Skip forward into hiring notes
RosterAcorn

California hire record fields: 4 items in the state order

For California hires, the motion picture industry order lists four record fields to keep: identification, minors, time records, and total wages.

Key takeaways

  • Identification: record full name, home address, occupation, and social security number for every hire
  • Minors: record birth date and minor designation when the hire is under eighteen
  • Time records: log the start and end of each work period, as it happens
  • Total wages: record wages paid each payroll period, including the value of non-cash compensation furnished

Why four fields, and why they sit in the same file

You set up a file for every new hire. Some entries in that file are useful paperwork. Others are the ones you will need if a claim, an audit, or a wage question ever arrives. This post is about the second group: the four fields the motion picture industry order lists, which are worth keeping in every California hire file you open.

The motion picture industry has an order from the state that spells these items out plainly. The California Department of Industrial Relations publishes that order as Title 8, Section 11120 of the California Code of Regulations. You can read it as a checklist.

A second group of records sits alongside those four: the federal work-authorization file. It is not one of the four, but you will want it in the same folder or system so nothing gets lost. The U.S. Citizenship and Immigration Services page on common Form I-9 questions, published in the Handbook for Employers M-274, is where you go when a question about that form comes up at the desk.

Everything below is written for a recruiter or a small staffing team, sitting with a folder open, deciding what to keep. Just the four fields, in the order you will meet them, plus the surrounding paperwork that keeps the file defensible.

Field one: identification — name, address, job, and number

The first field is the identity block. The state order lists it as full name, home address, occupation, and social security number. Four pieces, one record.

Full name. Take the name exactly as the hire writes it on their forms. Do not tidy it, do not decide which version is "official." If a later document shows a different spelling, keep both and note which one came from where. Consistency between the file and the payroll record saves you a call later.

Home address. A physical address, not a post office box. This is the address the file will be matched against if mail ever needs to reach the person, and it is the address you will compare with the address on the identification document. If the hire moves, update the record and keep the prior version dated.

Occupation. The job title, in plain words. Write what the person actually does, not an internal code. If the hire is a grip, a loader, a craft service runner, write that. The occupation field connects the record to the work being paid for.

Social security number. Collect it, store it, and restrict who can see it. The number is part of the record the state order asks for, so it belongs in the file. It is also the piece you protect hardest: one number, one holder, limited access. In your system, mark it so it is hidden by default and shown only when someone opens the record deliberately.

Put those four together at the top of the file. Everything else hangs off that block. A file that starts with the identity fields is a file you can search, and a file you can search is a file you will find when you need it.

How the identity block is used day to day

You will touch this block more than any other part of the file. Payroll matches on it. The work-authorization paperwork matches on it. Any future correspondence about the placement matches on it. If one piece is wrong, everything downstream takes longer to fix.

A quick habit worth building: read the identity block back to the hire before you close the folder. Four lines, thirty seconds. It catches typos in the social security number, transposed digits in the address, and the wrong job title, all while the person is still in front of you.

Field two: minors — birth date and the minor designation

If the hire is under eighteen, the state order adds a second identity item: birth date, plus a designation that the person is a minor. Two fields, triggered by one condition.

The condition is simple. Anyone under eighteen gets a birth date in the record and a marker that says minor. Anyone eighteen or over does not need either entry under this rule. Your file should still be consistent, though: either the birth date column is filled for everyone, or it is filled only when the age condition applies. Pick one approach and keep it across every file so reviewers do not have to guess. For how other states treat this paperwork, see minor-hire paperwork checks in other states.

The minor designation matters more than it looks. It tells anyone reading the file that extra care may apply to this placement. It tells a supervisor on site. It tells the person who pulls the file months later. A marker that only lives in someone's memory is not a marker.

Birth date also does useful work for records of all ages. Even when the rule does not force it, a birth date helps confirm that two records belong to the same person. A birth date gives you a second line to compare.

What to do when the hire turns eighteen

Set a reminder on the date of the eighteenth birthday. At that point the minor designation no longer applies. Update the marker, keep the birth date if your file keeps it for everyone, and leave the rest of the record untouched. The point of a reminder is that the change happens on schedule, not whenever someone notices.

Field three: time records — start and end of each work period

The third field is not a single line. It is a running log. The state order asks for time records showing when the employee begins and ends each work period.

Read that carefully: each work period, not each day. If a shift splits, if the person leaves and returns, if a day has a break that matters for how the work is counted, the record shows the start and the end of each period separately. A single line that says "worked Tuesday" is not the record the order describes.

Keep the log in a form you can read months later. Dates and times in a consistent format. The name of the work period or the location, if the person works in more than one place. The person who made an entry, if corrections happen.

Corrections. Do not erase. Strike through the wrong entry, write the correct one, initial and date it. An untouched log with visible corrections is more credible than a clean log that changed overnight.

Where the log lives. If your system writes the log automatically, confirm that the entries can be exported and printed as they stand. For a check before the log reaches payroll, see time clock setup before payroll export. A time record spread across three notebooks is a time record you will reconstruct from memory when you need it.

Time records answer the questions that wage disputes raise. They are the difference between a claim you can check and a claim you can only argue about.

Field four: total wages — each payroll period, in full

The fourth field is the wage line. The state order asks for total wages paid each payroll period, including the value of board, lodging, or other compensation actually furnished to the employee.

