How does Maryland count employees toward the 15-employee threshold?
The Maryland Healthy Working Families Act sets a threshold of 15 employees. Whether an employer reaches it is decided by averaging headcount across the preceding twelve months rather than by looking at any single day. The Maryland Department of Labor's FAQ page, Maryland Healthy Working Families Act Frequently Asked Questions, lays out the arithmetic: "An employer would take the total number of employees working in each month of the preceding year, add the numbers together, and divide by 12."
In practice that means twelve separate counts. You count who worked in Maryland in the first month of the preceding year, then the second, and so on through the twelfth. You add those twelve figures together. You divide the sum by twelve. The result is the average that gets compared to the threshold figure of 15.
This approach matters for staffing teams and hiring managers because headcount moves. Busy seasons bring workers in; quiet stretches let them go. Under a snapshot method, one unusually heavy or light month could decide the outcome. Under an average, months above the line and months below it offset each other, so the question becomes what your staffing looked like across the whole preceding year.
The twelve monthly counts are the raw material of the calculation, which is why the composition of each month's count deserves close attention. A count built from payroll data behaves differently from a count built from a scheduling roster, and the two can disagree when a worker appears on one record and not the other.
Which workers do you include in each month's count?
The Department of Labor's FAQ speaks plainly on this: "All employees of the employer working in Maryland will be considered in determining the 15 employee threshold, including part time, seasonal and temporary employees."
That sentence covers four categories of worker in one line, and each of them belongs in the month or months they worked. A full-time employee on the payroll throughout the year appears in every monthly count. A part-time employee working two days a week appears in the month's count in the same way, with no discount for the shorter schedule. A temporary employee placed for a single week belongs in the count for that week's month and in no others. A seasonal worker hired for a holiday rush or a summer stretch belongs in the months in which they actually worked.
The practical consequence is that the monthly counts shift with the shape of your workforce. If your staffing team runs a busy fourth quarter, the counts for those months will include workers who were not present in the summer months. That variation is expected. It is the reason the rule uses an average across twelve months rather than a single figure on a single date.
The FAQ puts a related question on the page directly: "Does an employer include full-time, part-time, temporary, and seasonal employees in calculating the 15 employee threshold?" The answer thread treats all four as part of the count. None of them is excluded because the hours are short, the assignment is brief, or the work is seasonal.
Do employees under 18 count toward the threshold?
Yes, they do. The FAQ separates the question of counting from the question of the leave benefit itself: "Although an employer is not required to provide sick and safe leave for employees under the age of 18, the employer must include them in the threshold determination."
This is worth pausing on, because the two questions look similar and are not the same. The threshold count asks how many employees the employer has. The leave rules ask who is entitled to paid sick and safe leave. A worker under 18 appears in the first count while falling outside the second. If your team employs summer workers, apprentices, or other employees under the age of 18, those workers raise the monthly figures even though the leave obligation toward them is different.
The FAQ frames the scenario in its own words: "If an employee is under the age of 18 and is not required by law to receive paid sick and safe leave, are they still counted toward the employee threshold?" The answer that follows confirms they are counted. The threshold determination and the leave entitlement run on separate tracks, and a worker can sit on one without sitting on the other.
Do workers in other states enter the Maryland average?
No. The average is built from employees working in Maryland, month by month, across the preceding year. The FAQ poses the multi-state case as a question of its own: "In calculating the 15 employee threshold, does an employer include employees that work in Maryland as well as employees that the employer employs in other states?"
The calculation that follows works only from the Maryland working population. Employees the employer has in other states do not enter the monthly figures and therefore do not enter the average.
For a staffing agency or a multi-state hiring team, this distinction shapes how the number gets built. Your total headcount across every state can be considerably larger than your Maryland figure, and it is the Maryland figure that the threshold turns on. A team with a heavy out-of-state presence and a small Maryland operation should not read its national payroll report as the answer to the threshold question.
Here is how each category of worker is handled in a Maryland monthly count:
| Worker category | Enters the Maryland monthly count? | Counted even without a leave entitlement? |
|---|---|---|
| Full-time employees | Yes | — |
| Part-time employees | Yes | — |
| Temporary employees | Yes | — |
| Seasonal employees | Yes | — |
| Employees under 18 | Yes | Yes |
| Employees in other states | No | — |
The table covers the categories the FAQ addresses. Workers outside Maryland stay out of every monthly figure. Employees under 18 go into the count even when the leave rules do not require paid sick and safe leave for them.
