Skip forward into hiring notes
RosterAcorn

Workable credit bundles: compare 3 price options

Choose among Workable's three credit bundles by comparing unit prices with your measured usage and budget.

Key takeaways

  • Measure credits used on typical roles before choosing a bundle.
  • Compare upfront spending as well as the price for each credit.
  • Confirm current prices, carry-forward terms and usage reporting before buying.

Why the bundle size matters

If you run hiring for a small staffing team or a company with a steady stream of open roles, you will eventually have to decide how many AI credits to buy. Workable's AI tools, the Workable Agents, are priced on a credit-based, pay-as-you-go model, and you can add credits in bundles when you need more. The Workable Agents announcement lists three bundles, and this post explains how to compare them.

The short version: a bigger bundle costs less for each credit, but it only saves money if your team actually uses the credits. Credits you never spend are money you never got back. So the useful question is not "which bundle is cheapest?" but "which bundle matches how much recruiting work we will send through the agents?"

Prices can change, so check the current pricing before you buy. The figures below come from the bundle prices quoted in the Workable announcement.

Bundle 1: 5,000 credits at $0.12 each

The smallest bundle is 5,000 credits at $0.12 each. It is the highest unit price of the three, so you pay a premium for flexibility.

This bundle suits a team that is testing the agents on one or two roles, or a hiring manager who wants to see how the workflow feels before spending more money. It keeps the upfront spend low and lets you learn your real usage before you buy more.

Bundle 2: 10,000 credits at $0.10 each

The middle bundle is 10,000 credits at $0.10 each. Compared with the smallest bundle, the unit price drops from $0.12 to $0.10, a meaningful cut for a team that will use the credits.

The extra spend over bundle 1 buys 5,000 more credits. To see what those added credits really cost, divide the extra spend by the extra credits. If you know you will use the second batch, that is a good deal. If you are not sure, the marginal cost is the number to watch, because it tells you what each extra credit costs once you already have the first batch.

This bundle is the most likely fit for a small staffing team running several active roles at once, provided your monthly usage is steady enough to use all 10,000 credits.

Bundle 3: 50,000 credits at $0.095 each

The largest bundle is 50,000 credits at $0.095 each. The unit price is the lowest of the three. Compared with bundle 1, the rate falls from $0.12 to $0.095. Compared with bundle 2, it falls from $0.10 to $0.095. The gap between bundles 2 and 3 is small for each credit, so the decision depends mostly on volume and cash flow, not on the unit price.

The extra spend over bundle 2 buys the additional credits beyond the 10,000 in the middle bundle. Divide that added cost by the number of extra credits to find the marginal rate for those credits. You will likely find it is only a little cheaper than the middle bundle's rate, and it means committing a much larger payment up front. Buy this one only if you have clear, sustained demand across many roles.

How the three compare side by side

BundleCreditsPrice for each credit
Smallest5,000$0.12
Middle10,000 $0.10
Largest50,000$0.095

Three points stand out:

  • Unit price drops as the bundle grows, but the drop slows. The biggest change is from bundle 1 to bundle 2.
  • Total cost rises quickly. The largest bundle holds five times as many credits as the middle one, and the bill grows with it.
  • The best value depends on whether you will use the credits before your needs change. Your volume and your budget matter more than the headline rate.

What the credits pay for

The Workable announcement says the Job Brief Agent, Sourcing Agent, Screening Agent, and Engagement Agent work together on creating job briefs, sourcing qualified applicants, evaluating applications, and nurturing talent relationships. Each agent covers a different part of that process, so the credits you spend will depend on which parts you use.

A team that only needs help writing job briefs will use credits differently from a team that runs sourcing, screening, and engagement across every role. Map out which of the four agents you expect to use on a typical role before you choose a bundle.

Workable's AI page also describes the setup step that comes first: "Mark must-haves, add disqualifiers, choose what shows in the job post." The Workable AI page presents these as choices you make for each role. Deciding them deliberately, rather than reusing one setup for everything, is part of planning your usage, because the work you put in at the start shapes what the agents do next.

The gap you still need to measure

Bundle prices alone cannot tell you how many roles your team can handle with a bundle. That means you cannot work out exactly how far a bundle will go from the price list alone. Do not guess. Measure it.

Run a short trial on a real role, or on a few roles. Record the credits used at each step: brief creation, sourcing, screening, and engagement. Note how many roles you ran and roughly how many applicants each one involved. After a trial period that covers a representative mix of roles, you will have a rate you can rely on.

Keep the trial honest. Pick roles that look like your typical work, not only the easiest ones. If your trial shows different usage across roles, account for those differences in your estimate.

When the trial ends, compare the credits you actually used with the credits you expected to use. If the gap is large, find out why before you buy. Maybe one agent consumed most of the balance, or maybe a role took longer to fill than you planned. Either answer changes which bundle makes sense, and either is more useful than the headline price.

A simple way to estimate your monthly need

Once you have a rate from your trial, the math is short:

  • Monthly credits needed = roles you run each month × credits used for each role
  • Months covered by a bundle = bundle credits ÷ monthly credits needed

If a role uses a certain number of credits from start to finish, multiply that by the number of roles you expect to run each month. Then divide each bundle size by that figure. The result tells you how many months each bundle will cover at your current pace.

