no scorecard measure needs, leave that capability unused. If a measure has no task behind it, no tool will fix that gap. Matching works in both directions, and that keeps your scorecard and your software from growing together.

The reopen signal: 24% less likely

LinkedIn's hiring page makes a claim that small-firm recruiters should read carefully: "Those hiring with LinkedIn are 24% less likely to reopen a role within 12 months" ( LinkedIn, "Powerful Recruiting Tools"). The number points to something many scorecards ignore, which is whether a role comes back to you after you thought it was filled.

The table separates the figures in that sentence from what the sentence leaves out.

ElementWhat the quote statesWhat it leaves out
Likelihood of reopening24% less likelyThe baseline the 24% is measured against
Time windowWithin 12 months How reopenings were counted
Comparison groupThose hiring with LinkedInAny other group by name

Treat the figure as LinkedIn's claim, not a benchmark for your firm. You cannot check the comparison group from the sentence alone, so do not promise a client or a manager a specific reduction.

What you can do is measure your own reopens. When a role reopens within 12 months of a hire, log it, and compare the count across quarters. A reopen is a practical sign that a hire or an offer did not hold, which connects to quality of hire and offer acceptance. It is not a new category. It is a check on the outcomes you already track.

Why 80/20 is a principle, not a KPI

Many recruiters reach for the 80/20 rule when they want a quick story about their process: a small number of sources or steps produces most of the results. Lever's guide is careful about the status of that idea. "In recruiting, the 80/20 rule is a useful principle rather than a formal key performance indicator" ( Lever, "Key Recruitment Metrics").

That sentence sets a boundary. A principle helps you think. A key performance indicator is a number you track on a schedule, with a definition and a decision attached. Putting 80/20 on the scorecard as if it were a KPI would mean inventing a target the guide does not give you. A target you cannot define quickly fails the definition test from earlier.

So use the principle in planning. When you review source numbers, ask whether a few channels account for most of your qualified candidates. If they do, that is a reason to look harder at those channels. You do not need a percentage on the scorecard to make that point.

Keep the scorecard honest by separating the two uses. The scorecard holds measures with definitions and decisions. The principle lives in your notes, where it can shape the questions you ask next quarter without claiming a precision it does not have.

Keeping one scorecard that a manager reads

The strongest reason to keep the scorecard small is the moment a manager asks a question. Lever's guide describes that moment: a hiring manager wants to know why a role is still open, or leadership starts questioning the recruiting budget. In that moment, "pointing to a spreadsheet with 47 different data points probably isn't going to cut it" ( Lever, "Key Recruitment Metrics").

The fix is structure, not more effort. Use one page with a single row for each category and one measure for each row. The layout below fits on a single screen.

CategoryMeasure from the starting set
SpeedTime to fill or time to hire
QualityQuality of hire
CostHiring cost ratio
Applicant experienceSatisfaction score
Source effectivenessSource of hire

Offer acceptance rate sits beside these rows as the outcome check. Add a short note field only when a number has changed enough to need explaining. Review the page at a fixed interval. When a manager asks a question, answer it from the page rather than from a new spreadsheet. Over time, people learn where to look, and the questions get easier to answer.

Hiring cost ratio and satisfaction score, matched to tools

Two measures in the starting set need tools that collect them without creating extra work: hiring cost ratio and satisfaction score. The guide lists both among its core measures, alongside time to fill, time to hire, quality of hire, source of hire, and offer acceptance rate ( Lever, "Key Recruitment Metrics").

The hiring cost ratio is total search cost divided by hires. Before you start tracking, define which costs you will count, and write that definition in one sentence so next quarter's figure uses the same inputs. Consistency matters more than completeness here, because a number that changes its inputs each quarter cannot show a trend.

The satisfaction score asks people who went through your process how it felt. A short survey sent after the process ends is enough for many small firms. When you look for a tool to handle this, check it against the specific task, which here is collecting a short response from each person who applies and recording it against the role. Workable's resources frame the goal as matching tools to tasks, and discovering new ways to hire better people, faster ( Workable, "Hiring with Workable").

Keep both measures on the scorecard as single rows. Add a source breakdown for cost only if a real budget decision depends on it.

Related guides: Interview Scorecard Example for Consistent Hiring Teams · Age discrimination: 8 hiring and benefits rules · Applicant drug testing: 6 mistakes to fix before hiring.

Reader questions

Do I need all seven metrics on the first day? No. Lever's guide offers a practical starting set of seven. Begin with the measures your team can define and record, then add others only when a decision needs them ( Lever, "Key Recruitment Metrics").

What if a metric takes a long time to explain? Lever's guide warns that a metric needing 10 minutes of explanation will rarely guide a quick decision. Simplify it or drop it before it reaches the scorecard.

Is a source that sends more applicants always better? No. A source that sends 500 applicants and produces two qualified candidates may be less valuable than one that sends 25 and produces 10.

Does LinkedIn's reopen figure prove my process works? Not on its own. The claim is that those hiring with LinkedIn are 24% less likely to reopen a role within 12 months, and the sentence does not name the comparison group ( LinkedIn, "Powerful Recruiting Tools").

Should I track reopened roles myself? Yes. Logging your own reopens within 12 months of a hire gives you a figure you can check and trend, and in our view that is more useful for a small firm than a vendor benchmark ( LinkedIn, "Powerful Recruiting Tools").

Which tool should I choose first? Start with the task, not the product. Workable's hiring resources frame the goal as matching tools to tasks ( Workable, "Hiring with Workable").

Should I use every feature a tool offers? No. Workable invites you to look at all of the features available, but a feature is only worth using when it performs a task your scorecard needs ( Workable, "Hiring with Workable").

Is the 80/20 rule a target for my team? No. Lever's guide calls it a useful principle rather than a formal key performance indicator, so use it to shape questions, not as a number on the scorecard ( Lever, "Key Recruitment Metrics").

Sources