Skip forward into hiring notes
RosterAcorn

Background check turnaround times: 3 hiring ranges

Background check turnaround time depends on the type of check, so one average will not cover every item in a hiring file.

Key takeaways

  • Write an expected range for each check type in the offer file.
  • Confirm whether a driving record check will need physical copies before planning the start date.
  • Give the county criminal search its own line, separate from the driving record check.
  • Plan state and county searches on their own lines wherever your hiring needs them.
  • Check the state's own rules before applying DC conviction-inquiry timing elsewhere.

Why check timing sets your start date

A start date built on one blended average hides the fact that each check runs on its own timing. According to Goodhire, a background check "can take a few minutes or several days or more to complete," depending on the type of background check, the information requested, and the data sources. A single number cannot describe that whole spread, so each check type needs its own planning figure.

Knowing the timing also supports communication with applicants. According to Goodhire, understanding how long results take can help you manage hiring and provide status updates to applicants.

The driving record figure comes from Checkr, the county and international figures both come from Goodhire, and the conviction-inquiry rule comes from the DC Council. Each row below uses the timing wording from that publisher's own page.

PublisherCheckTiming wording from the source
CheckrDriving record checkaverage less than an hour online, but can take 1-3 business days when physical copies are needed
GoodhireManual portion of a county criminal searchcan take between 3 to 30 days to complete, depending on the county or case
Goodhire International checkusually take four to five days depending on cooperation with the country; some countries can take up to 20 days to complete

Read each row as its own timing question, because the rows describe different kinds of check. Keep the rows separate when you talk about dates, so an applicant or hiring manager can see which item drives which part of the schedule.

The DC conviction-inquiry rule concerns when an employer may ask a question, rather than how long a check takes.

Driving record checks: under an hour to 1-3 business days

Checkr's page separates two cases for a driving record check. According to Checkr, the online case averages less than an hour, while the physical-copy case can take 1-3 business days. A single line that describes the check as quick hides the longer case.

Planning from the online average alone leaves the physical-copy case out of the start date. Before fixing a start date, confirm whether the applicant's driving record will come through online or will need physical copies. If physical copies might be needed, plan with the 1-3 business day figure rather than the online average.

In the offer file, write both cases side by side. Note which case you expect, and record the date you confirmed it. That note shows the hiring manager why the start date moved if the record type turns out to differ from what was expected.

If the applicant's record needs physical copies, the range is not a fixed wait. Keep the whole range in the file, so the date is not read as a single promised day.

County criminal searches: 3 to 30 days

According to Goodhire, the spread for a county criminal search depends on the county or case. The figure covers the manual portion of the search, so the range does not describe the whole check. Ask whether any other part of the same check is still running when you set the date, and write that answer in the file.

A range this wide calls for a fallback date that still works if the search lands near the top of the range. Choose the fallback before the offer goes out, so the decision is not made under pressure later.

According to Goodhire, the top of the manual-portion range is 30 days; the full check can take longer than that portion alone.

When an applicant has records in more than one county, list each county as its own timing question rather than assigning one estimate to the whole search. Ask the screening provider to confirm which counties are in scope before you set the date. Keep the county line in the file so the reviewer can tell which county each estimate covers.

Where your process allows, request the county search early, so the wait overlaps with other work in the hiring file.

International checks: four to five days, up to 20

According to Goodhire, these checks "usually take four to five days depending on cooperation with the country." Use that figure as a starting point for planning, not as a promise for every applicant.

The longer figure matters for applicants with foreign history. According to Goodhire, some countries have extensive privacy protection laws and can take up to 20 days to complete a check. Do not assume the four to five day figure applies to every country in an applicant's history.

Write the international line only when the hiring plan includes an international check, so the timeline does not carry a figure for a check that is not running. Record both the usual range and the longer case in that line, so the full spread is visible to anyone who reads the file.

