Maine employers must provide accurate records with electronic wage transfers and, for electronic records, access and printing at no cost to employees.
Key takeaways
- Check the pay period, hours, total earnings, and itemized deductions.
- Coordinate the record's release with the transfer.
- Test employee access and printing without cost.
- Compare any disputed record with the timesheet and deposit.
If you set up employee pay, the bank details are the part everyone remembers. The pay record is the part people forget, and it is the part a new employee will look for on the first payday. Maine's statute on direct deposit gives employers two duties that are easy to plan for before the first paycheck goes out. This post explains both and how to build them into onboarding. It is written for recruiters and staffing coordinators, so read it as a working guide rather than legal advice.
What does Maine law require when pay goes out by direct deposit?
Maine law requires an employer that pays by direct deposit or another electronic transfer to give each employee an accurate record of that transfer. The text appears in Title 26, §665 of the Maine Revised Statutes, which sets out the powers and duties of the commissioner and includes the record requirement.
This duty attaches to the transfer itself. It is not satisfied by the offer letter, the agreed wage rate, or the timesheet your client approved. A new hire who sees money arrive and has no record of what it covers cannot check whether it is right. The record is what lets the employee confirm the pay, and it is also what lets you answer "why is this amount different from what I expected?" without digging through three systems.
The phrase "by direct deposit or other means of electronic transfer" matters for staffing firms. If some workers are paid by check and others by direct deposit, the direct deposit group needs the record. Check which method each new hire is set up for before you send the welcome packet, because the duty follows the method.
The statute applies to the employer making payment. If your firm places a worker with a client, confirm in writing which party makes the payment and issues the record, and make sure your contract says who provides it.
What must the pay record include?
The record must include the date of the pay period, the hours, the total earnings, and the itemized deductions, and it must be provided when the transfer is made. These are the minimum items to check on every pay run.
The date of the pay period is the period the pay covers, not the date the money lands. Payroll systems often print the payment date in large type and leave the period in small type, or omit it. Look at a sample record before you rely on it. If the period is missing, the record does not show the employee what the payment is for.
The hours item needs care. The statute names hours, so the record should show the hours the pay is based on. For an hourly worker, that is usually the approved timesheet total. For other arrangements, confirm with your payroll provider how hours should appear. Do not leave the line blank because the role is salaried without checking.
Total earnings are the amount earned for the period. The employee should be able to compare that total with the deposit. If the two differ, the deductions section should explain the gap. A total with no breakdown leaves the gap unexplained.
Itemized deductions means each deduction appears on its own line with its own amount. A single line labeled "deductions" with one combined figure does not itemize anything. Taxes, benefit premiums, retirement contributions, and other withholdings should each be listed separately. New hires often have deductions they did not expect, such as a benefit election made quickly during onboarding, so a clear list also answers questions before they reach a supervisor.
Before the first real payday, run a test. Pull a sample record, read it as the new hire would, and ask whether a reasonable person could tell from the page what was paid, for what period, and what was taken out. If not, revise the record before using it.
How should an electronic pay record be delivered?
If the record is provided electronically, the employer must provide a method by which the employee may have ready access to the information and print it without cost. This is the second duty in the same statutory text. Test whether the employee can reach the record without help.
Check that the employee can get to the record on their own, without asking a coordinator to send it each time. A payroll portal, a secure link sent with each pay notice, or an account that stores past records are options to test. A pay record that exists only inside a system the employee cannot log into does not help. Before the first payday, have each new hire log in, find the record, and confirm it matches the sample you checked.
Check printing separately. The employee must have a method to print the record without cost. Test the print function from the employee's side and check that nothing in the flow asks for payment.
The ready-access and free-printing rule speaks to electronic records. If you give a new hire a paper record instead, check its contents just as carefully. Do not let a paper copy drop the period, the hours, or the deduction breakdown.
Keep a record of how each pay record was delivered, even if the system does this automatically. If an employee later says they never received one, you should be able to show where it was posted, when, and how they were given access. This is sound practice rather than a separate rule from the statute, and it takes little time to set up.
When does the record have to reach the employee?
Coordinate record release with the transfer. The timing rule in the Maine statute ties the record to the deposit rather than to a later date.
Check the first payday payment schedules separately when planning onboarding.
The simplest way to meet this is to release the record on the same day as the deposit. Payroll systems can usually do this by default. Problems start when the deposit goes to the bank on one schedule and the record is released through a separate report that runs later, or when a manual adjustment changes the deposit after the record has gone out. In both cases the record no longer matches the transfer.
