Three Minnesota time rules govern your first-week onboarding events: training time counts as hours worked, on-call time counts when people cannot leave, and a break only counts if people are truly free to leave the premises.
- Training, orientation, and required event time is hours worked — pay for it, record it, and watch for overtime
- On-call time counts whenever new hires must stay close enough that they cannot use the time for their own purposes
- A break only qualifies if the employee is completely relieved of duty, free to leave the premises, and the period is definite and long enough to be useful
- Keep the agenda labeled by block type (session, break, on-call) and file it with the timesheets
- Name one person responsible for capturing start and end times at each event, and tell new hires in the invite which parts are required, optional, and paid
Why time rules shape your first-week plan
You are planning a team event for new hires. Maybe it is a welcome lunch, a training day, or a full team-building session. Before you pick a venue or send the invite, you need to know how the time counts.
Under the Minnesota rule on hours worked, three facts govern most onboarding events you will run, and other jurisdictions may set different rules. They decide when you pay, when you must record hours, and when you can call a block of time a break. Get them right, and your plan stays simple. Get them wrong, and you create overtime, disputed timesheets, or a payroll cleanup you did not budget for.
Here are the three facts you need.
Fact 1: Training time counts as hours worked
When you bring a new hire in for orientation, safety classes, or a product workshop, that time is time worked. The Minnesota Office of the Revisor of Statutes spells it out in its rule on hours worked: "Hours worked include training time, call time, cleaning time, waiting time, or any other time when the employee must be either on the premises of the employer or involved in the performance of duties in connection with his or her employment or must remain on the premises until work is prepared or available." ( Minnesota Office of the Revisor of Statutes)
What does this mean in practice? Every hour your new hire sits in a training room, watches a safety video, or completes a compliance module on site counts as hours worked. You pay for it. And it goes on the timesheet.
The rule also reaches waiting time. If your new hires arrive at 9:00 for a session that does not start until 10:15 because the facilitator is running late, that waiting period counts. If a session ends at noon and the next block does not start until 2:00 and you require them to stay, that period counts too.
Plan around this from the start. Build your event schedule with the real start and end times. Do not pad the schedule with long buffers that keep people on site without a program running. If you need a gap, make it a genuine break where people can leave (see Fact 3). And budget the hours as paid time in your staffing plan, not as a free add-on.
This fact also shapes how you communicate with new hires. Tell them up front which parts of the week are paid training, which are paid events, and which are optional. A welcome dinner that is voluntary and off-site sits differently from a mandatory safety workshop. People plan their week better when they know what they must attend and what counts as work.
A worked example for a first-week plan
Take a typical small-team onboarding week. Day one is paperwork and systems setup. Day two is a half-day of role training. Day three is a full team event at an off-site venue. Day four is shadowing. Day five is a team retro and feedback session.
Day three alone may run longer than a normal shift. If your new hires work a standard schedule and the event pushes the week over the overtime threshold, check the overtime rules with payroll or HR.
Also watch travel time. If you require new hires to meet at the office and ride together to the venue, whether that travel time counts is a question for payroll or HR. If you simply tell them the address and let them travel on their own schedule and arrive directly, the treatment may differ. Travel treatment depends on your organization's policy and local law, so have your payroll or HR contact confirm it before the day.
Fact 2: On-call time counts when people cannot leave
Some onboarding events put new hires on call. A common pattern is a day of training in the morning and an afternoon where the new hire stays reachable in case a shift opens up. Or a weekend orientation where people must remain near the site.
The Minnesota rule draws a clear line: "An employee who is required to remain on the employer's premises or so close to the premises that the employee cannot use the time effectively for the employee's own purposes is working while on call." ( Minnesota Office of the Revisor of Statutes)
Read that again with your event in mind. If your new hires must stay in the training room, the lobby, or a nearby coffee shop because you might call them back in, that is on-call time and it counts. If they must stay within a ten-minute walk, that likely counts too. The test is whether they can use the time for their own purposes.
Here is where many staffing plans go wrong. A coordinator tells new hires to hang around after a morning session "in case something comes up." Nothing comes up. Three hours pass. Those three hours are on-call time under this rule. They belong on the timesheet.
