Skip forward into hiring notes
RosterAcorn

4 daily hour benchmarks in California and Wisconsin

What these two states actually say about daily hours

California requires double time over 12 hours a day and Wisconsin sets a day's work at 8 hours in manufacturing or mechanical business.

Key takeaways

  • The 10-hour California alternative day needs a written agreement, a secret ballot, and a two-thirds vote before the work is performed.
  • Double time applies over 12 hours in a day and over 8 hours on days beyond the scheduled workdays.
  • New hours under an adopted schedule cannot be required for at least 30 days after the announcement of final election results.
  • Wisconsin's 8-hour day is a contract construction default that an express contract term can override.

This post walks through four concrete daily hour benchmarks — the 10-hour alternative day, the 12-hour double-time trigger, the 30-day schedule-change floor, and Wisconsin's 8-hour day — and tells you exactly where each one bites. Every rule here is tied to its source page. Nothing here is general employment law advice; check your own counsel when a worker's classification or contract is unclear.

California's 10-hour alternative day for on-site trades

A California alternative workweek schedule under this rule lets affected employees work up to 10 hours a day inside a 40-hour workweek without overtime, as long as the schedule was properly adopted. The California Department of Industrial Relations rule, Title 8 Section 11160 states plainly that the schedule "shall provide for work by the affected employees of no longer than ten (10) hours per day within a 40-hour workweek."

Where this bites you: if you run a construction, drilling, logging or mining site and you promise a 10-hour day in an offer letter, you need the alternative workweek agreement in place. A written agreement proposed by the employer, adopted in a secret ballot by at least a two-thirds vote of affected employees before the work is performed, is what makes the 10-hour day legal under this section. That election has to happen before you schedule the work, not after.

Practical detail you can use when writing the offer: the schedule must be in writing. It must be proposed by the employer who controls wages, hours and working conditions of the affected employees. It must be adopted in a secret ballot election held before the performance of work. The vote must be at least two-thirds of the affected employees in the work unit. Miss any one of those and the 10-hour day doesn't stand.

Watch out for public works: an alternative workweek requiring more than 8 hours a day cannot be used on a public works contract in violation of Labor Code §§ 1810-1815. If your roster covers a public works job, confirm with your counsel that the alternative schedule doesn't cross that line before you publish it.

California's 12-hour double-time trigger

The second California benchmark is the double-time trigger. Under the same Title 8 Section 11160, an overtime rate of not less than double the employee's regular rate applies for any work over 12 hours in a day, and for any work over 8 hours on days worked beyond the regularly scheduled workdays the alternative workweek agreement established.

What this means when you set shift lengths: if your alternative workweek says four 10-hour days, the fifth day worked is beyond the scheduled workdays. On that fifth day, hours 9 through 10 are paid at not less than double the regular rate, because they are work over 8 hours on a day beyond the scheduled workdays. And any day where someone crosses 12 hours pays double time regardless of what the agreement says about normal days.

Worked example: weekend push on a 4x10 schedule

A crew on a 4x10 schedule gets asked to come in Saturday. Saturday is a day beyond the regularly scheduled workdays, so the day splits into two tiers: hours 1 through 8 are straight time, and hours past 8 — including hours 9 and 10 — are paid at not less than double the regular rate. On any day, hours past 12 are also double time. When you model payroll for a weekend push, run those two tiers, then check the 12-hour line separately.

How this affects offers: writing "10-hour days, occasional Saturday" without flagging the Saturday double-time math will create a surprise on the first payroll run.

The 30-day floor after you change schedule hours

California's rule protects workers after you change the schedule. Employees affected by a change in work hours from adopting an alternative workweek schedule shall not be required to work those new hours for at least 30 days after the announcement of the final results of the election.

Why this matters to your hiring timeline: if you're hiring a crew under an alternative schedule, the election has to happen first, results have to be announced, and then a 30-day window runs before anyone can be required to work the new hours. Build that into your date math.

How to sequence it: run the secret ballot before any work under the new schedule begins. Announce the final results. Wait out the 30 days. Only then require the new hours. Putting "starts Monday under the new 4x10" in an offer without those steps creates a commitment you can't actually enforce yet.

You don't have to spell the mechanics; you do have to make sure your start date respects the sequence.

Quick reference: the four daily hour benchmarks

Here's the four benchmarks side by side so you can scan them before writing your next schedule.