Corrections need particular attention. If you fix a pay run with an extra deposit, that deposit's record should show its own period and total and say that it is a correction. Do not reuse the original record with a changed number and no explanation.
Cutoff times matter as well. If your bank's submission deadline falls before payroll finishes the run, the deposit can go out before the record that describes it. Ask your payroll provider when the file goes to the bank and when the record is released, and make sure both come from the same completed run.
Staffing firms with several clients often run pay on different calendars. Each client's deposit should have its own record. A combined record covering two clients makes it hard to show which hours and deductions belong to which transfer.
What should I do if a new hire says the record is wrong?
Check the record against the timesheet and the deposit first, then correct it with a labeled adjustment rather than editing the original.
Start by asking the new hire exactly what looks wrong. An amount complaint means comparing the total earnings line with the approved hours and the agreed rate. A deduction complaint means checking each itemized line against the benefit election or withholding form the employee signed. A period complaint means the record may be using the payroll calendar rather than the work dates, so confirm which one the employee expects.
Next, pull the original record, the timesheet, and the deposit for the same pay run and compare all three. Write down each difference, even small ones, and note which document it came from. Summaries drop the line items that matter most for itemized deductions, so work from the detailed records.
If the record is correct and the employee misread it, walk through it line by line and point out where each item appears. Send it again through the ready-access method so they keep a copy. If the record is wrong, correct it through payroll. A visible correction is easier to trust than an overwritten number.
Save a short note of what happened, what you checked, and what was fixed, with that employee's pay records. If the same issue appears for more than one new hire, fix the onboarding form or payroll setup before the next pay run rather than fixing each case alone.
Do not promise a correction date or dollar amount until payroll has confirmed both.
How do I set up a new hire so the first record works?
Set the new hire up in payroll and in the employee portal before the first pay run. A new hire whose bank details are entered late, or whose login arrives after payday, will have a deposit with no way to see the record. The sequence is: collect the information, create the employee record, confirm the login works, and only then include the person in a pay run.
Collect bank details through a secure form rather than email. Account and routing numbers are sensitive, and an email thread can be forwarded or stored. Confirm account details with the new hire through a verified channel before entering them, since a mistyped account number can misdirect the deposit. These are general data-handling practices, not requirements stated in the Maine statute.
Check that the pay schedule matches the offer. If the offer says weekly and payroll runs biweekly, the first record will show a period that surprises the employee. Read the schedule back during onboarding and show a sample record with the period, hours, total, and deductions labeled.
Give the new hire one place to find their pay record and a named role for questions. Name the role, not only a person, so the contact still works if the coordinator who onboarded them leaves. Put the login and printing steps in the same message, so the employee does not have to ask how to get a copy.
Train everyone who touches onboarding on both duties. The coordinator who enters bank details should know the first record depends on that entry, and the payroll reviewer should know the record must match the deposit it describes.
Finally, run one test. Pull a sample record for a current employee with a similar pay structure and read it as the new hire would. Check the period, hours, total, itemized deductions, and release time against the deposit. If something is off, fix the record format before the new hire starts. Use the time clock setup checks when reviewing how hours reach payroll.
Illustrative example: checking the hours
Compare the detailed records and ask payroll to correct the missing hours before release. Then check the pay period, total earnings, deductions, employee access, and printing. Matching the hours alone does not finish the review.
Today, pull a sample pay record and compare it with the timesheet and deposit. Test access and printing, then give payroll a written list of anything to fix.
Where should I check for rules beyond the statute?
Check whether any rules have been adopted under this section. Start with the statutory text as the baseline for your record format. The same section says rules affecting a class of employees and employers must be made and adopted only after notice and opportunity to be heard to those affected.
That sentence has a practical meaning. Rules can change through a process that gives affected employers a chance to comment, so do not assume a rule you read a year ago still applies unchanged. Review the current rules each year, and again when a payroll vendor changes its record format, since an update can drop a field without anyone noticing.
Who should handle other pay questions?
Payroll specialists and, where needed, employment counsel should handle questions about wage rates, overtime, worker classification, or tax treatment.
What should I write down about the record?
Write down the decisions you make about the record: which system produces it, who releases it, how hours appear for each role, and how paper copies are handled. A written decision is easy to hand to a new coordinator and easy to check when a vendor changes its format.
General information, not legal or tax advice.