Why these three figures belong in the offer
The figures that most often cause trouble in a job offer are the starting pay, any benefit contribution, and the dates on which pay arrives. A person who can find all of them in one read can decide with confidence. A person who has to guess may say yes before the gaps come up. A job offer is the document a person reads most closely, so vague terms there cost more than vague terms anywhere else. Small staffing teams and hiring managers run into this most often when an offer is drafted quickly, sometimes by someone who is not sure which rule applies.
Applicants also read the offer as a signal about the employer. Clear terms suggest a well-run place to work. Vague ones invite the question of what else has not been spelled out, and that impression matters most at the moment the reader decides whether to accept.
This post covers three things that come up when drafting offers: a learner rate set as a share of the minimum wage, a $2,500 employer contribution to a Trump account, and how a pay schedule is described. Each has an official source behind it, and each has limits. This post tries to name them.
This is general information, not legal advice. The sources below describe rules for particular places, industries and situations. Your state, your industry and your company's own policies can change what applies to you. Where a rule comes from one state or one industry, the post says so, and you should confirm it applies to your role before you use it.
Write the terms in plain words. A reader should be able to find the rate, the benefit and the first pay date in one read, without having to guess what a phrase means. Most of the rest of this post is about getting those three things right.
Learner pay in the first 160 hours
Some pay rules for new workers are set as a percentage of the minimum wage instead of as a flat hourly figure. The clearest example comes from California's rules for the motion picture industry, in California Code of Regulations, Title 8, Section 11120, which reads: "LEARNERS: Employees, during their first 160 hours of employment in occupations in which they have no previous similar or related experience, may be paid not less than 85 percent of the minimum wage rounded to the nearest nickel."
| Element | Rule detail |
|---|---|
| Covered group | Employees during their first 160 hours of employment |
| Experience test | Occupations in which they have no previous similar or related experience |
| Rate floor | 85 percent of the minimum wage, rounded to the nearest nickel |
| Industry scope | California's motion picture industry order |
It helps to take that sentence apart, because each piece changes what you can put in the offer.
- Who it covers. Learners, meaning employees during their first 160 hours of employment.
- The experience test. The rule reaches only work the employee is new to. Compare the person's background with the wording above before you apply it.
- How the rate is set. As a floor expressed as a share of the minimum wage, rounded to the nearest nickel.
- Which industry. The order is titled for the motion picture industry, so it is the rule for that industry in California.
The rule sets the lowest the learner rate may go. It does not require an employer to use a learner rate at all. It also does not say the rate applies outside the industry or state it covers. If your role falls outside that order, the 85% figure may not apply to you, and your state or local area may have its own rules about trainee or learner pay. Decide which rule governs your job before you write a number into an offer.
Recruiters sometimes ask whether the learner rate can be offered to someone with experience in a neighboring field. The honest answer depends on the rule's wording. If that person's experience is similar or related to the job, the reduced rate may not fit. If it is clearly different, the question is more open. When in doubt, write the offer around the standard rate and treat any learner arrangement as a separate decision.
When the learner rule does apply, the offer should show the following:
- The learner rate as an exact hourly figure, not as a phrase such as "reduced trainee pay."
- The period the learner rate covers, which the rule sets as the first 160 hours of employment.
- The rate that takes over after that period, so the person knows when the change happens.
- A short note on the experience condition, so the person understands why the reduced rate applies to them.
A workable line might read: "For the first 160 hours of employment, your hourly rate is [learner rate]. After that period, your rate changes to [standard rate] on the date we confirm in writing." Replace the brackets with the figures your company has set, and keep the sentence in the same place in the offer as the rest of the pay terms.
To work out the learner figure, start with the minimum wage in effect on the day you write the offer. Take 85% of that figure and round to the nearest nickel. Do the arithmetic from the current minimum wage, not from a number you remember from last year. A rounding error is easy to make and awkward to fix after the offer has been accepted, so it belongs in the final read described later in this post.
A common mistake is to write a learner offer that sounds generous but leaves out the transition. A person who reads "starting pay: learner rate" with no end date may assume the reduced rate lasts longer than it does. State both ends of the period so the person can plan around them.
If a review or pay change is scheduled before the period ends, say so in the offer too. A person should not have to wonder whether an early review could move them out of the learner rate, or whether it could be delayed. The learner rate ends at 160 hours, and any earlier or later change must stay consistent with that period. Not knowing is the problem.