Ask the screening provider which countries are in scope before you set the start date. Keep the international check in its own timing row, separate from the domestic checks, so a long international result does not get mixed into a domestic estimate. If the international result runs past the planned date, record the reason in the file, so the delay is traced to the check itself.

Illustrative example: planning a longer wait

In an illustrative hiring file, allow 30 days for the manual county search and 20 days for an international check. Keep these on separate lines rather than adding them into a promised start date. Ask which other parts of the checks are still running before confirming the date.

Federal-only results miss state and county records

According to Goodhire, a federal background check "only searches for crimes prosecuted at the federal level, within the 94 US federal judicial districts." That scope does not reach state records, and it does not reach county records either.

According to Goodhire, many employers choose to search both federal and state criminal records for a more comprehensive criminal history. When your hiring plan includes state or county searches, give each one its own line and its own timing figure. Do not treat one federal result as the full criminal history for an applicant.

This article gives no timing figure for a federal-only result or for a state-level search. Do not read the county range above as a federal or state range, and ask the screening provider for the timing of each search line before you set the date.

A simple label helps here: write the scope beside each result, such as federal, state, or county. Keep the federal result and the state or county results apart in the file. A reviewer should be able to tell which search produced which result and which timing figure applies to it.

A federal-only result can be mistaken for a full criminal history if the file does not show its scope. Before the start date is set, compare the search lines in the file against the scope the role requires, and add a line for any state or county search that is missing.

The scope label should travel with the timing figure. If the federal result arrives early, that early result should not move the date for a state or county search that is still running, because each line keeps its own range.

Where vendor speed figures stop

According to Checkr, "97% of customers say Checkr's turnaround time is faster than their previous provider." That figure is a customer claim published on the vendor's own page. It describes that vendor's customers, not your firm's results, and it does not tell you how long your own checks will take.

The sentence compares turnaround with each customer's previous provider, and it gives no number of days. A comparison like that depends on what the earlier provider did, which your file may not record.

The same page gives a second claim. According to Checkr, "after integrating Checkr's background check products with their existing API, Agero saw their turnaround time decrease by 30%." This is one customer's reported result, published by the vendor, so it cannot stand in for your own turnaround.

The integration described there belongs to one customer. A similar setup at your firm would need its own measured record before it is used in a start date plan.

Both figures are vendor statements. Do not carry them into a start date plan as your own results. Instead, record your own turnaround for each check type over time, and compare that record with the ranges in this article.

One simple way to do this is a log. For each check, write the date it was requested, the date results came back, and the check type. Review the log before the next hiring round, and adjust the fallback dates where your own record differs from the ranges above.

Keep the vendor figures in a separate note, so they are not mixed with your own records when someone reviews the file.

Next step before the start date

Write the expected time range for each check beside the proposed start date in the offer file.

After the start date is set, check the file again when results arrive, and note the date each result came back in the log described above.

For more on what belongs in the hiring file, see the background report checklist and the employment verification requirements guide on this site.

Check timing questions

How long does a driving record check take?

According to Checkr, a driving record check averages less than an hour online, but it can take 1-3 business days when physical copies are needed. Plan around the longer figure whenever physical copies are a possibility. If that case is possible, write both ranges beside the proposed start date so the longer one stays visible.

How long can the manual part of a county criminal search take?

According to Goodhire, the manual portion can take between 3 to 30 days, depending on the county or case. Write the county or case that the estimate refers to beside the range, so the date can be traced later. If the county is not named in the file, ask the screening provider to name it before the date is set.

Does a federal background check cover state records?

No, a federal background check does not cover state records. Keep the state or county line in the file even when the federal result arrives first.

When can an employer ask about a criminal conviction under DC code?

According to the DC Council, an employer may not make an inquiry about or require an applicant to disclose or reveal a criminal conviction until after making a conditional offer of employment. Do not read the DC rule as the rule in other states, and in a DC hire, plan the conviction question for after the conditional offer. Record the date of the conditional offer in the file, so the timing of the question can be traced later. For related planning, see conviction timing rules.

Sources