For a minor on an Illinois shift, the meal break is not optional. It must last at least 30 minutes, and it must start early enough in the work period to meet a firm deadline. Delaware compensates employees for meal breaks in continuous operations, and Ohio's overtime provision does not cover agricultural employees.
Short answer for Delaware, Ohio and Illinois
The three state sources behind these rules address different subjects, so each answers a different question for a shift plan. Delaware's code provision addresses meal breaks for employees in continuous operations. Ohio's overtime section addresses which workers the overtime provision reaches. Illinois' child labor guidance addresses meal periods and daily hour limits for minors.
The first check before you place anyone is the job category. In Delaware, the question is whether the employer runs continuous operations, which the code illustrates with chemical production and research experiments, where workers must respond to urgent or out-of-the-ordinary situations ( Delaware General Assembly). In Ohio, the question is whether the worker is employed in agriculture, because the overtime section says those employees are not covered by its overtime provision ( Ohio Laws and Administrative Rules). In Illinois, the question is whether the worker is a minor, since the meal period and hour limits apply to minors.
Each check produces a different entry in the plan. A Delaware continuous-operations role carries paid meal time. An Ohio agricultural role falls outside the overtime provision. An Illinois minor's shift carries a scheduled meal period and hour caps. Record the category next to each shift line so the break and overtime treatment follow from that category, not from memory. The next section takes Delaware first, using the code's wording.
Delaware meal breaks during continuous operations
The part of the Delaware provision that affects shift plans is paragraph (4), which begins by describing the employer's operations: "The continuous nature of an employer's operations, such as chemical production or research experiments, requires employees to respond to urgent or unusual conditions at all times" ( Delaware General Assembly). The sentence ties the rule to the work itself. The examples are chemical production and research experiments, but the operative test is the duty to respond to urgent or unusual conditions at all times.
That test is what a recruiter should compare against the job duties in a posting. A role in a continuous plant or lab that requires on-call response to unusual conditions fits the description. A role where the work stops at a fixed time does not match the same wording. Read the duties, not only the employer's industry label.
The paragraph then states the consequence: "the employees are compensated for their meal break periods." For a qualifying role, the meal period is paid time. A shift plan should show that time as paid, not as an unpaid gap, and the rate on the offer should be set with that in mind.
The phrase "at all times" also matters for scheduling. The text describes employees who must be able to respond whenever something goes wrong, so a break plan should name who covers the response duty while a colleague is on a meal period. A gap in coverage during a break is a scheduling problem the text makes visible. Writing the cover name into the plan gives the team a record of how the duty was met.
Side-by-side rules for the three states
| State | Rule topic in the quoted source | Who the quoted rule covers | Requirement from the quoted text |
|---|---|---|---|
| Delaware | Meal breaks | Employees in continuous operations with a duty to respond to urgent matters | Employees are compensated for their meal break periods |
| Ohio | Overtime | Employees covered by the section, excluding those employed in agriculture | Agricultural employees are not covered by the overtime provision |
| Illinois | Meal period and daily hours | Minors | At least 30 minutes of scheduled meal time, placed within the first five consecutive hours of work |
The rows measure different things, so compare them by the decision each one drives. Delaware and Illinois both address breaks, but Delaware pays the break for a defined type of job, while Illinois sets a deadline for minors. Ohio is the only one of the three whose quoted text addresses overtime, so the overtime check belongs to Ohio plans. Delaware's source is at delcode.delaware.gov, Ohio's at codes.ohio.gov, and Illinois' at labor.illinois.gov.
The three rules also use different triggers. Delaware depends on the type of operation. Ohio's agricultural exclusion depends on the type of employment. Illinois depends on the worker's age. A single shift can involve more than one trigger, such as a minor employed in an agricultural role, so each trigger should be checked separately rather than assumed from the others. Note each one on the plan before you finalize any line.
Ohio overtime: who the rule covers
The Ohio section is tied to federal wage law. Its text includes the references "207, 213, as amended" and "sections 2 and 4 of the 'Portal to Portal Act of 1947,' 29 U.S.C." ( Ohio Laws and Administrative Rules). A planner reading the section should expect its overtime treatment to follow federal provisions by reference, not as a standalone state definition.
The section's subsection (d) defines a group by job type and pay method: "Any individual employed as an outside salesperson compensated by commissions or employed in a ... executive, administrative, or professional capacity as such terms are defined by the 'Fair Labor Standards Act of 1938'" ( Ohio Laws and Administrative Rules). Two points follow. First, the group is defined by two different things: how the person is paid, in the case of outside salespeople paid by commission, and what capacity they serve, in the case of executive, administrative, or professional employees. Second, the capacity categories take their meaning from the Fair Labor Standards Act, not from the employer's own job titles.
