Skip forward into hiring notes
RosterAcorn

Liquidated damages in good-faith pay cases: 2 outcomes

In a good-faith pay error case, a court may award no liquidated damages, or an amount up to a cap set by section 216. When a worker is paid less than they were owed, the first fix is almost always the same: calculate the difference and pay it. Sometimes the law adds a second layer on top of that back pay. This extra amount is called liquidated damages, and it is the reason a small pay error can feel much bigger than it looked on the timesheet.

This post explains the two outcomes that the federal text describes when an employer made a pay error in good faith. It also covers what staffing team leads can do now to protect their company and their workers. It is general information, not legal advice. If you have a real dispute, talk to an employment lawyer who knows the laws where you operate.

Key takeaways

  • Show what you did, when you found the problem, how you fixed it, and which rule or basis you relied on.
  • Pay what is owed quickly, and keep the record.
  • Base your good-faith case on specifics, such as a documented pay rule, an approved rate sheet, or a client's written instruction.
  • When the stakes are high, get advice from someone qualified to give it.

What liquidated damages are

Liquidated damages are an add-on amount that a court can order in some pay lawsuits. The official text of the Equal Pay Act, as published by the U.S. Equal Employment Opportunity Commission, refers to actions "to recover unpaid minimum wages, unpaid overtime compensation, or liquidated damages, under the Fair Labor Standards Act of 1938, as amended" ( EEOC, Equal Pay Act of 1963). The wording makes clear that liquidated damages are a separate category from the unpaid wages themselves.

That separation matters for team leads. A back-pay payment fixes what was owed. A lawsuit that includes liquidated damages asks for something more. Your goal, in a good-faith case, is to show that the extra amount should not be awarded at all, or should stay within a limit.

The same EEOC page sets out the two outcomes this post covers. Both depend on one idea: whether the employer acted in good faith.

Outcome one: the court may award no liquidated damages

The first outcome is the most favorable one for an employer. The federal text says that liquidated damages can be avoided if "the employer shows to the satisfaction of the court that the act or omission giving rise to such action was in good faith and that he had reasonable grounds for believing that his act or omission was not a violation" ( EEOC, Equal Pay Act of 1963).

That sentence has two parts, and both matter:

  1. Good faith. The pay error was made honestly. It was not a deliberate attempt to underpay anyone.
  2. Reasonable grounds. The employer had a sensible basis for believing the pay practice was lawful when it was used.

Notice who carries the burden. The sentence says the employer must show these things to the court's satisfaction. You cannot simply say "we didn't mean to." You need to be able to point to something that backs up your position.

For a staffing team, reasonable grounds often look like a documented pay rule, a rate sheet that was approved before the work began, or a written instruction from a client that set the rate. A mistake that came from a clearly written rule, applied the way the rule was written, is easier to explain than a mistake nobody can trace.

Outcome two: the court may set a capped amount

The second outcome is less generous, but it still limits what an employer may owe. It comes from the same provision as the first. After the good-faith test, the text says the court "may, in its sound discretion, award no liquidated damages or award any amount thereof not to exceed the amount specified in section 216 [section 16] of this title" ( EEOC, Equal Pay Act of 1963).

Read that carefully. It gives the court two choices:

  • Award nothing as liquidated damages.
  • Award some amount, but not more than the cap set by reference to section 216.

The phrase "in its sound discretion" means the judge decides, and the court is not required to award the maximum. A cap also means the amount cannot grow without limit. Even in the less favorable case, there is a ceiling.

Keep in mind that the quoted text points to section 216 for the cap. If you need to know exactly how large that cap is, read that section or ask counsel. Do not estimate it from memory, because a wrong number in a dispute can make your position worse.

Comparing the two outcomes

QuestionOutcome one: no liquidated damagesOutcome two: capped amount
What the court may awardNo liquidated damages Any amount that does not exceed the amount in section 216
Who decidesThe court, once the employer makes its showingThe court, "in its sound discretion"

Source for all rows: EEOC, Equal Pay Act of 1963.

Illustrative example of a pay shortfall

A worker should have earned $5 per hour for 3 weeks but was paid $4 per hour because of a wrong pay code. The team lead calculates the $1 per hour shortfall for each pay period, has a second person check the math, and pays the total promptly. The file holds the rate sheet, the timesheets and a dated note describing the error. That file shows a documented rule and a quick fix, the kinds of evidence the good-faith showing depends on. These figures are illustrative only.

What a good-faith record looks like

Because the employer has to show good faith and reasonable grounds, the records you keep after a pay error are as important as the correction itself. The goal is to make it easy for someone outside your team to see what happened, why it happened, and how you responded.