What happens when your headcount sits near 15?
The FAQ names the situation directly: "What if the number of employees an employer has fluctuates around 15?"
Because the measure is a twelve-month average, a fluctuating headcount does not settle the question in the month it happens. A stretch of heavy hiring does not by itself push the average over the line, and a quiet stretch does not by itself pull it back down. What settles the question is the sum of the twelve monthly counts divided by twelve, taken across the preceding year.
The FAQ also raises a related case: "For example, what if the number of employees in the immediately preceding year is 13 but during the following year the number of employees increases to 16?"
That example shows two years pointing in different directions. The preceding year's average is the figure you compare against the threshold at a given point in time. The quoted question asks what happens when the count is 13 in the immediately preceding year and 16 during the following year. The two years are separate calculations, and each is built the same way: twelve monthly counts, a sum, a division by twelve.
If your monthly figures swing above and below 15 throughout the year, the average can land near the line without any single month looking decisive. That is the situation the averaging method is designed to handle, and it is also the situation where a careful record of the twelve counts matters most.
Which employees does the law reach under a collective bargaining agreement entered into before June 1, 2017?
The FAQ addresses this case as well: "If a collective bargaining agreement was entered into before June 1, 2017, does the law apply to the employees covered by that agreement?"
That question sits alongside the threshold questions on the same page and concerns which employees the law reaches under a pre-existing agreement. Staffing teams that operate under such an agreement can find the question on the Maryland Healthy Working Families Act Frequently Asked Questions page.
What is the fastest way to build the twelve monthly counts?
Start with a list of the twelve months of the preceding year. For each month, count every employee who worked in Maryland during that month: full time, part time, temporary, seasonal, and employees under the age of 18 all belong in the figure. Do not include employees who worked only in other states. Add the twelve monthly totals together. Divide the sum by twelve. Compare the result to 15.
Working month by month keeps the categories straight. Seasonal and temporary workers land in the months they worked rather than being missed entirely or counted for the whole year. Out-of-state workers stay out of every monthly figure. Employees under 18 appear even when the leave rules treat them differently.
The payroll and scheduling records most staffing teams already keep are a natural source for the monthly figures. The structure of the calculation stays the same regardless of which records supply the numbers: twelve counts, one sum, one division.
If your team runs placements across several states, build the Maryland count on its own and keep it separate from the wider headcount. The two figures answer different questions, and only the Maryland figure enters this calculation.
Which document should you keep with your calculation?
Keep a record that shows each of the twelve monthly counts, the sum of those counts, and the division by twelve. Alongside the arithmetic, note which workers were included in each month — full time, part time, temporary, seasonal, and under-18 employees working in Maryland — and which were left out because they worked in other states.
That record shows how the average was reached. It also gives you a clean starting point for the next preceding year, since the same twelve-step structure repeats annually.
The Maryland Healthy Working Families Act Frequently Asked Questions page holds the answers to the counting rules, the fluctuation cases, and the multi-state case discussed above. Revisit it when you rebuild the calculation so that each category of worker and each step of the arithmetic matches what the Department of Labor describes.
What should a staffing team do when headcount moves around the threshold?
Build the twelve monthly counts for a preceding year once that year has closed. Each month's count changes with who actually worked in Maryland that month, so a calculation built a year ago describes a year that is no longer the preceding one.
Sum the twelve counts, divide by twelve, and compare the average to 15. If the result sits close to the line, or if one or two months carry unusual weight in your staffing pattern, the Maryland Department of Labor administers these FAQs.
The structure itself does not change from year to year: count who worked in Maryland in each month, include full time, part time, temporary, seasonal, and under-18 workers, leave out employees in other states, sum the twelve months, divide by twelve, and compare the average to 15.
Keeping the twelve monthly figures in a single place makes the next year's calculation quick to rebuild, since only the underlying counts change while the arithmetic stays fixed. A team that reviews its monthly counts as it goes rarely faces a scramble at the end of the preceding year, and it always has the figures at hand when a question about the threshold arises.
Related guides: 3 headcount and pay cutoffs that set your hiring duties · Maryland retail breaks: 3 rules for shift offers · 2 Maryland triggers for new-hire sick leave proof.