Skip forward into hiring notes
RosterAcorn

Minor hire pay and breaks: 4 checks before posting

Before hiring a minor, check the starting wage, any certificate rate, meal breaks, and paid rest breaks under the applicable state rules.

Key takeaways

  • Confirm the starting rate and when the regular rate begins.
  • Check the special certificate before using a student or apprentice rate.
  • Plan meal and rest breaks separately under the applicable state rules.
  • Review the posting, schedule, and payroll settings together.

Why these figures come first

When a hiring manager writes a job posting, the pay line and the break plan are often the last things anyone checks. Teams copy the rate from last year's ad, fill the shift grid from an old schedule, and send the offer. For an adult hire, that habit usually costs little. For a young worker, it can put the employer out of step with state rules before the first shift starts.

This post covers four figures to check before the job goes live: the starting wage and how long it can last, the lower rate that some student employees and apprentices may be paid under a special certificate, the length of the meal break, and the paid rest break. The wage and meal-break examples include numbers or time limits, and the rules can change from state to state. The examples below come from official pages, and each one names the state it describes. Do not assume that a rule in one state applies in another.

Treat this as a checklist, not as legal advice. Before you post, confirm the current rule with the agency that enforces it. The pages quoted here were checked when this post was written, and rules can change.

A common mistake is to set the pay in one document and the break plan in another. The recruiter writes an hourly rate in the ad, the scheduler builds a long shift block with no break, and the offer letter says something else. Pick one owner for the whole package and check the pay and the breaks together. A rate that is correct on paper can still fail if the schedule does not give the worker the break the rule requires.

The posting is also read by people who are not in the hiring meeting. A young applicant and a parent may read the pay line and the schedule before they ever speak to a recruiter, and a payroll clerk will later use the same words to set up the worker's pay record. Vague wording such as "competitive pay" or "breaks as needed" leaves each reader to guess. Specific wording, with the rate, the period it covers, and the break times, gives everyone the same facts.

Figure 1: the starting wage and its time limit

Texas is a clear example of a starting rate with a time limit. The Texas Workforce Commission's child labor page says: "Sub-minimum wage of $4.25/hour is permissible during the first 90 days in a job." ( Texas Workforce Commission, Child Labor)

Read that sentence closely. It names one rate and one period. Confirm eligibility for the worker and job before using that rate. For a recruiter, that means a posting should mention a training or starting rate only after the employer has confirmed that the state allows it for this job. The offer should also state when the regular rate starts, so the worker and the payroll team are working from the same date.

Payroll needs that date too. If the date lives only in a recruiter's memory, it is likely to be missed when payroll sets up the worker's pay record. For related offer wording, see Texas pay terms.

When a worker moves between roles, changes locations, or returns after a leave, ask the state agency or an employment lawyer how the starting-rate period applies before you assume the clock restarts or keeps running.

Two checks apply to the figure itself. First, compare the posted rate to the minimum wage that applies on the day you publish. Do not rely on a rate copied from an older posting. Second, if your state does not allow a lower starting rate at all, the Texas figure does not help you. Use only the number that applies where the worker will actually work.

Figure 2: the 85 percent rate for student employees and apprentices

A second lower figure appears on the same Texas page: "Other sub-minimum wages (generally, 85% of the current minimum wage) may be permissible under special certificates issued by DOL for certain student employees and apprentices." ( Texas Workforce Commission, Child Labor)

Three phrases in that sentence matter most for hiring. "May" means the rate is not automatic. "Generally" means 85 percent is the usual result, not a fixed rule for every case. "Special certificates issued by DOL" means the rate depends on paperwork from the U.S. Department of Labor, not on the worker's age or the job title alone.

Before you post an 85 percent rate for a student or an apprentice, ask three questions:

  • Is the worker in one of the groups the sentence names: a student employee or an apprentice?
  • Does the employer hold the special certificate that covers this worker and this job?
  • Does the posting explain that the rate depends on that certificate, or does it suggest the lower rate is the default for everyone?

If you cannot answer yes to all three, post the regular rate, or get the certificate in place before the posting goes live. Make sure the job title and duties match what the certificate covers. A certificate that covers one role does not cover a different one just because both sit on the same team.

Keep a copy of the certificate in the hiring file with the date the rate was approved for this job. When the worker's role changes, or when a second student or apprentice is hired into the same team, check the certificate again before you use the same rate. A file that shows the certificate, the job, and the approval date is much easier to produce if the rate is ever questioned.

The same Texas page also covers tipped work. It says: "Children who are tipped employees may be paid the same as other tipped employees." ( Texas Workforce Commission, Child Labor) For restaurants, event staff, and other tipped roles, that means the rate to check is the tipped rate that applies to the job, not a separate youth figure invented for the posting. Confirm first that the job is tipped under the rules for your state. The sentence does not make a non-tipped job tipped.

Figure 3: the 30-minute meal break

Washington's youth employment page gives a specific break length: "Meal breaks must be at least 30 minutes long and be uninterrupted." ( Washington State Department of Labor & Industries, Wages, Rest Breaks & Meal Periods)

This is a Washington rule, and it gives a scheduler two things to check: the planned length and any duties during the break. Answering a register, watching a station, or taking calls interrupts the worker's lunch.

Build the meal break into the shift plan as a fixed block, not as a note at the bottom of the schedule. If the plan says "lunch as needed," the break is not planned, and a supervisor may cover the worker's station without noticing. Put the start time and the end time on the schedule, and tell the worker where the break happens and that they are free of duties during it.