Be honest about the number of roles. Hiring managers often expect a quiet month and get a busy one, and staffing teams can win a new client quickly. Build in some margin, but not so much that you pay for credits you will never spend.

Illustrative example: estimate monthly usage

Suppose your trial uses 5,000 credits for each role and you expect 2 roles each month. Your illustrative monthly need is 10,000 credits. A 10,000-credit bundle would cover 1 month at that pace. These are illustrative usage figures; replace them with your own trial results.

Common mistakes when choosing a bundle

Several mistakes come up again and again. The first is buying the largest bundle just because it has the lowest unit price. The headline rate is attractive, but the total cost is many times the middle bundle's. If the credits sit unused, the discount is not a discount.

The second mistake is ignoring the marginal cost. Looking only at the average unit price hides what each additional block of credits really costs. Work out the marginal cost between bundles, as shown above, and you will see when the upgrade is worth it.

The third mistake is skipping the trial. Choosing a bundle without any usage data is guessing with someone else's budget. Even a short trial gives you a real starting point.

The fourth mistake is assuming every role uses the same credits. Compare measured usage across your roles before treating them alike. Track roles by type so your estimate reflects your actual mix of work.

The fifth mistake is forgetting that usage belongs to the whole team. If Workable confirms that hiring managers share a credit balance, track their combined use. Agree on who buys credits and who checks the balance.

Who each bundle tends to fit

Hiring managers at companies with a few openings at a time should consider the smallest bundle first. It limits the initial commitment while they measure usage on real roles. Once the trial shows steady use, moving to the middle bundle is a reasonable next step.

Small staffing teams that work across several clients at once have a different pattern. If their measured volume is higher and spread across many roles, the middle bundle may fit. If your agency's volume is predictable from month to month, the largest bundle becomes worth considering, but only after your trial data supports the commitment.

Teams that are still growing should plan for change. A bundle that fits this quarter may not fit next quarter. Choose the option that matches what you expect to need over your next planning period, and keep the next purchase decision on the calendar.

Take the next step today

Create your usage log today and choose a typical role to track, recording which agents you use and the credits consumed.

Questions to ask before you buy

The published prices answer some questions, but not all of them. Before you commit, ask Workable directly:

Does translation use credits?

Confirm whether translation uses credits before budgeting for it. Workable's features page says it can "Translate job posts, applications, and offers into nine languages, supporting global recruitment efforts."

Do unused credits carry forward?

Confirm carry-forward terms in writing. Do not assume they do or do not.

How will you see usage by agent or by role?

Ask Workable how to view usage by agent or role. Visibility into where credits go makes the trial and the monthly estimate far more accurate.

What happens when the balance runs low?

Ask how you are notified and how quickly you can buy another bundle.

Are the prices on the page the prices you will pay?

Confirm the current rates for your account before you sign anything.

Getting clear answers now is far easier than discovering a surprise charge later.

Security and compliance questions

Your choice of bundle is also a choice about data. Workable's features page states that "Workable is ISO 27001, 27017, SOC 2 Type II, and SOC 3 certified to protect your sensitive data." Use this certification list as a starting point when you evaluate the vendor.

They do not, however, describe how your team handles applicant data. Ask for the current audit reports, read what they cover, and check whether the scope matches the services you plan to use. Then decide internally who can see applicant information, how long records are kept, and how you will handle requests from applicants about their data.

Employment rules also matter. Before you use screening tools to rank or reject applicants, talk with your legal or HR adviser about the rules where you hire.

Keep applicant experience in view

Hiring is not only a volume problem. LinkedIn's recruiting basics guide focuses on how a company's approach can shape applicants' perception of it, which is a useful reminder when you automate parts of the process.

During your trial, review the output the Engagement Agent produces for applicants and make sure it sounds like your company. Keep a person in the loop for conversations that matter, such as final-round interviews and offer discussions.

Set up a shared usage log

A simple log turns your trial into a habit. Create a shared spreadsheet or document with one row for each role. Record the role name, the date it opened, the agents used, the credits consumed, and the outcome. Review the log at the end of each month.

The log does three jobs. It shows you the real credits for each role, which feeds your monthly estimate. It gives you a record to discuss when deciding whether to upgrade or reduce the bundle size. And it helps new team members understand what the agents cost and how the team uses them. For a related view of team capacity, see recruiting workload measures.

Keep the log simple. A long, detailed form that nobody fills in is worse than a short one that everyone updates. Start with the columns you need for the estimate and add more only if you have a clear reason.

Checklist before you buy

Use this list to check your decision before you pay:

  • Write down the roles you expect to run each month.
  • Measure credits for each role during a trial that reflects your typical work.
  • Decide which agents you will use: brief, sourcing, screening, and engagement.
  • Calculate months covered for each bundle at your current pace.
  • Compare total cost and marginal cost, not only the unit price.
  • Ask whether translation uses credits and whether unused credits carry forward.
  • Request the current security certification documents and read their scope.
  • Confirm the current prices for your account on Workable's pages.
  • Choose the smallest bundle that covers your next planning period with some margin.

Using AI software to screen job applicants? AI Hiring Paperwork Pack is a workbook filled from your answers that shows which rules reach each tool and the wording applicants should get.

Sources