That second point changes how a requisition should be written. A title such as "manager" or "account executive" is a label, and the section points to the federal definitions to decide the category. For a sales or management hire, record the pay method and the duties on the requisition before you set the overtime treatment. If the pay is not commission-based, note that too, because the subsection's first category depends on it.
Ohio agricultural workers and overtime
The Ohio section contains a direct exclusion: "Any employee employed in agriculture shall not be covered by the overtime provision of this section" ( Ohio Laws and Administrative Rules). The exclusion is written around employment, meaning the activity the worker is employed in, not the worker's title or the employer's name.
Before you mark a role as excluded, confirm the activity the hire will actually perform. Ask the employer which work the person will be doing and write that answer on the shift plan. The sentence refers to "this section," so the exclusion reaches only the overtime rule in that section and no other Ohio rule. A plan can therefore treat an agricultural hire as outside that overtime rule while still applying any other requirement the team has identified.
If one hire will move between agricultural and non-agricultural tasks, the plan should show which activity each shift covers. That record shows the team why a given week was treated the way it was. Keep the record with the requisition so anyone reviewing the plan later sees the same facts the planner used. The rule turns on the employment itself, so the planning file should describe the employment itself.
Illinois meal period for minors
The Illinois Department of Labor page states the meal rule in two places, and both give the same requirement. The first version reads: "Employers must schedule a meal period of at least 30 minutes for the minor(s) no later than the 5th consecutive hour of work." The second reads: "A scheduled meal period of at least 30 minutes shall be provided no later than the 5th consecutive hour of work." Both versions appear on the Illinois Department of Labor page.
| Element | Requirement from the page |
|---|---|
| Minimum length | At least 30 minutes |
| Latest timing | Within the first five consecutive hours of work |
| Who it applies to | The minor(s) |
The word "scheduled" matters. The employer must place the meal period in the schedule, so a plan that leaves the break to be taken whenever the minor chooses does not meet the wording. Write the meal period into the shift as a set block with a start time.
Count the hours from the start of the shift. On a shift that runs past five consecutive hours, the meal period must fall within the first five hours. A plan that carries a minor past the fifth consecutive hour without a scheduled meal period has missed the deadline, even if the minor eats during a short break. The rule applies to each minor on the shift, so a shift with two minors needs a meal period for each of them.
Illinois limits on minors' hours during school weeks
The Illinois page gives daily and total hour figures for school days: "More than 3 hours per day or more than 8 hours total of work and school hours on days when school is in session" ( Illinois Department of Labor). The quoted text counts work and school hours together, so a shift plan cannot look only at the shift. For each minor on a school day, compare the 3-hour daily figure with the scheduled work hours and the 8-hour total figure with work and school hours combined, since the quote counts those together and does not say whether the 3-hour figure includes school hours.
The quote does not explain how school hours are measured, so keep each minor's school schedule on file with the shift plan. Mark each day as a school day or a non-school day before you check hours, since the figures apply only to school days. A planner who skips that marking may check a non-school day against school-day figures, or the reverse.
Illinois hours for minors when school is out
On days when school is not in session, the page gives a time window instead of an hours total: "From 7am to 10pm when school is not in session" ( Illinois Department of Labor). The check here is about clock times. Both the start and the end of the shift need to fall inside the window.
A shift that starts at 6pm and runs past 10pm does not fit the window, even if its total length is only a few hours. A shift that starts at 7am and ends before 10pm sits inside the window. Write the actual start and end times on the plan rather than the shift length alone, since the length does not show whether the shift is in the window.
The quoted window covers non-school days only. The school-day figures are the 3-hour daily and 8-hour total figures in the previous section, and the page's text quoted here does not give a clock window for school days. Keep the two checks separate on the plan, one for school days and one for non-school days.
Which one should you pick?
The three rules are set out in three state sources, so the first check is the job category the hire falls into, and the state where the shift is worked comes second. The second choice is the category the hire falls into. The table below pairs each category with the check to run first and the source that governs it.
| If the hire is... | Check first | Quoted source |
|---|---|---|
| In a continuous operation with a duty to respond to urgent or out-of-the-ordinary matters, in Delaware | Whether meal break periods are compensated | Delaware General Assembly |
| Employed in agriculture, in Ohio | Whether the agricultural exclusion from the overtime provision applies | Ohio Laws and Administrative Rules |
| A minor, in Illinois | Meal period timing and the hour limits | Illinois Department of Labor |
The Ohio row needs one caution. The quoted exclusion reaches only the overtime rule in that section, so an agricultural hire is outside that rule but not necessarily outside every other requirement. For a hire who fits no row, none of these three rules settles the plan, and the planner needs the rule that does apply.