Think about where the meal break falls in the shift, too. A break that sits at the very start or the very end of a shift can leave the worker working through the middle of the day with no planned pause. Placing the break after a set number of hours of work, and then writing that placement into the schedule, makes it easier for a supervisor to see whether the break is actually happening. Review the schedule each week for the first month, because a break that works on paper may be squeezed out when the store or site gets busy.

The same Washington page says: "Meal breaks must be separate and distinct from rest breaks and must be provided in addition to rest breaks." The next section covers the rest break in detail.

The Washington page also points to different rule sections depending on the kind of work. It says: "For non-agricultural rest and meal period requirements see WAC 296-125-111 and WAC 296-125-121." For farm work, it says: "For agricultural rest and meal period requirements see WAC 296-122-100." Before you finalize the schedule, check the section that matches the job. A recruiter who copies break language from a retail posting into a farm posting may be using the wrong rules. For related scheduling checks, see meal break rules for shift handoffs.

Figure 4: the paid rest break and how it counts

The same Washington page includes a rest break rule that affects pay as well as scheduling: "Minors must be allowed a paid rest break, free from work duties." ( Washington State Department of Labor & Industries, Wages, Rest Breaks & Meal Periods)

There are two checks in that sentence: pay and duties. A break where the worker is still expected to watch a station, keep a radio on for calls, or finish a task is not free from work duties. If the job requires a worker to stay on duty, the schedule should show that as working time and the posting should not call it a break.

The page also explains how rest breaks count in pay. It says: "Rest breaks taken are considered “hours worked” when calculating wages, paid sick leave, and overtime." ( Washington State Department of Labor & Industries, Wages, Rest Breaks & Meal Periods)

Check that payroll applies this treatment to rest breaks taken. If your scheduling software deducts break time automatically, check its settings for this job before you publish the posting. A setting that treats every break as unpaid would conflict with the paid rest break rule, and the error can go unnoticed until someone reviews the pay records.

Say the break terms out loud during interviews, too. An applicant who hears that the rest break is paid and the meal break is separate is more likely to ask about the schedule before accepting the offer, which is a far better time to fix a gap than after the first shift. Put the same terms in the offer letter so that the words an applicant heard in the interview and the words they signed match.

Illustrative example: reviewing a meal-break plan

A Washington shift plan shows a 30-minute meal break. During review, the scheduler finds that the worker would still take calls during that block. The scheduler arranges coverage and removes those duties from the break plan before the posting is published. Payroll separately checks the paid rest-break setting. This review catches a conflict between the written break and the duties expected during it.

Before you post: farm work and work permits

North Carolina's youth employment page adds a classification question that can change the pay rules before you do any math. It says: "Farm work is completely exempt from any of the provisions of the North Carolina Wage and Hour Act." ( North Carolina Department of Labor, Youth Employment Rules)

That means you should decide whether the job is farm work before you apply the state's pay rules. An exemption from one law does not remove every other rule, so check the other laws that might apply to the job separately. Do not write "exempt" in a posting as a shortcut. The posting should describe the duties and the pay accurately, and the classification should be recorded in the hiring file.

The same page also sets an order of steps for work permits. It says: "Complete the application process for a work permit after receiving a firm job offer." ( North Carolina Department of Labor, Youth Employment Rules)

Build that order into your hiring steps. Do not promise a start date in the posting or the first conversation as if the permit were already in hand. If your state has its own permit rules, check them on their own terms, because the North Carolina order does not carry over automatically. Use the teen hire permit paperwork checks alongside your offer review.

A checklist before the posting goes live

Before you publish, bring the same people into one review: the recruiter who wrote the ad, the scheduler who built the shift, and the payroll contact who will set up the worker's pay. Each of them should see the rate, the starting period, the break times, and the classification of the job. If a question comes up that this post does not answer, take it to the state agency or to an employment lawyer rather than settling it in the review.

Use this list the day you publish, and have a second person check the numbers against the official page for the state where the job is located:

  • Name the state and the city or county where the work happens. Look up the rules for that place only.
  • Confirm the starting rate, whether a lower starting rate is allowed, and the date the regular rate begins.
  • If you plan to use a special certificate rate, confirm that you hold the certificate and that it covers this worker and this role.
  • Check whether the job is tipped, and use the tipped rate that applies to the job if it is.
  • Write the meal break into the shift plan with a start time, an end time, and a note that the worker is free of duties during it.
  • Confirm that the meal break meets the length and uninterrupted rules that apply in the state.
  • Check the official state page for the rest-break pay rule that applies where the job is.
  • Decide whether the job is farm work, and check which break and wage sections apply.
  • If your state requires a work permit, put the permit steps in the order the state requires.
  • Save a dated copy of the state page you checked, so you can show what you relied on if the posting is questioned later.

Your next step today

Open the current job posting beside its shift plan and payroll settings. Ask the scheduler and payroll contact to review any mismatch before you publish, using the official page for the state where the worker will work.

Questions before you post

Who should review the posting?

The recruiter, scheduler, and payroll contact should review it together. Give each person the same pay terms and shift plan so differences can be corrected before publication.

What should go in the hiring file?

Keep the applicable certificate, the job classification, and a dated copy of the state page you checked. Record the starting-rate end date where payroll can use it.

Sources