Two parts to that. First, total wages for the period, not just a rate. The number in the record is what was paid, not what was agreed. Second, non-cash compensation counts: if the placement includes lodging, meals, or anything else of value that you furnished, its value belongs in the total.

That second part catches people out. A rate looks fine on the offer. The wage line in the record tells a different story once non-cash items are counted. Record the value of what you furnished in the same entry as the cash paid, so the two never drift apart.

Keep the payroll-period boundary obvious in the file. If your periods run weekly, the entries line up weekly. If they run biweekly, the entries line up biweekly. The reader of the file should never have to work out the period for an entry.

If a hire's pay is corrected after a period closes, record the correction alongside the original. A later reader sees what was paid first, what was paid after, and when the change happened.

Illustrative example: a split shift

A hire works one day in two blocks, 9 a.m. and 3 p.m. to 6 p.m. The time record shows two work periods, each with its own start and end, and the entry is not complete until both are logged. A reviewer checks the two periods against the wage line first.

A side-by-side view of the four fields

Here is the whole set together in one place, for quick comparison while a file is open.

FieldWhat it holdsTrigger
IdentificationFull name, home address, occupation, social security numberEvery hire
Minor statusBirth date and minor designation Hire under 18
Time recordsStart and end of each work periodEvery work period
Total wages Wages paid, including non-cash compensation furnishedEach payroll period

The work-authorization file that sits beside them

The four fields above are the state-side core. Sitting next to them in the same folder is the federal work-authorization paperwork: Form I-9 and the documents that support it. It is a separate requirement from the four, and it has its own rhythm.

The USCIS page on common Form I-9 questions points to I-9 Central at uscis.gov/i-9-central as the place for further information. Use it when a document question comes up mid-file, because document questions are where files go wrong. If one has already gone wrong, see correcting errors on the work-authorization form after hire.

The agency's rule is that you must accept a listed document from List A, or a combination of one from List B and one from List C, if it reasonably appears genuine and relates to the person presenting it. In practice: you look at what the hire hands you, you judge whether it fits the person in front of you, and you record what you examined.

Remote examination. Some employers examine documents without being in the same room. The option exists for E-Verify participants in good standing, and it comes with a condition: accept copies, then view the originals in a live video interaction, as the Form I-9 instructions and the handbook's remote examination section set out. If you are not in that program, the physical examination path is the one you use.

Where the form lives in your file. Keep the completed form with the hire's other records, in the same system or the same folder. The identification block at the top of the file and the identification documents on the form describe the same person. When both are in one place, mismatches show up early.

One more piece of paper that sometimes lands in the same folder: veteran status paperwork. Keep the self-identification with the file if the placement process calls for it.

Building the folder on day one

Open the file before the first shift, not after. Work in this order.

  • Identity block first. Name, address, occupation, social security number, read back to the hire.
  • Minor check. If under eighteen, add the birth date and the minor marker now.
  • Work-authorization paperwork. Form I-9 and the documents examined, filed with the identity block.
  • Time log ready. Confirm the log exists and that the first entry will be made on the first work period.
  • Wage setup. Confirm the payroll period, the pay rate, and any non-cash items you will furnish, so the wage line can be written correctly from the first period.

A folder built in that order takes a few minutes. A folder built in a hurry takes longer to fix, because every later piece has to be reconciled against the identity block.

What a complete file looks like in your system

If you work in software, map the four fields to your record structure before you add the next hire. Identity as the header record. Minor status as a conditional field that shows when the age condition is met. Time records as a log with a start, an end, and a date.

The time log goes behind it. Wage slips go behind that. The work-authorization form sits at the back where it does not mix with the state-side records but is still in the same place.

Either way, the rule is the same: one hire, one place, four fields visible at the front.

When the file gets tested

Files are quiet until they are not. A question arrives about hours worked on a particular week. The time log answers it. A question arrives about what was paid, and whether non-cash items were counted. The wage line answers it. A question arrives about who this person is and where they live. The identity block answers it. A question arrives about documents examined at hire. The work-authorization paperwork answers it.

The test of your file is not whether it looks tidy on the day you close it. It is whether a colleague who has never met the hire can open it and answer those four questions without calling you.

Next step today: pull one open hire file and check it against the four fields above. Fill any gap before the next payroll period closes.

Frequently asked questions

Does the motion picture order apply to my staffing team? The order covers the motion picture industry, so it applies to your team only if you place workers in that industry. Its four fields are still a useful structure for any hire file.

Do I keep a birth date for every hire? Whether you record birth dates for everyone is your choice. If you do, apply it to every file. If you do not, make sure the minor case is captured every time.

What if the hire has no fixed address on day one? Record the address you have. When the hire gives a permanent one, add it and keep the earlier entry dated. The field's job is to reach the person and to match the file against other records. An address you update beats an address you skip.

How detailed does each work period entry need to be? Each period needs a start and an end. If a shift splits, each part gets its own start and end. Add the location or placement name if the person works in more than one place. Keep the format consistent across every file so you can scan a log quickly.

Does non-cash compensation go on every wage line? It goes on the wage line whenever you furnished board, lodging, or other compensation of value during that payroll period. If nothing non-cash was furnished, the line holds the cash total alone.

Where does Form I-9 fit in the folder? With the hire's other records, in the same folder or system. The identity block and the documents examined on the form describe the same person. Keeping them together is what makes a mismatch visible early rather than late.

Sources