To avoid the confusion, make the structure explicit:
- Scheduled block: people are in a session, on premises, paid, recorded.
- Genuine break: people are free to leave for a definite period, long enough to use for themselves, not recorded as on-call.
- On-call block: people must stay close, paid and recorded, even if no work occurs.
Tell new hires which block they are in at each point. Put it in the welcome email and on the printed agenda. When the rules are clear before the day starts, timesheets stay clean and nobody argues about hours later.
Planning events without accidental on-call time
If you want a lighter afternoon after a heavy training morning, give people a real break instead of a soft on-call. Tell them the next session starts at a set time, that they are free to leave the premises in the meantime, and that they do not need to be reachable for work during that window. That is a break, not on-call.
If you do need them reachable, schedule it as a paid on-call block with a clear end time. Put it on the agenda. Pay it. Record it. Do not leave it as an informal expectation that shows up later on a timesheet as unpaid waiting.
For multi-day events with overnight stays, the same logic applies to scheduled evening activities. A team dinner on the agenda is a scheduled block. An open-ended evening where people must stay at the hotel in case of a call is on-call. Choose one and write it down.
Fact 3: A break only counts if people are truly free
The third fact is the flip side of the first two. Not every gap in the day is on-call, and not every gap is paid time. The Minnesota rule states: "Periods when the employee is completely relieved of duty and free to leave the premises for a definite period of time, and the period is long enough for the employee to use for the employee's own purposes, are not hours worked." ( Minnesota Office of the Revisor of Statutes)
Three conditions must hold. The employee is completely relieved of duty. The employee is free to leave the premises. The period is definite and long enough to be useful for their own purposes.
Compare that to your event schedule. A lunch break at an off-site venue, where people can eat, walk, or rest and are not expected to answer work messages, meets the test. A short gap where they must stay in the room and watch for the facilitator does not. A lunch where you run a video and call it a break does not either.
This matters for how you design a long training day. A full day with no true break wears people out and can blur into unrecorded work time. Build two or three real breaks into the agenda. Mark them clearly as breaks. Let people leave the room. Then bring them back at a set time for the next block.
Here is how the three categories compare when you plan an onboarding day:
| Time block on your agenda | Key test from the rule | Record it? |
|---|---|---|
| Training, orientation, required event | Employee on premises or on duty | Yes, as hours worked |
| On-call period, must stay close | Cannot use time for own purposes | Yes, as hours worked |
| True break, free to leave, definite period | Completely relieved and long enough to use | No, not hours worked |
Use this table as a quick check when you draft the agenda. If a block fails the test for a break, treat it as paid time and record it.
Keeping accurate records for every event
Under California's rule, recording the hours is not optional, and record-keeping duties depend on the jurisdiction. California's Department of Industrial Relations states that "It is always your employer's legal responsibility to keep accurate time records of hours worked as well as payroll records." ( California Department of Industrial Relations)
That obligation follows the hours your new hires spend at events, training, and on-call blocks. So your event plan needs a matching record plan.
Before the event, decide how time will be captured. Will new hires clock in at the door? Will the facilitator submit a roster with start and end times? Will the coordinator note on-call windows on a shared sheet? Pick one method and tell everyone what it is.
After the event, reconcile the records against the agenda. Scheduled blocks, breaks, and on-call windows should appear exactly as the agenda described them. If the agenda says a break ran from 12:00 to 1:00 and the timesheet shows a working block across that hour, find out why and correct it.
Keep the event schedule with the records. If a question comes up later about whether a period was paid, the printed agenda with clear labels answers it faster than anyone's memory.
One more habit helps: name the person responsible for time records at each event. A badge, a line on the agenda, an email signature. When someone has a question about hours during the day, they know who to ask instead of guessing.
Picking the right event to run in week one
With the time rules clear, the fun part starts: choosing what to run. The activity should fit your team size, your industry, and the time block you have available.