Pay periods and pay dates
The second figure is the pay schedule. Offers often say "paid biweekly" or "paid on the 15th and last day of the month" and stop there. That may be enough for some applicants, but it leaves gaps that can cause confusion when the first paycheck arrives later or smaller than expected. Official rules give a useful way to describe the schedule precisely.
| Schedule type | Period and pay day |
|---|---|
| Monthly | Period starts on the 1st; pay day is the last day of the month |
| Semi-monthly, first half | Work from the 1st to the 15th is paid on the 25th |
| Semi-monthly, second half | Work from the 16th is paid on the 10th of the following month |
| Allowed period types | Daily, weekly, bi-weekly, semi-monthly or monthly |
Washington's rule on pay periods, in WAC 296-126-023, says that "[a] pay period may be daily, weekly, bi-weekly, semi-monthly or monthly." That list gives you the vocabulary. Pick one term and use it the same way throughout the offer. Do not write "biweekly" in one paragraph and "every two weeks" in another, because a reader may think they describe two different schedules.
The same section includes two worked examples. The first is a monthly schedule: an employer "establishes a monthly pay period starting on the 1st day of each month with an established pay day on the last day of the month." The second is a semi-monthly schedule with two pay periods in each month: "The first pay period covers work performed from the 1st day of the month to the 15th day of the month with the pay day of the 25th; the second pay period covers the 16th day of the month with the pay day of the 10th of the following month."
The table below sets the pay-schedule rules and examples side by side, along with the learner and benefit figures. Use it as a quick reference, not as a substitute for reading the sources.
| Term | Rule in brief |
|---|---|
| Learner pay | In California's motion picture industry order, a floor of 85% of the minimum wage rounded to the nearest nickel, for the first 160 hours in occupations with no previous similar or related experience |
| Pay period types | Daily, weekly, bi-weekly, semi-monthly or monthly |
| Monthly example | Period starts on the 1st; pay day is the last day of the month |
| Semi-monthly example | Work from the 1st to the 15th is paid on the 25th; work from the 16th is paid on the 10th of the following month |
| Employer benefit contribution | Ceiling of $2,500 a year, beginning July 4, 2026 |
| Annual contribution limit | $5,000, other than exempt contributions |
The same rules also say something about how the money arrives. Employers "that pay employees by direct deposit or other electronic means shall ensure that such wage payments are made and available to employees on the established pay day." That sentence applies only to employers covered by that rule, so it is not a general requirement. It is still a good model for any offer. If pay goes by direct deposit, say so, and state that the money is made and available on the pay day.
When you write the pay-date term, include these details:
- The pay period type, using one of the terms above.
- The start and end of each pay period, in plain dates or day numbers.
- The pay day for each period, including whether it falls before or after the period ends.
- The method of payment, such as direct deposit or check.
- What happens when a pay day lands on a weekend or holiday. Your company's policy should answer this, and the offer should point to it.
A semi-monthly schedule is where the details matter most. In the example above, the pay day for the first half of the month falls on the 25th, while the pay day for the second half falls on the 10th of the next month. A person who reads "paid on the 15th and last day" might assume each pay day matches the end of its period. Writing out each pay day removes that guesswork. The pay period and the pay day are two separate dates, and an offer should show both.
Schedules sometimes change. If your company may move a person to a different schedule or change the pay day, the offer should say how they will be told and how far in advance. Otherwise a schedule that worked on paper can surprise someone in their first month.
The $2,500 employer contribution
The third figure is a benefit: an employer contribution to a Trump account. The key sentence for an offer comes from IRS Publication 15-A (2026), which describes the benefit in detail: "Beginning July 4, 2026, employers may contribute up to $2,500 a year, which will be indexed for inflation after tax year 2027, toward the $5,000 contribution limit to the Trump account of an employee or of a dependent of an employee, and the amount will be excluded from the gross income of the employee if paid pursuant to a Trump account contribution program."
| Figure | What the source states |
|---|---|
| Employer contribution | Up to $2,500 a year, beginning July 4, 2026 |
| Account contribution limit | $5,000, other than exempt contributions |
| Indexing | Indexed for inflation after tax year 2027 |
| Covered accounts | Employee or a dependent of an employee |
Read that sentence carefully before you put a number in an offer. Several parts matter.
- The verb is "may." The rule says employers may contribute. It does not say they must. If your company offers the contribution, the offer should say that it is an employer decision, and it should state the amount your company has chosen.
- The $2,500 figure is a ceiling. It is the most an employer may contribute under the rule. An offer that promises $2,500 is making a specific promise. An offer that only recites the rule describes a limit, and you still have to say what your company will do.
- The start date is July 4, 2026. The contribution is available beginning that date. An offer that starts before then, or that describes the contribution as available in an earlier period, makes a claim the source does not support.