Start with the basics. Keep a copy of the pay rule or rate sheet that applied to the work. Keep the timesheets, shift records, or contract terms that show what was worked and at what rate. If a client supplied the rate, keep that message or contract clause. If your team set the rate, note who approved it and when. For a related guide on pay records, see Pay deduction records: 3 items to keep for each worker.

Next, write down the error itself. Describe what went wrong in plain language. A short note is enough, such as: "The overtime rule was applied to the day rate instead of the hourly rate for three weeks because the new worker was entered under the wrong pay code." Specific notes are more believable than vague ones.

Then record the fix. Note the date you found the problem, who reviewed it, what you calculated, and when the correction was paid. If you paid interest or any extra amount, record that too. A timeline with dates is the strongest form of evidence you can keep.

Finally, store everything in one place. Scattered emails and spreadsheets are hard to reconstruct later. A single folder for each pay issue, with a short summary at the top, will save hours if a question ever comes up.

Why "we didn't know" is not enough on its own

Many team leads assume that not knowing about a rule is a full defense. The provision asks whether the employer acted in good faith and had reasonable grounds for its belief. Those are two different questions, and each one needs support.

Good faith is about how you behaved. Did you act honestly once you learned about the problem? Did you correct it promptly, or did you wait?

Reasonable grounds is about what you relied on. Did you have a written rule? Did you check that rule against the work being done? Did you ask someone who should know, such as a client, a payroll provider, or a lawyer? If you relied on an informal assumption that nobody ever checked, that is harder to defend.

This is why a pay error that is caught and fixed quickly tends to look different from one that sat for months. The underlying mistake may be the same, but the record of response is not.

Steps for a team lead after a pay error

When you discover a pay error, the first hours matter. Work through the steps below in order. They are general practices, not a legal checklist.

  1. Stop the error. Fix the pay code, rate, or rule so that the same mistake does not happen again on the next pay run.
  2. Confirm the scope. Identify every worker affected, every pay period involved, and every rate that was used incorrectly. Do not guess. Pull the records.
  3. Calculate the shortfall. Work out what each worker was owed and what they received. Show your math in a simple table that someone else can check.
  4. Get a second check. Have another person review the calculation before you pay. A second look catches errors in the correction itself.
  5. Pay promptly. Once the amount is confirmed, pay it as soon as your payroll process allows. Long delays make it harder to describe the error as an honest mistake.
  6. Write it down. Save the record described in the previous section, including the timeline and the reason for each decision.
  7. Consider getting advice. If the amount is significant, if workers have raised concerns, or if you are unsure what a rule requires, speak with a qualified employment lawyer before you respond in writing.

How to talk to workers about the correction

Workers want to know three things: what went wrong, how much they will receive, and when they will be paid. Give them clear answers to those questions in plain language. Avoid jargon such as "liquidated damages" in messages to workers, because it can sound like a threat or a legal trap when it is not meant to be one.

Be honest about the error. A short, direct message works better than a long explanation. Say what happened, what you have done to fix it, and when the payment will arrive. If you do not yet know a detail, say so and promise a follow-up date that you will keep.

Be careful about asking workers to sign anything that gives up their right to be paid or to make a claim. Before you ask for a signature on a settlement or waiver, get advice on whether it is appropriate and enforceable where you operate.

Keep the good-faith case strong going forward

The best defense against liquidated damages is a pay system that rarely produces errors in the first place. Simple steps can help. Use one written source of truth for pay rates. Review new worker setups before their first pay run. Compare client-supplied rates against your own records each time a contract changes. Run a periodic audit of hours and pay codes, and record the results. For a related check, see Time clock setup: 7 gaps to fix before payroll export.

Training matters too. Team leads who enter hours or approve timesheets should know which rules apply to which type of work. When a rule changes, update the training and the rate sheet at the same time. A change that reaches the pay system but not the people entering the data is a common source of error.

Finally, build a habit of raising problems early. When a team lead sees something that looks wrong, the right response is to check it and document it, not to hope it goes away. Prompt correction is one of the most useful things you can point to when you explain your good faith.

A next step you can take today

Today, pick one open role and compare its rate on the rate sheet with the rate in your pay system. Save dated copies of both, so the record exists before any question arises.

Frequently asked questions

Does paying back wages end the matter?

Not always. Back pay fixes what was owed, while liquidated damages are a separate amount that a court may order in some pay lawsuits.

What must the employer show?

The employer must show good faith and reasonable grounds for believing its act was not a violation, to the court's satisfaction.

Where is the cap set?

The cap is set by reference to section 216, so read that section or ask counsel rather than estimating it.

For the full text of the quoted provisions, see the EEOC page on the Equal Pay Act of 1963.

Sources