BenchmarkStateApplies toEffect
10 hours/day within 40-hour workweekCaliforniaAlternative workweek for certain on-site construction, drilling, logging, mining occupations No overtime within that day, if the schedule is validly adopted
12 hours/dayCaliforniaSame on-site occupations on an alternative workweek Double time above 12 hours in a day, and above 8 hours on days beyond the scheduled workdays
30 daysCalifornia Employees affected by a change in hours after election resultsNew hours cannot be required until 30 days after announcement of final results
8 hours/day WisconsinManufacturing or mechanical business, absent an express contract to the contraryA day's work is 8 hours; contracts construed that way

Wisconsin's 8-hour day default in manufacturing and mechanical work

Wisconsin runs on a different logic. The statute does not set an overtime rate in these quotes; it sets what a "day's work" means. Under Wisconsin Statutes 103.36, for engagements to labor in manufacturing or mechanical business with no express contract to the contrary, "a day's work shall consist of 8 hours and all engagements or contracts for labor in a manufacturing or mechanical business shall be so construed."

Plain version: if you hire someone in a Wisconsin manufacturing or mechanical business and your contract doesn't say otherwise, their day reads as 8 hours. The construction of the contract follows that default.

How to write the offer: if you want a different day length in Wisconsin manufacturing or mechanical work, say so expressly in the contract. Silence hands you the 8-hour default.

The contract-term carve-out: the related provision at Wisconsin Statutes 103.38 notes that its subsection (1) "does not apply to any contract for labor by the week, month or year." So how you structure the term of engagement changes which provisions apply. A weekly, monthly or yearly contract sits outside that subsection's reach.

What this doesn't tell you: the quotes don't state what happens above 8 hours in Wisconsin under this default — the overtime question is simply not in these pages. If your roster runs long days in Wisconsin manufacturing or mechanical work, ask your employment counsel what applies to your specific setup.

Writing shift lengths into offers for these states

You have two different drafting problems. In California, you're documenting a validly adopted alternative schedule and its boundaries. In Wisconsin, you're either accepting the 8-hour construction or writing around it.

For California on-site trades: state the daily hours, the workweek, and that the schedule follows an alternative workweek agreement adopted by secret ballot before the work starts. State that the 30-day window runs from announcement of election results before new hours are required. Note that days beyond the scheduled pattern and hours past 12 in a day carry different rates than the standard day.

For Wisconsin manufacturing and mechanical work: if your day is 8 hours, you can say it plainly — it matches the default construction. If your day is something else, write it expressly. The default only yields where the contract speaks.

For either state: put the daily hours and the workweek in the same sentence of the offer. For the offer-letter pay terms you need to spell out for state rules, see Offer letter pay terms: 8 to spell out for state rules.

Setting the roster once the offer is signed

Offers create expectations; rosters test them. A few checkpoints keep the two aligned.

Before the first schedule goes out: confirm the California alternative workweek agreement is executed and the election is held if you're using the 10-hour day. Confirm the 30-day period has run if you've announced results and you're now requiring new hours. Confirm any Wisconsin contract with a non-8-hour day says so expressly.

When someone asks for overtime: check the day length first. Under the California rule, past 12 hours in a day is double time, and past 8 hours on a day beyond the scheduled workdays is overtime at not less than double the regular rate. Under Wisconsin's default reading, a day's work is 8 hours in manufacturing or mechanical business absent an express contract — which doesn't itself set an overtime rate in these quotes.

When you change hours mid-engagement: the 30-day floor applies to employees affected by a change in work hours resulting from adopting an alternative workweek schedule. Sequence your announcement and your new roster so the waiting period is honored.

When the job is public works in California: an alternative workweek requiring more than 8 hours a day can't be used on a public works contract in violation of Labor Code §§ 1810-1815. Check that constraint before you lock the roster.

Do this today

Open your next offer for an on-site trade in California and put the daily hours and the workweek in the same sentence, then add one line stating that the schedule follows an alternative workweek agreement adopted by secret ballot before the work starts.

Questions recruiters ask most

Does the 10-hour California day apply to every employer? No. It applies to alternative workweek schedules under the Title 8 Section 11160 rule, which covers certain on-site occupations in construction, drilling, logging and mining. It requires a written agreement proposed by the employer and adopted by at least a two-thirds secret ballot vote of affected employees before the work is performed.

What happens if we announce a new schedule and start people on it next Monday? The rule requires that employees affected by a change in work hours from adopting an alternative workweek schedule not be required to work the new hours for at least 30 days after announcement of the final results of the election. Monday start would skip that window.

Can a Wisconsin manufacturing shop set a 10-hour day in the offer? The Wisconsin default construction gives a day's work of 8 hours in manufacturing or mechanical business when there is no express contract to the contrary. An express contract term can speak to a different arrangement — the quotes don't say what overtime applies above 8 hours, so ask your employment counsel about your specific setup.

Does the weekly, monthly or yearly contract carve-out help in California? That carve-out appears in the Wisconsin statute, not in the California rule. Under the California alternative workweek rule, the schedule, election, two-thirds vote and 30-day floor are what govern.

What if we run a mixed California roster — some office, some on-site trade? Title 8 Section 11160 covers certain on-site occupations in construction, drilling, logging and mining industries. Which employees fall inside that coverage is a classification question for your counsel, not something these quotes answer.

General information, not legal or tax advice.

Sources