- The contribution counts toward a limit. The $5,000 figure is the account's annual limit, and the source qualifies it with the words "other than exempt contributions." That qualifier means the figure is not the whole story, so keep the offer's description simple and leave the full rule to the source.
- It can reach a dependent. The sentence covers contributions to the account of an employee or of a dependent of an employee. Do not describe the benefit as going only to the employee unless your company's program says so.
- The tax treatment depends on the program. The amount is excluded from the employee's gross income "if paid pursuant to a Trump account contribution program." If your company is not running a program that meets that description, the tax treatment in the source may not apply.
The publication also points readers to a fuller discussion: "For more information, see Employer Contributions to Trump Accounts in section 5." If you are writing an offer that includes this benefit, read that section before you finalize the wording. It is the right place to confirm how your company should describe the contribution to a new hire.
A useful offer sentence for this benefit states four things: that the company offers the contribution, the amount it has decided to pay, that it is paid toward a Trump account, and that the tax treatment depends on the company's program. For example: "Your offer includes an employer contribution of [amount] a year toward a Trump account, available beginning July 4, 2026. How it is treated for tax purposes depends on the program the company runs." Keep the claim no bigger than the decision your company has made. If the amount may change, say so, and say when it will be confirmed.
Do not turn the contribution into a promise of future increases. The indexing language in the quoted sentence describes how the cap moves under the rule. It says nothing about how your company's contribution will move. Write an indexed or increasing figure only if your company has committed to one in writing.
Putting the terms in the offer
Once you know the learner rule, the pay schedule and the benefit, the offer needs to present them together. A good structure is to group the three figures under their own headings, so the reader can find each one quickly.
A simple layout could look like this:
- Pay rate. The exact hourly rate, and for a learner, the learner rate, the period it covers and the standard rate that follows.
- Pay schedule. The pay period type, the period dates, the pay days, and the payment method.
- Benefit. The employer contribution, the amount your company has decided on, the account it goes to, and the note on how the tax treatment depends on the program.
Use the same terms the sources use. If you say "pay period" in the schedule section, do not call it "pay cycle" elsewhere. If you say "learner rate," do not call it "trainee rate" in another place. Consistent terms make the offer easier to read and harder to misunderstand.
Use one form for each figure as well. "$2,500 a year" should not turn into "$2,500 annually" halfway down the page, and "85%" should not appear as "85 percent" in another section. Small variations look careless, and a reader may wonder whether they signal different terms.
If more than one person works on the offer, agree on who owns each of the three figures. The person who calculates the learner rate is not always the person who sets the benefit, and an offer that passes through several hands can end up with a figure no one has looked at closely. Name an owner for each line.
Put every term in the written offer itself, not in a phone call or a summary email. A person who reads the terms in the document they are signing has one place to look, and so do you if a question comes up later.
Avoid burying the figures. A long offer can hide the pay rate in the middle of a paragraph about company culture. Put the three figures near the top, with clear labels, and move the background to later in the document.
Checking the draft before it goes out
Before you send an offer, read it once against the sources. This is the step most likely to catch a mistake, and it takes only a few minutes.
Start with the learner rate. Confirm that the role falls under the rule that covers learners, that the person's background meets the experience test, and that the period is 160 hours from the start of employment. Recalculate the figure from the current minimum wage and confirm it is rounded to the nearest nickel.
Next, check the pay schedule. Confirm that the period type is one of the terms in the source, that the period dates line up, and that each pay day is written out. If you use direct deposit, confirm the offer says the money is made available on the pay day, and that your payroll process can meet that promise.
Then check the benefit. Confirm that the amount does not exceed the $2,500 yearly ceiling, that the offer does not claim the contribution starts before July 4, 2026, and that the wording matches the decision your company has made. If the offer includes a dependent, confirm that your company's program covers it.
Finally, read the whole offer as the person receiving it would. Look for any figure that could be read two ways, any term that is undefined, and any date that is missing. Fix those before you send anything.
Keep a dated copy of the sources you used, with the date you looked at them. Rules change, and a record of what you relied on at the time protects you and the person who accepted the offer if a question comes up later. Look at the sources again before each new offer, because the pages linked here may be updated after this post was written.
A careful offer is not complicated. It gives the rate, the schedule and the benefit in plain words, uses the rules that actually apply to the job, and makes no promise the company has not decided to keep. That is what this post has tried to show, using the official sources as the reference for each figure.
Related guides
- Interview Scorecard Example for Consistent Hiring Teams
- Hiring Decision Debrief: Notes to a Recorded Decision
- Conviction timing rules for 3 jurisdictions