Meal and hour checks for minors in Illinois shift plans
Every minor's shift needs a meal period check. Shifts on non-school days also need a clock-window check, and shifts on school days need an hours check. The page sets them out as follows.
| Check | Requirement from the page |
|---|---|
| Meal period | Illinois Department of Labor: at least 30 minutes, scheduled within the first five consecutive hours of work |
| Clock window on non-school days | Illinois Department of Labor: from 7am to 10pm |
Take a non-school day with a 7am start and a 9pm finish. The shift fits the window. Counting from the 7am start, the fifth consecutive hour of work ends at noon, so the scheduled meal period should begin by then. The meal block belongs on the plan with a start time, not as a note that the minor may take a break when convenient. Repeat the meal check for each minor, since the rule applies to the minor(s) on the shift.
Week-by-week scheduling checks for Illinois minors
A weekly check sheet can hold the Illinois checks in one place. Use one row per day, with columns for school day or not, scheduled start, scheduled end, school hours, meal period start, and the result of each check. For a school day, the row shows whether work hours stay within the page's 3-hour daily figure and whether work plus school hours stay within the 8-hour total figure ( Illinois Department of Labor). For a non-school day, the row shows whether the shift sits within 7am to 10pm.
Every row needs a meal entry. The Illinois Department of Labor page says: "Employers must schedule a meal period of at least 30 minutes for the minor(s) no later than the 5th consecutive hour of work." A row for a shift that runs past five consecutive hours needs a meal start time. Leave a row blank only if the minor is not scheduled that day.
Review the sheet before it is published, and again when a shift moves. A moved start time can push a school-day total over the figure or a non-school-day shift past 10pm, so each change needs the same row checks as the original plan.
Building a record for each hire
The quoted sources decide the rules, but the planning file is where your team shows how it applied them. For each hire, keep one file that holds the state where the work is performed, the job category, the pay method, and the duties written in plain language. For a Delaware continuous-operations role, the duties should show the response requirement the code describes. For an Ohio hire, the file should show the activity performed and, for sales or management roles, the pay method. For an Illinois minor, the file should show the school schedule, the age the team has on record, and the scheduled meal periods.
The quotes do not say how an employer should verify a worker's age or how school hours must be documented, so those are internal decisions. Choose a method, write it into your process, and apply it the same way to every hire. A consistent method is easier to defend than notes that vary from one recruiter to the next.
Store the file with the requisition and the shift sheet, and give the client a copy of the parts that affect pay and hours. When a hire's duties change, add a dated entry to the file explaining what changed and which rule the change affects. A dated entry lets a reviewer see why a shift was treated one way in March and another way in June.
Reviewing the plan before it goes live
Before a plan is published, read each hire's file against the matching section above. For Delaware, confirm the job duties match the code's description of continuous operations and that the meal time is marked as paid. For Ohio, confirm the agricultural determination and the pay-method details for any sales or management role. For Illinois, confirm each minor's meal block, each school-day total, and each non-school-day window.
Ask the employer to confirm the duties in writing. A short email that describes the work helps show the planning basis, and it gives you a reference if the schedule is questioned later. If the employer's answer is unclear, do not guess. Hold the shift until the duties are confirmed, because a wrong category can change the break and overtime treatment for every shift that follows.
Finally, look at the plan as a whole. A hire who works mostly under one rule may still move into another category during a busy season, and a minor's school schedule can change mid-year. Set a date to review each file, and review it sooner whenever a shift, a job duty, or a school schedule changes.
Where to read the full sources
The quotes in this article are excerpts. Each one comes from a specific page, and the full section may contain related language that affects how the excerpt applies. Before you set a rule in a plan, open the linked page and read the surrounding text, including any definitions or cross-references the section uses. The Ohio section, for example, refers to federal law by name and number, and those references are part of the rule. The Illinois page gives the meal rule and the hour figures in separate places, so read the whole page rather than one passage.
This article explains how the quoted rules can be applied in shift planning. It is planning guidance, not legal advice, so check any unusual case with the employer's counsel or the relevant state agency before you finalize the plan.
Related guides: Break and meal pay: 3 sources to read before a shift offer · Meal break rules in 4 states for shift handoffs · State overtime rules from 4 pages before the offer.