Indeed has a practical list of options for workplace teams. Their collection of team building activities for the workplace covers 22 options along with guidance on how to plan them ( Indeed). Use it as a starting menu, then filter each idea through the three time facts above.
A few patterns help when you plan week one:
- Short, high-energy openers: An icebreaker in the first hour sets tone without eating the day. Indeed has a set of 17 Zoom icebreakers to try with your remote team, plus 10 icebreaker questions ( Indeed). Pick one that takes 10 minutes, run it as a scheduled block, and move on.
- Half-day workshops: A deeper session on values, tools, or process fits a morning. Leave a true break after, then release people before the end of the shift if the schedule allows.
- Full-day team events: Reserve these for early in week one or the start of week two, once new hires know the faces in the room.
- Seasonal and social add-ons: Around holidays, some teams run gift exchanges or similar traditions. Indeed also has a guide to employer-led holiday gift exchanges with 15 ideas ( Indeed). Keep these optional, off the clock, and clearly labeled as voluntary so they never blur into required time.
Every idea on the list passes through the same filter. Is it on premises or off? How long does it run? Is there a true break? Who records the hours? Answer those four questions and you can shape any activity to fit your schedule and your payroll.
Matching the event to the time you have
Match event length to the slot you have on the calendar, not the other way around.
If you have 60 minutes, run an icebreaker and a short team introduction. Treat it as a scheduled block, record it, and release people on time.
If you have a half day, run a workshop with one real break in the middle. Record the working blocks. Leave the break off the timesheet.
If you have a full day off site, plan the travel, the session blocks, the breaks, and the return in that order. Confirm how your organization handles travel time before the day, since that sits outside what these rules define clearly.
Shorter blocks also make on-call windows easier to avoid. When the agenda has a clean end time and people are free to leave, nobody drifts into an accidental on-call afternoon.
A simple checklist for your next onboarding event
Run this before you send the invite:
- Agenda with labeled blocks: Every block marked as session, break, or on-call, with start and end times.
- Breaks that pass the test: Each break has a definite period, people can leave the premises, and nobody is expected to respond to work messages.
- No soft on-call: If people must stay close, it is a scheduled paid block with an end time, not a vague instruction to hang around.
- Hours budgeted: Training and event time added to the staffing plan as paid hours, with a check on whether the week tips into overtime.
- Records assigned: One named person captures start and end times for every block, and the method is stated in the welcome email.
- Agenda kept with records: The printed schedule is filed with the timesheets so questions can be answered quickly.
- Communication to new hires: The invite states which parts are required, which are optional, and which are paid.
Keep the checklist with your onboarding examples. Run it for every event, from a 10-minute icebreaker to a full off-site day. It takes a few minutes and it saves the payroll cleanup later.
Related guides: Oregon travel time pay: 4 cases on paid and unpaid hours · ATS prices by team size: 3 figures to compare · 2 California double-time triggers: long days and seventh day.
FAQ
Do optional social events count as hours worked? Make the status clear in the invite: the moment you treat attendance as expected, treat it as scheduled time and record it. The moment you make it expected, tie it to performance, or require people to stay on premises during it, treat it as scheduled time and record it. Say which it is in the invite so nobody has to guess.
What if a training session runs over the time we planned? Record what actually happened. If the session runs long and people stay on premises, those extra minutes are hours worked. Flag it to the person responsible for time records before the week closes. Revise the agenda format so the next session gets a realistic slot.
How do we handle meals during a full-day event? A meal only sits outside hours worked if people are completely relieved of duty, free to leave the premises, and the period is long enough to use for themselves. If you run a working lunch in the room, record it. If you release people to leave and eat on their own, mark it as a break with a clear return time.
Can new hires be asked to stay close after an event just in case? Yes, but treat it as on-call and pay it. If they cannot use the time for their own purposes because they must remain close, it counts as hours worked. If you want the gap to be unpaid, make it a real break and let them leave.
Who should we ask when a situation does not fit neatly? Ask your payroll or HR contact before the event, not after. The rules above cover time on premises, on-call, and breaks. Your organization's own policy on travel, meal periods, and overtime thresholds fills in the rest. Get the answer while you can still change the schedule.